The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Bio-based epoxy resin from itaconic acid and its thermosets cured with anhydride and comonomers
Abstract
A novel itaconic acid (IA) based epoxy resin with curable double bonds (EIA) was synthesized by the esterification reaction between IA and epichlorohydrin (ECH). Its chemical structure was confirmed in detail by FT-IR, 1H-NMR and ESI-ION TRAP MS before being cured by methyl hexahydrophthalic anhydride (MHHPA). In order to manipulate the properties of the cured resin, divinyl benzene (DVB) and acrylated epoxidized soybean oil (AESO) were employed here to act as comonomers. The results demonstrated that EIA showed a higher epoxy value of 0.625 and higher curing reactivity toward MHHPA compared with the commonly used diglycidyl ether of bisphenol A (DGEBA). The glass transition temperature, tensile strength, flexural strength and modulus of the cured EIA without comonomers were 130.4 °C, 87.5 MPa, 152.4 MPa and 3400 MPa, respectively, which were comparable or better than those of DGEBA cured by the same curing agent. After being copolymerized with DVB or AESO, the properties of the cured EIA could be regulated further. The results indicated that EIA has great potential to replace the petroleum-based thermosetting resin, such as DGEBA.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bozell, J. J., & Petersen, G. R. (2010) · Green Chemistry · doi:10.1039/b922014c · Cited by 4,566
Variation of peak temperature with heating rate in differential thermal analysis
Kissinger, H. E. (1956) · Journal of Research of the National Bureau of Standards · doi:10.6028/jres.057.026 · Cited by 3,924
Polymer Science: A Comprehensive Reference
(2012) · Elsevier eBooks · doi:10.1016/c2009-1-28406-1 · Cited by 1,114
Plastics derived from biological sources: present and future: a technical and environmental review
Chen, G.-Q., & Patel, M. K. (2012) · Chemical Reviews · doi:10.1021/cr200162d · Cited by 997
Current research on the blends of natural and synthetic polymers as new biomaterials: Review
Sionkowska, A. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.05.003 · Cited by 970
Thermosetting (bio)materials derived from renewable resources: A critical review
Raquez, J.-M., Deléglise, M., Lacrampe, M.-F., & Krawczak, P. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.01.001 · Cited by 910
Bisphenol A exposure, effects, and policy: A wildlife perspective
Flint, S., Markle, T., Thompson, S., & Wallace, E. (2012) · Journal of Environmental Management · doi:10.1016/j.jenvman.2012.03.021 · Cited by 884
Toughening tetrafunctional epoxy resins using polyetherimide
Bucknall, C. B., & Gilbert, A. H. (1989) · Polymer · doi:10.1016/0032-3861(89)90107-9 · Cited by 566
Epoxy Polymers: New Materials and Innovations
(2010) · Wiley eBooks · doi:10.1002/9783527628704 · Cited by 479
Industrial bioconversion of renewable resources as an alternative to conventional chemistry
Willke, T., & Vorlop, K.-D. (2004) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-004-1733-0 · Cited by 390
Cited by
Biobased Thermosetting Epoxy: Present and Future
Auvergne, R., Caillol, S., David, G., Boutevin, B., & Pascault, J.-P. (2014) · Chemical Reviews · doi:10.1021/cr3001274 · Cited by 1,159
Alternative Monomers Based on Lignocellulose and Their Use for Polymer Production
Delidovich, I., Hausoul, P. J. C., Deng, L., Pfützenreuter, R., Rose, M., & Palkovits, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00354 · Cited by 773
Recent advances in vegetable oil-based polymers and their composites
Zhang, C., Garrison, T. F., Madbouly, S. A., & Kessler, M. R. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.12.009 · Cited by 669
Self-citationVanillin-Derived High-Performance Flame Retardant Epoxy Resins: Facile Synthesis and Properties
Wang, S., Ma, S., Xu, C., Liu, Y., Dai, J., Wang, Z., Liu, X., Chen, J., Shen, X., Wei, J., et al. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b00097 · Cited by 491
Self-citationLiu, J., Wang, S., Peng, Y., Zhu, J., Zhao, W., & Liu, X. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101353 · Cited by 418
Self-citationItaconic acid – a versatile building block for renewable polyesters with enhanced functionality
Robert, T., & Friebel, S. (2016) · Green Chemistry · doi:10.1039/c6gc00605a · Cited by 333
Synthesis and Characterization of Bio-based Epoxy Resins Derived from Vanillyl Alcohol
Hernandez, E. D., Bassett, A. W., Sadler, J. M., La Scala, J. J., & Stanzione, J. F. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00835 · Cited by 307
Biobased vitrimers: Towards sustainable and adaptable performing polymer materials
Lucherelli, M. A., Duval, A., & Avérous, L. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101515 · Cited by 291
Sustainable Epoxy Vitrimers from Epoxidized Soybean Oil and Vanillin
Zhao, X.-L., Liu, Y.-Y., Weng, Y., Li, Y.-D., & Zeng, J.-B. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c05727 · Cited by 277
Recent Development of Biobased Epoxy Resins: A Review
Kumar, S., Samal, S. K., Mohanty, S., & Nayak, S. K. (2018) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2016.1253742 · Cited by 268
Zhong, L., Hao, Y., Zhang, J., Wei, F., Li, T., Miao, M., & Zhang, D. (2022) · Macromolecules · doi:10.1021/acs.macromol.1c02247 · Cited by 266
Metadata
- Authors
- Ma, S., Liu, X., Jiang, Y., Tang, Z., Zhang, C., & Zhu, J.
- Venue
- Green Chem.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 15
- Issue
- 1
- Pages
- 245-254
- ISSN
- 1463-9262 (ISSN-L)
- 1463-9270
- OpenAlex
- W1975924624
- Cited by
- 346
- References
- 25
- FWCI
- 14.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.