The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Reduced graphene oxide–polyaniline hybrid: Preparation, characterization and its applications for ammonia gas sensing
Abstract
Here we present a useful ammonia (NH3) gas sensor based on reduced graphene oxide (RGO)–polyaniline (PANI) hybrids. PANI nanoparticles were successfully anchored on the surface of RGO sheets by using RGO–MnO2 hybrids as both of the templates and oxidants for aniline monomer during the process of polymerization. The resultant RGO–PANI hybrids were characterized by transmittance electron microscopy, infrared spectroscopy, Raman spectroscopy, UV-Vis spectroscopy, and scanning electron microscopy. The NH3 gas sensing performance of the hybrids was also investigated and compared with those of the sensors based on bare PANI nanofibers and bare RGO sheets. It was revealed that the synergetic behavior between both of the candidates allowed excellent sensitivity and selectivity to NH3 gas. The RGO–PANI hybrid device exhibited much better (3.4 and 10.4 times, respectively, with the concentration of NH3 gas at 50 ppm) response to NH3 gas than those of the bare PANI nanofiber sensor and bare graphene device. The combination of the RGO sheets and PANI nanoparticles facilitated the enhancement of the sensing properties of the final hybrids, and pave a new avenue for the application of RGO–PANI hybrids in the gas sensing field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene
Lee, C., Wei, X., Kysar, J. W., & Hone, J. (2008) · Science · doi:10.1126/science.1157996 · Cited by 20,847
Graphene: Status and Prospects
Geim, A. K. (2009) · Science · doi:10.1126/science.1158877 · Cited by 13,942
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
Experimental observation of the quantum Hall effect and Berry's phase in graphene
Zhang, Y., Tan, Y.-W., Stormer, H. L., & Kim, P. (2005) · Nature · doi:10.1038/nature04235 · Cited by 13,435
Self-citationProcessable aqueous dispersions of graphene nanosheets
Li, D., Müller, M. B., Gilje, S., Kaner, R. B., & Wallace, G. G. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.451 · Cited by 9,114
Graphene-Based Ultracapacitors
Stoller, M. D., Park, S., Zhu, Y., An, J., & Ruoff, R. S. (2008) · Nano Letters · doi:10.1021/nl802558y · Cited by 8,373
Detection of individual gas molecules adsorbed on graphene
Schedin, F., Geim, A. K., Morozov, S. V., Hill, E. W., Blake, P., Katsnelson, M. I., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1967 · Cited by 8,028
Honeycomb Carbon: A Review of Graphene
Allen, M. J., Tung, V. C., & Kaner, R. B. (2010) · Chemical Reviews · doi:10.1021/cr900070d · Cited by 6,998
Perry, J. H. (1950) · Journal of Chemical Education · doi:10.1021/ed027p533.1 · Cited by 3,807
Reduced Graphene Oxide Molecular Sensors
Robinson, J. T., Perkins, F. K., Snow, E. S., Wei, Z., & Sheehan, P. E. (2008) · Nano Letters · doi:10.1021/nl8013007 · Cited by 1,772
Cited by
Nanostructured Materials for Room‐Temperature Gas Sensors
Zhang, J., Liu, X., Neri, G., & Pinna, N. (2016) · Advanced Materials · doi:10.1002/adma.201503825 · Cited by 1,569
Environmental applications of graphene-based nanomaterials
Perreault, F., Fonseca de Faria, A., & Elimelech, M. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00021a · Cited by 1,528
Recent advances in graphene based gas sensors
Varghese, S. S., Lonkar, S., Singh, K. K., Swaminathan, S., & Abdala, A. (2015) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2015.04.062 · Cited by 890
Yang, S., Jiang, C., & Wei, S.-H. (2017) · Applied Physics Reviews · doi:10.1063/1.4983310 · Cited by 876
Flexible Graphene-Based Wearable Gas and Chemical Sensors
Singh, E., Meyyappan, M., & Nalwa, H. S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07063 · Cited by 776
Electrically-Transduced Chemical Sensors Based on Two-Dimensional Nanomaterials
Meng, Z., Stolz, R. M., Mendecki, L., & Mirica, K. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00311 · Cited by 773
Chemical sensing with 2D materials
Anichini, C., Czepa, W., Pakulski, D., Aliprandi, A., Ciesielski, A., & Samorì, P. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00417j · Cited by 756
Graphene–metal oxide nanohybrids for toxic gas sensor: A review
Gupta Chatterjee, S., Chatterjee, S., Ray, A. K., & Chakraborty, A. K. (2015) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2015.07.070 · Cited by 737
A Review on Graphene-Based Gas/Vapor Sensors with Unique Properties and Potential Applications
Wang, T., Huang, D., Yang, Z., Xu, S., He, G., Li, X., Hu, N., Yin, G., He, D., & Zhang, L. (2016) · Nano-Micro Letters · doi:10.1007/s40820-015-0073-1 · Cited by 600
Self-citationXu, Y., Bai, P., Zhou, X., Akimov, Y., Png, C. E., Ang, L., Knoll, W., & Wu, L. (2019) · Advanced Optical Materials · doi:10.1002/adom.201801433 · Cited by 519
Recent Progress on Flexible Room-Temperature Gas Sensors Based on Metal Oxide Semiconductor
Ou, L.-X., Liu, M.-Y., Zhu, L.-Y., Zhang, D. W., & Lu, H.-L. (2022) · Nano-Micro Letters · doi:10.1007/s40820-022-00956-9 · Cited by 402
Two-dimensional layered nanomaterials for gas-sensing applications
Yang, W., Gan, L., Li, H., & Zhai, T. (2016) · Inorganic Chemistry Frontiers · doi:10.1039/c5qi00251f · Cited by 376
Low-cost and flexible printed graphene–PEDOT:PSS gas sensor for ammonia detection
Seekaew, Y., Lokavee, S., Phokharatkul, D., Wisitsoraat, A., Kerdcharoen, T., & Wongchoosuk, C. (2014) · Organic Electronics · doi:10.1016/j.orgel.2014.08.044 · Cited by 373
Graphene-based hybrids for chemiresistive gas sensors
Meng, F.-L., Guo, Z., & Huang, X.-J. (2015) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2015.02.008 · Cited by 337
Self-citationA review on advances in application of polyaniline for ammonia detection
Tanguy, N. R., Thompson, M., & Yan, N. (2018) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2017.11.008 · Cited by 284
Ultrafast and sensitive room temperature NH3 gas sensors based on chemically reduced graphene oxide
Hu, N., Yang, Z., Wang, Y., Zhang, L., Wang, Y., Huang, X., Wei, H., Wei, L., & Zhang, Y. (2014) · Nanotechnology · doi:10.1088/0957-4484/25/2/025502 · Cited by 281
Self-citationZhang, H., Xie, A., Wang, C., Wang, H., Shen, Y., & Tian, X. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11278k · Cited by 276
Synergy between nanomaterials and volatile organic compounds for non-invasive medical evaluation
Broza, Y. Y., Vishinkin, R., Barash, O., Nakhleh, M. K., & Haick, H. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00317c · Cited by 276
Graphene-based polyaniline nanocomposites: preparation, properties and applications
Wang, L., Lu, X., Lei, S., & Song, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13462h · Cited by 264
Makhado, E., & Seleka, W. M. (2025) · Scientific Reports · doi:10.1038/s41598-025-13976-3 · Cited by 20
Metadata
- Authors
- Huang, X., Hu, N., Gao, R., Yu, Y., Wang, Y., Yang, Z., Siu-Wai Kong, E., Wei, H., & Zhang, Y.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 22
- Issue
- 42
- Pages
- 22488
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2064582684
- Cited by
- 348
- References
- 36
- FWCI
- 14.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.