The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Facile preparation of robust and biocompatible chitin aerogels
Abstract
Chitin, poly(N-acetylglucosamine), was fabricated into nanoporous aerogels by using aqueous NaOH–urea solution as solvent and ethanol as coagulant. The chitin solution showed rapid temperature-induced gelation. Subsequently, highly porous and mechanically strong chitin aerogels were prepared by gelation of chitin solution from ethanol, followed by supercritical CO2 drying. The chitin hydrogel was composed of a percolating nanofibril network of about 20 nm width. By using supercritical CO2 drying, the network structure in the hydrogel was well preserved in the aerogel. Our chitin aerogels exhibit low density (0.23–0.27 g cm−3), large surface area (up to 366 m2 g−1), moderate thermal stability and high physical integrity up to 270 °C, significantly high mechanical properties, and biocompatibility. Our findings are expected to lead to potential applications of chitin aerogels and allow for the fabrication of biomaterials, heat or sound insulators, catalyst supports and many others.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemistry of Aerogels and Their Applications
Pierre, A. C., & Pajonk, G. M. (2002) · Chemical Reviews · doi:10.1021/cr0101306 · Cited by 2,239
Cited by
Hydrogels based on cellulose and chitin: fabrication, properties, and applications
Shen, X., Shamshina, J. L., Berton, P., Gurau, G., & Rogers, R. D. (2016) · Green Chemistry · doi:10.1039/c5gc02396c · Cited by 669
Zhao, D., Huang, J., Zhong, Y., Li, K., Zhang, L., & Cai, J. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201601645 · Cited by 539
Self-citationA Special Material or a New State of Matter: A Review and Reconsideration of the Aerogel
Du, A., Zhou, B., Zhang, Z., & Shen, J. (2013) · Materials · doi:10.3390/ma6030941 · Cited by 481
Ziegler, C., Wolf, A., Liu, W., Herrmann, A., Gaponik, N., & Eychmüller, A. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201611552 · Cited by 419
Recent advances in chitin based materials constructed via physical methods
Duan, B., Huang, Y., Lu, A., & Zhang, L. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.04.001 · Cited by 386
Self-citation
Metadata
- Authors
- Ding, B., Cai, J., Huang, J., Zhang, L., Chen, Y., Shi, X., Du, Y., & Kuga, S.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 22
- Issue
- 12
- Pages
- 5801
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2038566333
- Cited by
- 191
- References
- 1
- FWCI
- 5.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.