The DOI matches its Crossref record.
Advanced intermediate-temperature Na–S battery
Abstract
In this study, we reported an intermediate-temperature (∼150 °C) sodium–sulfur (Na–S) battery. With a relatively low operating temperature, this novel battery could reduce the cost and safety issues associated with the conventional high-temperature (300–350 °C) Na–S battery. A dense β′′-Al2O3 solid membrane and tetraglyme were utilized as the electrolyte separator and catholyte solvent in this battery. Solubility tests indicated that a cathode mixture of Na2S4 and S exhibited extremely high solubility in tetraglyme (e.g., >4.1 M for Na2S4 + 4 S). CV scans of Na2S4 in tetraglyme revealed two pairs of redox couples with peaks at around 2.22 and 1.75 V, corresponding to the redox reactions of polysulfide species. The discharge/charge profiles of the Na–S battery showed a slope region and a plateau, indicating multiple steps and cell reactions. In situ Raman measurements during battery operation suggested that polysulfide species were formed in the sequence of Na2S5 + S → Na2S5 + Na2S4 → Na2S4 + Na2S2 during discharge and in a reverse order during charge. This battery showed dramatic improvement in rate capacity and cycling stability over room-temperature Na–S batteries, which makes it more attractive for renewable energy integration and other grid related applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Gür, T. M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01419a · Cited by 2,566
Rechargeable Batteries for Grid Scale Energy Storage
Zhu, Z., Jiang, T., Ali, M., Meng, Y., Jin, Y., Cui, Y., & Chen, W. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00289 · Cited by 1,769
Recent Progress in Electrode Materials for Sodium‐Ion Batteries
Kim, H., Kim, H., Ding, Z., Lee, M. H., Lim, K., Yoon, G., & Kang, K. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600943 · Cited by 986
High temperature sodium batteries: status, challenges and future trends
Hueso, K. B., Armand, M., & Rojo, T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24086j · Cited by 774
Two‐Dimensional Materials for Beyond‐Lithium‐Ion Batteries
Peng, L., Zhu, Y., Chen, D., Ruoff, R. S., & Yu, G. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600025 · Cited by 645
A High‐Energy Room‐Temperature Sodium‐Sulfur Battery
Xin, S., Yin, Y., Guo, Y., & Wan, L. (2014) · Advanced Materials · doi:10.1002/adma.201304126 · Cited by 632
A room-temperature sodium–sulfur battery with high capacity and stable cycling performance
Xu, X., Zhou, D., Qin, X., Lin, K., Kang, F., Li, B., Shanmukaraj, D., Rojo, T., Armand, M., & Wang, G. (2018) · Nature Communications · doi:10.1038/s41467-018-06443-3 · Cited by 563
Emerging Nonaqueous Aluminum‐Ion Batteries: Challenges, Status, and Perspectives
Zhang, Y., Liu, S., Ji, Y., Ma, J., & Yu, H. (2018) · Advanced Materials · doi:10.1002/adma.201706310 · Cited by 504
From lithium to sodium: Cell chemistry of room temperature sodium–air and sodium–sulfur batteries
Adelhelm, P., Hartmann, P., Bender, C. L., Busche, M., Eufinger, C., & Janek, J. (2015) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.6.105 · Cited by 478
Eshetu, G. G., Elia, G. A., Armand, M., Forsyth, M., Komaba, S., Rojo, T., & Passerini, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000093 · Cited by 470
Selenium@Mesoporous Carbon Composite with Superior Lithium and Sodium Storage Capacity
Luo, C., Xu, Y., Zhu, Y., Liu, Y., Zheng, S., Liu, Y., Langrock, A., & Wang, C. (2013) · ACS Nano · doi:10.1021/nn403108w · Cited by 439
Zhang, B.-W., Sheng, T., Liu, Y.-D., Wang, Y.-X., Zhang, L., Lai, W.-H., Wang, L., Yang, J., Gu, Q.-F., Chou, S.-L., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-06144-x · Cited by 414
Cui, Y., Abouimrane, A., Lu, J., Bolin, T., Ren, Y., Weng, W., Sun, C., Maroni, V. A., Heald, S. M., & Amine, K. (2013) · Journal of the American Chemical Society · doi:10.1021/ja402597g · Cited by 387
M. Gür, T. (2018) · Energy & Environmental Science · doi:10.1039/c8ee90053a · Cited by 374
Superior Stable and Long Life Sodium Metal Anodes Achieved by Atomic Layer Deposition
Zhao, Y., Goncharova, L. V., Lushington, A., Sun, Q., Yadegari, H., Wang, B., Xiao, W., Li, R., & Sun, X. (2017) · Advanced Materials · doi:10.1002/adma.201606663 · Cited by 366
Wang, Y., Zhang, B., Lai, W., Xu, Y., Chou, S., Liu, H., & Dou, S. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602829 · Cited by 349
Commercial and research battery technologies for electrical energy storage applications
Cho, J., Jeong, S., & Kim, Y. (2015) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2015.01.002 · Cited by 328
Revitalising sodium–sulfur batteries for non-high-temperature operation: a crucial review
Wang, Y., Zhou, D., Palomares, V., Shanmukaraj, D., Sun, B., Tang, X., Wang, C., Armand, M., Rojo, T., & Wang, G. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02203a · Cited by 327
Challenges of today for Na-based batteries of the future: From materials to cell metrics
Hasa, I., Mariyappan, S., Saurel, D., Adelhelm, P., Koposov, A. Y., Masquelier, C., Croguennec, L., & Casas-Cabanas, M. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228872 · Cited by 305
Nanostructured positive electrode materials for post-lithium ion batteries
Wang, F., Wu, X., Li, C., Zhu, Y., Fu, L., Wu, Y., & Liu, X. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02070d · Cited by 293
Wang, Y., Hou, B., Guo, J., Ning, Q., Pang, W., Wang, J., Lü, C., & Wu, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703252 · Cited by 267
Metadata
- Authors
- Lu, X., Kirby, B. W., Xu, W., Li, G., Kim, J. Y., Lemmon, J. P., Sprenkle, V. L., & Yang, Z.
- Venue
- Energy Environ. Sci.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 6
- Issue
- 1
- Pages
- 299-306
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2060404931
- Cited by
- 187
- References
- 0
- FWCI
- 5.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.