The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte
Abstract
Bulk heterojunction (BHJ) polymer solar cells (PSCs) that can be fabricated by solution processing techniques are under intense investigation in both academic institutions and industrial companies because of their potential to enable mass production of flexible and cost-effective alternative to silicon-based solar cells. A combination of novel polymer development, nanoscale morphology control and processing optimization has led to over 8% power conversion efficiencies (PCEs) for BHJ PSCs with a conventional device structure. Attempts to develop PSCs with an inverted device structure as required for achieving high PECs and good stability have, however, met with limited success. Here, we report that a high PCE of 8.4% under AM 1.5G irradiation was achieved for BHJ PSCs with an inverted device structure. This high efficiency was obtained through interfacial engineering of solution-processed electron extraction layer, leading to facilitate electron transport and suppress bimolecular recombination. These results provided an important progress for solution-processed PSCs, and demonstrated that PSCs with an inverted device structure are comparable with PSCs with the conventional device structure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency
Scharber, M. C., Mühlbacher, D., Koppe, M., Denk, P., Waldauf, C., Heeger, A. J., & Brabec, C. J. (2006) · Advanced Materials · doi:10.1002/adma.200501717 · Cited by 5,205
Ma, W., Yang, C., Gong, X., Lee, K., & Heeger, A. J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200500211 · Cited by 4,565
Self-citationPolymer solar cells with enhanced open-circuit voltage and efficiency
Chen, H.-Y., Hou, J., Zhang, S., Liang, Y., Yang, G., Yang, Y., Yu, L., Wu, Y., & Li, G. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.192 · Cited by 3,087
Stability/degradation of polymer solar cells
Jørgensen, M., Norrman, K., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.005 · Cited by 2,335
He, Z., Zhong, C., Huang, X., Wong, W., Wu, H., Chen, L., Su, S., & Cao, Y. (2011) · Advanced Materials · doi:10.1002/adma.201103006 · Cited by 2,134
Recombination in polymer-fullerene bulk heterojunction solar cells
Cowan, S. R., Roy, A., & Heeger, A. J. (2010) · Physical Review B · doi:10.1103/physrevb.82.245207 · Cited by 2,071
Modeling photocurrent action spectra of photovoltaic devices based on organic thin films
Pettersson, L. A. A., Roman, L. S., & Inganäs, O. (1999) · Journal of Applied Physics · doi:10.1063/1.370757 · Cited by 1,642
Sun, Y., Seo, J. H., Takacs, C. J., Seifter, J., & Heeger, A. J. (2011) · Advanced Materials · doi:10.1002/adma.201004301 · Cited by 1,545
Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer
Dou, L., You, J., Yang, J., Chen, C.-C., He, Y., Murase, S., Moriarty, T., Emery, K., Li, G., & Yang, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2011.356 · Cited by 1,416
Chen, L., Hong, Z., Li, G., & Yang, Y. (2009) · Advanced Materials · doi:10.1002/adma.200802854 · Cited by 1,267
Cited by
Stability of organic solar cells: challenges and strategies
Cheng, P., & Zhan, X. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00593k · Cited by 1,046
Zhang, Z.-G., Qi, B., Jin, Z., Chi, D., Qi, Z., Li, Y., & Wang, J. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00022f · Cited by 835
Fill factor in organic solar cells
Qi, B., & Wang, J. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp51383a · Cited by 732
Ye, L., Zhang, S., Huo, L., Zhang, M., & Hou, J. (2014) · Accounts of Chemical Research · doi:10.1021/ar5000743 · Cited by 699
Low bandgap semiconducting polymers for polymeric photovoltaics
Liu, C., Wang, K., Gong, X., & Heeger, A. J. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00650c · Cited by 555
Self-citationMa, W., Tumbleston, J. R., Wang, M., Gann, E., Huang, F., & Ade, H. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200912 · Cited by 306
Self-citationOrganic Solar Cell Materials toward Commercialization
Xue, R., Zhang, J., Li, Y., & Li, Y. (2018) · Small · doi:10.1002/smll.201801793 · Cited by 304
Li, C., Chueh, C., Ding, F., Yip, H., Liang, P., Li, X., & Jen, A. K. ‐. (2013) · Advanced Materials · doi:10.1002/adma.201300580 · Cited by 278
Tofa, T. S., Ye, F., Kunjali, K. L., & Dutta, J. (2019) · Catalysts · doi:10.3390/catal9100819 · Cited by 253
High-Efficiency Small Molecule-Based Bulk-Heterojunction Solar Cells Enhanced by Additive Annealing
Li, L., Xiao, L., Qin, H., Gao, K., Peng, J., Cao, Y., Liu, F., Russell, T. P., & Peng, X. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b06691 · Cited by 40
Self-citationLiu, C., Zhang, L., Xiao, L., Peng, X., & Cao, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10264 · Cited by 35
Arrechea, S., Molina-Ontoria, A., Aljarilla, A., de la Cruz, P., Langa, F., & Echegoyen, L. (2015) · Dyes and Pigments · doi:10.1016/j.dyepig.2015.04.037 · Cited by 33
Montcada, N. F., Arrechea, S., Molina-Ontoria, A., Aljarilla, A. I., de la Cruz, P., Echegoyen, L., Palomares, E., & Langa, F. (2016) · Organic Electronics · doi:10.1016/j.orgel.2016.09.003 · Cited by 16
Metadata
- Authors
- Yang, T., Wang, M., Duan, C., Hu, X., Huang, L., Peng, J., Huang, F., & Gong, X.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 5
- Issue
- 8
- Pages
- 8208
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2170938508
- Cited by
- 656
- References
- 32
- FWCI
- 59.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
