The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Inhibition of ice nucleation by slippery liquid-infused porous surfaces (SLIPS)
Open accessAbstract
Ice repellent coatings have been studied and keenly sought after for many years, where any advances in the durability of such coatings will result in huge energy savings across many fields. Progress in creating anti-ice and anti-frost surfaces has been particularly rapid since the discovery and development of slippery, liquid infused porous surfaces (SLIPS). Here we use SLIPS-coated differential scanning calorimeter (DSC) pans to investigate the effects of the surface modification on the nucleation of supercooled water. This investigation is inherently different from previous studies which looked at the adhesion of ice to SLIPS surfaces, or the formation of ice under high humidity conditions. Given the stochastic nature of nucleation of ice from supercooled water, multiple runs on the same sample are needed to determine if a given surface coating has a real and statistically significant effect on the nucleation temperature. We have cycled supercooling to freezing and then thawing of deionized water in hydrophilic (untreated aluminum), hydrophobic, superhydrophobic, and SLIPS-treated DSC pans multiple times to determine the effects of surface treatment on the nucleation and subsequent growth of ice. We find that SLIPS coatings lower the nucleation temperature of supercooled water in contact with statistical significance and show no deterioration or change in the coating performance even after 150 freeze-thaw cycles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity
Wong, T.-S., Kang, S. H., Tang, S. K. Y., Smythe, E. J., Hatton, B. D., Grinthal, A., & Aizenberg, J. (2011) · Nature · doi:10.1038/nature10447 · Cited by 4,134
Self-citationDesigning Superoleophobic Surfaces
Tuteja, A., Choi, W., Ma, M., Mabry, J. M., Mazzella, S. A., Rutledge, G. C., McKinley, G. H., & Cohen, R. E. (2007) · Science · doi:10.1126/science.1148326 · Cited by 3,006
Anti-Icing Superhydrophobic Coatings
Cao, L., Jones, A. K., Sikka, V. K., Wu, J., & Gao, D. (2009) · Langmuir · doi:10.1021/la902882b · Cited by 1,497
Liquid-Infused Nanostructured Surfaces with Extreme Anti-Ice and Anti-Frost Performance
Kim, P., Wong, T.-S., Alvarenga, J., Kreder, M. J., Adorno-Martinez, W. E., & Aizenberg, J. (2012) · ACS Nano · doi:10.1021/nn302310q · Cited by 1,316
Self-citationDesign of Ice-free Nanostructured Surfaces Based on Repulsion of Impacting Water Droplets
Mishchenko, L., Hatton, B., Bahadur, V., Taylor, J. A., Krupenkin, T., & Aizenberg, J. (2010) · ACS Nano · doi:10.1021/nn102557p · Cited by 1,217
Self-citationApplications of Bio‐Inspired Special Wettable Surfaces
Yao, X., Song, Y., & Jiang, L. (2011) · Advanced Materials · doi:10.1002/adma.201002689 · Cited by 1,073
Relationships between Water Wettability and Ice Adhesion
Meuler, A. J., Smith, J. D., Varanasi, K. K., Mabry, J. M., McKinley, G. H., & Cohen, R. E. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am1006035 · Cited by 849
Mimicking the Lotus Effect: Influence of Double Roughness Structures and Slender Pillars
Patankar, N. A. (2004) · Langmuir · doi:10.1021/la048629t · Cited by 823
Are Superhydrophobic Surfaces Best for Icephobicity?
Jung, S., Dorrestijn, M., Raps, D., Das, A., Megaridis, C. M., & Poulikakos, D. (2011) · Langmuir · doi:10.1021/la104762g · Cited by 695
Delayed Freezing on Water Repellent Materials
Tourkine, P., Le Merrer, M., & Quéré, D. (2009) · Langmuir · doi:10.1021/la900929u · Cited by 488
Cited by
Design of anti-icing surfaces: smooth, textured or slippery?
Kreder, M. J., Alvarenga, J., Kim, P., & Aizenberg, J. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.3 · Cited by 1,505
Self-citationBio-Inspired Strategies for Anti-Icing
Lv, J., Song, Y., Jiang, L., & Wang, J. (2014) · ACS Nano · doi:10.1021/nn406522n · Cited by 1,009
Bioinspired Super‐Wettability from Fundamental Research to Practical Applications
Wen, L., Tian, Y., & Jiang, L. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201409911 · Cited by 673
Icephobic materials: Fundamentals, performance evaluation, and applications
Shen, Y., Wu, X., Tao, J., Zhu, C., Lai, Y., & Chen, Z. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.03.004 · Cited by 441
Condensation heat transfer on superhydrophobic surfaces
Miljkovic, N., & Wang, E. N. (2013) · MRS Bulletin · doi:10.1557/mrs.2013.103 · Cited by 410
Robust and durable liquid-repellent surfaces
Chen, F., Wang, Y., Tian, Y., Zhang, D., Song, J., Crick, C. R., Carmalt, C. J., Parkin, I. P., & Lu, Y. (2022) · Chemical Society Reviews · doi:10.1039/d0cs01033b · Cited by 378
Surface engineering for phase change heat transfer: A review
Attinger, D., Frankiewicz, C., Betz, A. R., Schutzius, T. M., Ganguly, R., Das, A., Kim, C.-J., & Megaridis, C. M. (2014) · MRS Energy & Sustainability · doi:10.1557/mre.2014.9 · Cited by 376
Peppou-Chapman, S., Hong, J. K., Waterhouse, A., & Neto, C. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00036a · Cited by 373
Physics of Icing and Rational Design of Surfaces with Extraordinary Icephobicity
Schutzius, T. M., Jung, S., Maitra, T., Eberle, P., Antonini, C., Stamatopoulos, C., & Poulikakos, D. (2015) · Langmuir · doi:10.1021/la502586a · Cited by 356
Sojoudi, H., Wang, M., Boscher, N. D., McKinley, G. H., & Gleason, K. K. (2016) · Soft Matter · doi:10.1039/c5sm02295a · Cited by 352
Environmental Applications of Interfacial Materials with Special Wettability
Wang, Z., Elimelech, M., & Lin, S. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.5b04351 · Cited by 352
Ice Adhesion on Lubricant-Impregnated Textured Surfaces
Subramanyam, S. B., Rykaczewski, K., & Varanasi, K. K. (2013) · Langmuir · doi:10.1021/la402456c · Cited by 339
Bioinspired Engineering of Thermal Materials
Tao, P., Shang, W., Song, C., Shen, Q., Zhang, F., Luo, Z., Yi, N., Zhang, D., & Deng, T. (2015) · Advanced Materials · doi:10.1002/adma.201401449 · Cited by 311
Urata, C., Dunderdale, G. J., England, M. W., & Hozumi, A. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02690c · Cited by 297
Fundamentals of icing and common strategies for designing biomimetic anti-icing surfaces
Li, Q., & Guo, Z. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta03259a · Cited by 292
Magnetic slippery extreme icephobic surfaces
Irajizad, P., Hasnain, M., Farokhnia, N., Sajadi, S. M., & Ghasemi, H. (2016) · Nature Communications · doi:10.1038/ncomms13395 · Cited by 284
Zhang, J., Gu, C., & Tu, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00972 · Cited by 274
Latthe, S. S., Sutar, R. S., Bhosale, A. K., Nagappan, S., Ha, C.-S., Sadasivuni, K. K., Liu, S., & Xing, R. (2019) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2019.105373 · Cited by 273
Slippery Lubricant‐Infused Surfaces: Properties and Emerging Applications
Li, J., Ueda, E., Paulssen, D., & Levkin, P. A. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201802317 · Cited by 264
Huang, X., Tepylo, N., Pommier-Budinger, V., Budinger, M., Bonaccurso, E., Villedieu, P., & Bennani, L. (2019) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2019.01.002 · Cited by 262
Superhydrophobic coatings for corrosion protection of magnesium alloys
Yao, W., Liang, W., Huang, G., Jiang, B., Atrens, A., & Pan, F. (2020) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.02.055 · Cited by 257
Yin, X., Zhang, Y., Wang, D., Liu, Z., Liu, Y., Pei, X., Yu, B., & Zhou, F. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501101 · Cited by 253
Economics of Snow Accumulation on Photovoltaic Modules
Abou Yassine, A. H., Khoshbakhtnejad, E., & Sojoudi, H. (2024) · Energies · doi:10.3390/en17122962 · Cited by 24
Metadata
- Authors
- Wilson, P. W., Lu, W., Xu, H., Kim, P., Kreder, M. J., Alvarenga, J., & Aizenberg, J.
- Venue
- Phys. Chem. Chem. Phys.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 15
- Issue
- 2
- Pages
- 581-585
- ISSN
- 1463-9076 (ISSN-L)
- 1463-9084
- OpenAlex
- W2102658404
- Cited by
- 341
- References
- 18
- FWCI
- 7.09
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.