The DOI matches its Crossref record; 162 of the 162 references it cites were found in a registry or an index.
Surface engineering for phase change heat transfer: A review
Open accessAbstract
Owing to advances in micro- and nanofabrication methods over the last two decades, the degree of sophistication with which solid surfaces can be engineered today has caused a resurgence of interest in the topic of engineering surfaces for phase change heat transfer. This review aims at bridging the gap between the material sciences and heat transfer communities. It makes the argument that optimum surfaces need to address the specificities of phase change heat transfer in the way that a key matches its lock. This calls for the design and fabrication of adaptive surfaces with multiscale textures and non-uniform wettability. Among numerous challenges to meet the rising global energy demand in a sustainable manner, improving phase change heat transfer has been at the forefront of engineering research for decades. The high heat transfer rates associated with phase change heat transfer are essential to energy and industry applications; but phase change is also inherently associated with poor thermodynamic efficiency at low heat flux, and violent instabilities at high heat flux. Engineers have tried since the 1930s to fabricate solid surfaces that improve phase change heat transfer. The development of micro and nanotechnologies has made feasible the high-resolution control of surface texture and chemistry over length scales ranging from molecular levels to centimeters. This paper reviews the fabrication techniques available for metallic and silicon-based surfaces, considering sintered and polymeric coatings. The influence of such surfaces in multiphase processes of high practical interest, e.g., boiling, condensation, freezing, and the associated physical phenomena are reviewed. The case is made that while engineers are in principle able to manufacture surfaces with optimum nucleation or thermofluid transport characteristics, more theoretical and experimental efforts are needed to guide the design and cost-effective fabrication of surfaces that not only satisfy the existing technological needs, but also catalyze new discoveries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
de Gennes, P. G. (1985) · Reviews of Modern Physics · doi:10.1103/revmodphys.57.827 · Cited by 7,207
Purity of the sacred lotus, or escape from contamination in biological surfaces
Barthlott, W., & Neinhuis, C. (1997) · Planta · doi:10.1007/s004250050096 · Cited by 6,860
III. An essay on the cohesion of fluids
Young, T. (1805) · Philosophical Transactions of the Royal Society of London · doi:10.1098/rstl.1805.0005 · Cited by 6,643
Transparent, Conductive Graphene Electrodes for Dye-Sensitized Solar Cells
Wang, X., Zhi, L., & Müllen, K. (2008) · Nano Letters · doi:10.1021/nl072838r · Cited by 4,467
Super‐Hydrophobic Surfaces: From Natural to Artificial
Feng, L., Li, S., Li, Y., Li, H., Zhang, L., Zhai, J., Song, Y., Liu, B., Jiang, L., & Zhu, D. (2002) · Advanced Materials · doi:10.1002/adma.200290020 · Cited by 4,404
Formation of monolayer films by the spontaneous assembly of organic thiols from solution onto gold
Bain, C. D., Troughton, E. B., Tao, Y. T., Evall, J., Whitesides, G. M., & Nuzzo, R. G. (1989) · Journal of the American Chemical Society · doi:10.1021/ja00183a049 · Cited by 3,393
Light-induced amphiphilic surfaces
Wang, R., Hashimoto, K., Fujishima, A., Chikuni, M., Kojima, E., Kitamura, A., Shimohigoshi, M., & Watanabe, T. (1997) · Nature · doi:10.1038/41233 · Cited by 3,384
Lafuma, A., & Quéré, D. (2003) · Nature Materials · doi:10.1038/nmat924 · Cited by 3,315
Cited by
Design of anti-icing surfaces: smooth, textured or slippery?
Kreder, M. J., Alvarenga, J., Kim, P., & Aizenberg, J. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.3 · Cited by 1,505
Nanoengineered materials for liquid–vapour phase-change heat transfer
Cho, H. J., Preston, D. J., Zhu, Y., & Wang, E. N. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.92 · Cited by 657
Physics of Icing and Rational Design of Surfaces with Extraordinary Icephobicity
Schutzius, T. M., Jung, S., Maitra, T., Eberle, P., Antonini, C., Stamatopoulos, C., & Poulikakos, D. (2015) · Langmuir · doi:10.1021/la502586a · Cited by 356
Self-citationAdvances in solar evaporator materials for freshwater generation
Cao, S., Jiang, Q., Wu, X., Ghim, D., Gholami Derami, H., Chou, P.-I., Jun, Y.-S., & Singamaneni, S. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta06034k · Cited by 287
Three-Dimensional Superhydrophobic Nanowire Networks for Enhancing Condensation Heat Transfer
Wen, R., Xu, S., Ma, X., Lee, Y.-C., & Yang, R. (2018) · Joule · doi:10.1016/j.joule.2017.11.010 · Cited by 282
Metadata
- Authors
- Attinger, D., Frankiewicz, C., Betz, A. R., Schutzius, T. M., Ganguly, R., Das, A., Kim, C.-J., & Megaridis, C. M.
- Venue
- MRS Energy & Sustainability
- Published
- 2014-01
- Volume
- 1
- Issue
- 1
- ISSN
- 2329-2229 (ISSN-L)
- 2329-2237
- OpenAlex
- W2118885665
- Cited by
- 376
- References
- 162
- FWCI
- 26.88
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Surface engineering for phase change heat transfer: A review. https://app.cochat.ai/papers/10.1557/mre.2014.9
- The paper
- Attinger, D., Frankiewicz, C., Betz, A. R., Schutzius, T. M., Ganguly, R., Das, A., Kim, C.-J., & Megaridis, C. M. (2014). Surface engineering for phase change heat transfer: A review. MRS Energy & Sustainability. https://doi.org/10.1557/mre.2014.9
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.