The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
The relative importance of domain size, domain purity and domain interfaces to the performance of bulk-heterojunction organic photovoltaics
Open accessAbstract
The domain size, domain purity and interfacial width between domains for a bulk heterojunction are controllably altered through use of Cahn–Hilliard modeling and their relative effect on OPV performance is predicted using Monte Carlo modeling. It is found that locally sharp, well-connected domains of only 4 nm extent out perform morphologies with broadened interfaces and/or impure domains even when domain sizes were at the ‘optimum’ size of ∼10 nm. More generally, these data provide information on the most effective method to optimize the as-cast bulk heterojunction morphology depending upon initial domain purity and the nature of interfaces between domains. Further, it indicates why morphology optimization is more effective for some blends than others. It is shown that the quench depth of the blend can be used as a general technique to control the interfacial structure of the morphology and realize substantial increases in short circuit photocurrent.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Entropy of Charge Separation in Organic Photovoltaic Cells: The Benefit of Higher Dimensionality
Gregg, B. A. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz2012403 · Cited by 245
Cited by
Organic Optoelectronic Materials: Mechanisms and Applications
Ostroverkhova, O. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00127 · Cited by 1,680
Ye, L., Hu, H., Ghasemi, M., Wang, T., Collins, B. A., Kim, J.-H., Jiang, K., Carpenter, J. H., Li, H., Li, Z., et al. (2018) · Nature Materials · doi:10.1038/s41563-017-0005-1 · Cited by 707
Determining the optimum morphology in high-performance polymer-fullerene organic photovoltaic cells
Hedley, G. J., Ward, A. J., Alekseev, A., Howells, C. T., Martins, E. R., Serrano, L. A., Cooke, G., Ruseckas, A., & Samuel, I. D. W. (2013) · Nature Communications · doi:10.1038/ncomms3867 · Cited by 349
Ma, W., Tumbleston, J. R., Wang, M., Gann, E., Huang, F., & Ade, H. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200912 · Cited by 306
Ye, L., Zhao, W., Li, S., Mukherjee, S., Carpenter, J. H., Awartani, O., Jiao, X., Hou, J., & Ade, H. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602000 · Cited by 268
Metadata
- Authors
- Lyons, B. P., Clarke, N., & Groves, C.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 5
- Issue
- 6
- Pages
- 7657
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2009813094
- Cited by
- 172
- References
- 1
- FWCI
- 13.43
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.