The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Bio-based epoxy resin from itaconic acid and its thermosets cured with anhydride and comonomers
Abstract
A novel itaconic acid (IA) based epoxy resin with curable double bonds (EIA) was synthesized by the esterification reaction between IA and epichlorohydrin (ECH). Its chemical structure was confirmed in detail by FT-IR, 1H-NMR and ESI-ION TRAP MS before being cured by methyl hexahydrophthalic anhydride (MHHPA). In order to manipulate the properties of the cured resin, divinyl benzene (DVB) and acrylated epoxidized soybean oil (AESO) were employed here to act as comonomers. The results demonstrated that EIA showed a higher epoxy value of 0.625 and higher curing reactivity toward MHHPA compared with the commonly used diglycidyl ether of bisphenol A (DGEBA). The glass transition temperature, tensile strength, flexural strength and modulus of the cured EIA without comonomers were 130.4 °C, 87.5 MPa, 152.4 MPa and 3400 MPa, respectively, which were comparable or better than those of DGEBA cured by the same curing agent. After being copolymerized with DVB or AESO, the properties of the cured EIA could be regulated further. The results indicated that EIA has great potential to replace the petroleum-based thermosetting resin, such as DGEBA.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bozell, J. J., & Petersen, G. R. (2010) · Green Chemistry · doi:10.1039/b922014c · Cited by 4,566
Variation of peak temperature with heating rate in differential thermal analysis
Kissinger, H. E. (1956) · Journal of Research of the National Bureau of Standards · doi:10.6028/jres.057.026 · Cited by 3,924
Polymer Science: A Comprehensive Reference
(2012) · Elsevier eBooks · doi:10.1016/c2009-1-28406-1 · Cited by 1,114
Plastics derived from biological sources: present and future: a technical and environmental review
Chen, G.-Q., & Patel, M. K. (2012) · Chemical Reviews · doi:10.1021/cr200162d · Cited by 997
Current research on the blends of natural and synthetic polymers as new biomaterials: Review
Sionkowska, A. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.05.003 · Cited by 970
Thermosetting (bio)materials derived from renewable resources: A critical review
Raquez, J.-M., Deléglise, M., Lacrampe, M.-F., & Krawczak, P. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.01.001 · Cited by 910
Bisphenol A exposure, effects, and policy: A wildlife perspective
Flint, S., Markle, T., Thompson, S., & Wallace, E. (2012) · Journal of Environmental Management · doi:10.1016/j.jenvman.2012.03.021 · Cited by 884
Toughening tetrafunctional epoxy resins using polyetherimide
Bucknall, C. B., & Gilbert, A. H. (1989) · Polymer · doi:10.1016/0032-3861(89)90107-9 · Cited by 566
Epoxy Polymers: New Materials and Innovations
(2010) · Wiley eBooks · doi:10.1002/9783527628704 · Cited by 479
Industrial bioconversion of renewable resources as an alternative to conventional chemistry
Willke, T., & Vorlop, K.-D. (2004) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-004-1733-0 · Cited by 390
Calculation of crosslink density in short chain networks
Hill, L. W. (1997) · Progress in Organic Coatings · doi:10.1016/s0300-9440(97)00081-7 · Cited by 374
Xie, F., Halley, P. J., & Avérous, L. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.07.002 · Cited by 301
Stemmelen, M., Pessel, F., Lapinte, V., Caillol, S., Habas, J., & Robin, J. (2011) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.24674 · Cited by 287
Preparation and properties of bio-based epoxy networks derived from isosorbide diglycidyl ether
Chrysanthos, M., Galy, J., & Pascault, J. (2011) · Polymer · doi:10.1016/j.polymer.2011.06.001 · Cited by 240
Synthesis and characterization of kraft lignin-based epoxy resins
Mansouri, N. E., Yuan, Q., & Huang, F. (2011) · BioResources · doi:10.15376/biores.6.3.2492-2503 · Cited by 176
Characterization of alkaline lignins for use in phenol-formaldehyde and epoxy resins
El Mansouri, N.-E., Yuan, Q., & Huang, F. (2011) · BioResources · doi:10.15376/biores.6.3.2647-2662 · Cited by 163
Preparation of a bio-based epoxy with comparable properties to those of petroleum-based counterparts
Liu, X. Q., Huang, W. Q., Jiang, Y., Zhu, J., & Zhang, C. Z. (2012) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2012.32 · Cited by 143
Self-citationShibata, M., & Nakai, K. (2010) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21903 · Cited by 131
The Mycota. A comprehensive treatise on fungi as experimental systems for basic and applied research
Skovgaard, N. (2002) · International Journal of Food Microbiology · doi:10.1016/s0168-1605(02)00042-9 · Cited by 120
High‐performance biobased epoxy derived from rosin
Liu, X., & Zhang, J. (2010) · Polymer International · doi:10.1002/pi.2781 · Cited by 91
Self-citationImpact of Structure and Functionality of Core Polyol in Highly Functional Biobased Epoxy Resins
Xiao, P., & Webster, D. C. (2011) · Macromolecular Rapid Communications · doi:10.1002/marc.201100215 · Cited by 73
Syntheses and characterizations of thermally degradable epoxy resins. III
Li, H., Wang, L., Jacob, K. I., & Wong, C. P. (2002) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.10258 · Cited by 64
Heera, T. R., & Cindrella, L. (2010) · International Journal of Polymeric Materials · doi:10.1080/00914031003760725 · Cited by 53
Process monitoring of fibre reinforced composites using optical fibre sensors
Fernando, G. F., & Degamber, B. (2006) · International Materials Reviews · doi:10.1179/174328006x79481 · Cited by 45
Thermally degradable thermosetting materials
Khosravi, E., & Musa, O. M. (2010) · European Polymer Journal · doi:10.1016/j.eurpolymj.2010.09.023 · Cited by 42
Cited by
Biobased Thermosetting Epoxy: Present and Future
Auvergne, R., Caillol, S., David, G., Boutevin, B., & Pascault, J.-P. (2014) · Chemical Reviews · doi:10.1021/cr3001274 · Cited by 1,159
Alternative Monomers Based on Lignocellulose and Their Use for Polymer Production
Delidovich, I., Hausoul, P. J. C., Deng, L., Pfützenreuter, R., Rose, M., & Palkovits, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00354 · Cited by 773
Recent advances in vegetable oil-based polymers and their composites
Zhang, C., Garrison, T. F., Madbouly, S. A., & Kessler, M. R. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.12.009 · Cited by 669
Self-citationVanillin-Derived High-Performance Flame Retardant Epoxy Resins: Facile Synthesis and Properties
Wang, S., Ma, S., Xu, C., Liu, Y., Dai, J., Wang, Z., Liu, X., Chen, J., Shen, X., Wei, J., et al. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b00097 · Cited by 491
Self-citationLiu, J., Wang, S., Peng, Y., Zhu, J., Zhao, W., & Liu, X. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101353 · Cited by 418
Self-citation
Metadata
- Authors
- Ma, S., Liu, X., Jiang, Y., Tang, Z., Zhang, C., & Zhu, J.
- Venue
- Green Chem.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 15
- Issue
- 1
- Pages
- 245-254
- ISSN
- 1463-9262 (ISSN-L)
- 1463-9270
- OpenAlex
- W1975924624
- Cited by
- 346
- References
- 25
- FWCI
- 14.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.