Yttrium catalysts for syndioselective β-butyrolactone polymerization: on the origin of ligand-induced stereoselectivity
Open accessThe DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Abstract
Synthesis of aliphatic polyesters has been studied intensively due to their biocompatible and biodegradable properties and their applications in medical and agricultural fields. Among them, polyhydroxybutyrate (PHB), which is a naturally occurring polymer, is synthesized by a variety of bacteria and algae. However, this polymer has poor mechanical properties due to its brittleness. Herein is presented a practical route to a highly syndiotactic PHB by way of a one-pot reaction. We report the results of a comprehensive investigation of the newly discovered stereoselective and controlled polymerization of racemic β-butyrolactone (rac-BBL) using an initiator prepared in situ from yttrium(III) isopropoxide Y(OiPr)3, and a bisphenoxide ligand. DFT studies on the alkoxide catalyst reveal that the R and S monomers are almost equivalent for the first ring-opening reaction. The selectivity of the next insertion was scrutinized, demonstrating that the polymerization process is predicted to be stationary (back-side insertion).
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The calculated activation barrier of the initiation stage was ~15 kcal/mol, and the chelate complex formed after the initiation stage was used of the model catalytic complex for the simulation of the propagation stage.”
From Coordination ring-opening polymerization of cyclic esters: A critical overview of DFT modeling and visualization of the reaction mechanisms (2019) · cites this paper as [37]
In the citing paper
“The results of calculations confirmed the preference of syndiotactic poly(βBL) formation without regard to the stereochemistry of the first inserted βBL molecule.”
From Coordination ring-opening polymerization of cyclic esters: A critical overview of DFT modeling and visualization of the reaction mechanisms (2019) · cites this paper as [37]
Citations
Cites
Synthesis, structure and properties of polyhydroxyalkanoates: biological polyesters
Sudesh, K., Abe, H., & Doi, Y. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00035-6 · Cited by 2,254
Chemical syntheses of biodegradable polymers
Okada, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(01)00039-9 · Cited by 1,199
Stereocontrolled ring-opening polymerisation of lactide
Stanford, M. J., & Dove, A. P. (2010) · Chem. Soc. Rev. · doi:10.1039/b815104k · Cited by 876
Thomas, C. M. (2010) · Chem. Soc. Rev. · doi:10.1039/b810065a · Cited by 853
Self-citationApplications of PHB - a microbially produced biodegradable thermoplastic
Holmes, P. A. (1985) · Physics in Technology · doi:10.1088/0305-4624/16/1/305 · Cited by 824
Synthesis of biodegradable polymers from renewable resources
Tschan, M. J.-L., Brulé, E., Haquette, P., & Thomas, C. M. (2012) · Polym. Chem. · doi:10.1039/c2py00452f · Cited by 428
Self-citationRieth, L. R., Moore, D. R., Lobkovsky, E. B., & Coates, G. W. (2002) · Journal of the American Chemical Society · doi:10.1021/ja020978r · Cited by 413
Poly(hydroxyalkanoates): A Fifth Class of Physiologically Important Organic Biopolymers?
Müller, H., & Seebach, D. (1993) · Angewandte Chemie International Edition in English · doi:10.1002/anie.199304771 · Cited by 363
The regulation of poly-β-hydroxybutyrate metabolism in Azotobacter beijerinckii
Senior, P. J., & Dawes, E. A. (1973) · Biochemical Journal · doi:10.1042/bj1340225 · Cited by 352
Amgoune, A., Thomas, C. M., Ilinca, S., Roisnel, T., & Carpentier, J. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200600058 · Cited by 320
Self-citation
Research works printed but not linked: 1
- Schechtman, 2000, PCT Int. Appl., WO 0077072
Cited by
Tschan, M. J. ‐., Gauvin, R. M., & Thomas, C. M. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00356a · Cited by 171
Self-citationLigny, R., Hänninen, M. M., Guillaume, S. M., & Carpentier, J.-F. (2018) · Chemical Communications · doi:10.1039/c8cc03842b · Cited by 88
Towards sustainable polymer chemistry with homogeneous metal-based catalysts
Schröder, K., Matyjaszewski, K. A., Noonan, K. J. T., & Mathers, R. T. (2013) · Green Chemistry · doi:10.1039/c3gc42159g · Cited by 88
Ligny, R., Hänninen, M. M., Guillaume, S. M., & Carpentier, J. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201704283 · Cited by 77
Zhuo, Z., Zhang, C., Luo, Y., Wang, Y., Yao, Y., Yuan, D., & Cui, D. (2018) · Chemical Communications · doi:10.1039/c8cc05469j · Cited by 76
Nifant’ev, I., & Ivchenko, P. (2019) · Molecules · doi:10.3390/molecules24224117 · Cited by 72
“[37] at the B3PW91 level of theory [51,52] in order to clarify the experimental fact of formation of syndiotactic polymer.”
BackgroundResultStrianese, M., Pappalardo, D., Mazzeo, M., Lamberti, M., & Pellecchia, C. (2020) · Dalton Transactions · doi:10.1039/d0dt02639e · Cited by 68
Jaffredo, C. G., Carpentier, J.-F., & Guillaume, S. M. (2013) · Macromolecules · doi:10.1021/ma401332k · Cited by 67
Fang, J., Yu, I., Mehrkhodavandi, P., & Maron, L. (2013) · Organometallics · doi:10.1021/om400399k · Cited by 59
Self-citationTschan, M. J.-L., Guo, J., Raman, S. K., Brulé, E., Roisnel, T., Rager, M.-N., Legay, R., Durieux, G., Rigaud, B., & Thomas, C. M. (2014) · Dalton Transactions · doi:10.1039/c3dt52629a · Cited by 51
Self-citationProperties, production, and modification of polyhydroxyalkanoates
Liang, X., Cha, D., & Xie, Q. (2024) · Resources, Conservation & Recycling Advances · doi:10.1016/j.rcradv.2024.200206 · Cited by 58
Ebrahimi, T., Aluthge, D. C., Hatzikiriakos, S. G., & Mehrkhodavandi, P. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b01908 · Cited by 59
Dong, X., & Robinson, J. R. (2020) · Chemical Science · doi:10.1039/d0sc03507f · Cited by 51
Tabthong, S., Nanok, T., Kongsaeree, P., Prabpai, S., & Hormnirun, P. (2013) · Dalton Transactions · doi:10.1039/c3dt52455h · Cited by 55
Xu, Y., Ren, W., Zhou, H., Gu, G., & Lu, X. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b00239 · Cited by 50
Li, H., Zhao, N., Ren, C., Liu, S., & Li, Z. (2017) · Polymer Chemistry · doi:10.1039/c7py01673e · Cited by 49
Altenbuchner, P. T., Kronast, A., Kissling, S., Vagin, S. I., Herdtweck, E., Pöthig, A., Deglmann, P., Loos, R., & Rieger, B. (2015) · Chemistry – A European Journal · doi:10.1002/chem.201501156 · Cited by 46
Replacing Tin in Lactide Polymerization: Design of Highly Active Germanium‐Based Catalysts
Guo, J., Haquette, P., Martin, J., Salim, K., & Thomas, C. M. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201306623 · Cited by 41
Self-citationStereoselective synthesis of biodegradable polymers by salen-type metal catalysts
Liao, X., Su, Y., & Tang, X. (2022) · Science China Chemistry · doi:10.1007/s11426-022-1377-5 · Cited by 41
Agatemor, C., Arnold, A. E., Cross, E. D., Decken, A., & Shaver, M. P. (2013) · Journal of Organometallic Chemistry · doi:10.1016/j.jorganchem.2013.08.023 · Cited by 42
Synthesis of heterotactic PLA from rac-lactide using hetero-bimetallic Mg/Zn–Li systems
Char, J., Brulé, E., Gros, P. C., Rager, M.-N., Guérineau, V., & Thomas, C. M. (2015) · Journal of Organometallic Chemistry · doi:10.1016/j.jorganchem.2015.02.038 · Cited by 30
Self-citationSumrit, P., & Hormnirun, P. (2013) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201300333 · Cited by 28
Dong, X., Brown, A. M., Woodside, A. J., & Robinson, J. R. (2022) · Chemical Communications · doi:10.1039/d1cc05127j · Cited by 27
Pappalardo, D., Bruno, M., Lamberti, M., & Pellecchia, C. (2013) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201200737 · Cited by 30
Fagerland, J., Finne-Wistrand, A., & Pappalardo, D. (2016) · New Journal of Chemistry · doi:10.1039/c6nj00298f · Cited by 26
Shakaroun, R. M., Li, H., Jéhan, P., Blot, M., Alaaeddine, A., Carpentier, J.-F., & Guillaume, S. M. (2021) · Polymer Chemistry · doi:10.1039/d1py00669j · Cited by 25
Ligny, R., Guillaume, S. M., & Carpentier, J. (2019) · Chemistry – A European Journal · doi:10.1002/chem.201900413 · Cited by 24
Domiński, A., Konieczny, T., Zięba, M., Klim, M., & Kurcok, P. (2019) · Polymers · doi:10.3390/polym11071221 · Cited by 26
Phosphasalalen Rare-Earth Complexes for the Polymerization of rac-Lactide and rac-β-Butyrolactone
Liu, H., & Shi, X. (2021) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.0c02741 · Cited by 22
Thioetherphenolate group 4 metal complexes in the ring opening polymerization of rac‐β‐Butyrolactone
Luciano, E., Buonerba, A., Grassi, A., Milione, S., & Capacchione, C. (2016) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.28198 · Cited by 22
Liu, S., Zhang, J., Zuo, W., Zhang, W., Sun, W., Ye, H., & Li, Z. (2017) · Polymers · doi:10.3390/polym9030083 · Cited by 20
Kiriratnikom, J., Robert, C., Guérineau, V., Venditto, V., & Thomas, C. M. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00301 · Cited by 19
“As expected for syndiotactic PHBs, Pr values of PHB in PDL-b-PHB are high (up to 0.90 syndiotacticity), for all diblock copolymers with 5–25 mol% ε-DL (Table 3, Entries 2–5), although we observed slight differences in the PHB microstructures depending on the reaction conditions (e.g., the concentration of monomer) (Am…”
BackgroundMethodSelf-citationLuke, A. M., Peterson, A. A., Chiniforoush, S., Mandal, M., Popowski, Y., Sajjad, H., Bouchey, C. J., Shopov, D. Y., Graziano, B. J., Yao, L. J., et al. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c00092 · Cited by 22
Adams, F., Pehl, T. M., Kränzlein, M., Kernbichl, S., Kang, J., Papadakis, C. M., & Rieger, B. (2020) · Polymer Chemistry · doi:10.1039/d0py00379d · Cited by 18
Pappalardo, D., Bruno, M., Lamberti, M., Mazzeo, M., & Pellecchia, C. (2013) · Journal of Molecular Catalysis A Chemical · doi:10.1016/j.molcata.2013.08.031 · Cited by 19
Ligny, R., Hänninen, M. M., Guillaume, S. M., & Carpentier, J. (2017) · Angewandte Chemie · doi:10.1002/ange.201704283 · Cited by 16
Ring‐Opening Polymerization Strategies for Degradable Polyesters
Narmon, A. S., Jenisch, L. M., Pitet, L. M., & Dusselier, M. (2022) · Wiley eBooks · doi:10.1002/9783527827589.ch7 · Cited by 16
Low-Symmetry β-Diketimine Aryloxide Rare-Earth Complexes: Flexible, Reactive, and Selective
Casey, K. C., Appiah, J. K., & Robinson, J. R. (2020) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.0c02170 · Cited by 14
Duan, R., Hu, C., Sun, Z., Pang, X., & Chen, X. (2018) · ACS Omega · doi:10.1021/acsomega.8b01997 · Cited by 11
Wang, Y., Mehmood, A., Zhao, Y., Qu, J., & Luo, Y. (2017) · Inorganics · doi:10.3390/inorganics5030046 · Cited by 10
Liu, J.-M., Cao, Q., Fang, Q.-Y., Xie, M., Yang, Y., Yu, D., Cai, Z., & Zhu, J. (2026) · Journal of the American Chemical Society · doi:10.1021/jacs.6c01637 · Cited by 8
Ring‐Opening Polymerization of Lactide
Sutar, A. K., Maharana, T., Routaray, A., & Nath, N. (2015) · Wiley eBooks · doi:10.1002/9781118998939.ch6 · Cited by 7
Copolymerisation of β‐butyrolactone and γ‐butyrolactone using yttrium amine bis(phenolate) catalysts
Catchpole, P., & Platel, R. H. (2022) · Polymer International · doi:10.1002/pi.6429 · Cited by 8
Capacchione, C., Grisi, F., Lamberti, M., Mazzeo, M., Milani, B., Milione, S., Pappalardo, D., Zuccaccia, C., & Pellecchia, C. (2023) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.202200644 · Cited by 6
Replacing Tin in Lactide Polymerization: Design of Highly Active Germanium‐Based Catalysts
Guo, J., Haquette, P., Martin, J., Salim, K., & Thomas, C. M. (2013) · Angewandte Chemie · doi:10.1002/ange.201306623 · Cited by 5
Self-citationSequence-Controlled Ring-Opening Polymerization: Synthesis of New Polyester Structures
Brûlé, E., Robert, C., & Thomas, C. M. (2014) · ACS symposium series · doi:10.1021/bk-2014-1170.ch023 · Cited by 5
Self-citationFang, J., Tschan, M. J. ‐., Brûlé, E., Robert, C., Thomas, C. M., & Maron, L. (2013) · Dalton Transactions · doi:10.1039/c3dt00039g · Cited by 4
Self-citationTang, X. (2022) · Advances in polymer science · doi:10.1007/12_2022_119 · Cited by 4
Synthesis, Characterization, and Reactivity Studies of New Cyclam-Based Y(III) Complexes
Madeira, F., Veiros, L. F., Alves, L. G., & Martins, A. M. (2023) · Molecules · doi:10.3390/molecules28247998 · Cited by 2
Topochemical Synthesis of a Syndiotactic Polymer from a Racemic Monomer
Gupta, S. K., Khazeber, R., Siddharth, K. S., Balakrishnan, A., & Sureshan, K. M. (2025) · Journal of the American Chemical Society · doi:10.1021/jacs.5c18292 · Cited by 2
Catalytic Performance of Metal Alkoxides
Mirzaee, M., Norouzi, M., Amoli, A., & Ashrafian, A. (2015) · Wiley eBooks · doi:10.1002/9781118998939.ch7
Fink, J. K. (2014) · Wiley eBooks · doi:10.1002/9781118837283.ch4
Fink, J. K. (2019) · Wiley eBooks · doi:10.1002/9781119681373.ch4
Shi, Y., Wang, Y., Yuan, D., & Yao, Y. (2024) · Chemistry - An Asian Journal · doi:10.1002/asia.202400820
Green chemistry infographics for research-led instruction
Hurst, G. A., Farmer, T. J., & Jesper, S. (2025) · Sustainable Chemistry and Pharmacy · doi:10.1016/j.scp.2025.102007
Supported Lanthanum Complexes : Grafting and Reactivity
Bathelier, A. (2020) · theses.fr (ABES) · doi:10.70675/2bf42aadz44e4z458bz9f98zb1eb17a7e834
Shakaroun, R. M. (2021) · theses.fr (ABES) · doi:10.70675/2f088127z472bz4b2fzb9bfza1f8d1bdb9b1 · Cited by 4
Metadata
- Authors
- Fang, J., Tschan, M. J.-L., Roisnel, T., Trivelli, X., Gauvin, R. M., Thomas, C. M., & Maron, L.
- Affiliations
- Centre National de la Recherche Scientifique (FR)
- Université Rennes 1 (FR)
- Corresponding author
- Thomas, Christophe M.
- Maron, Laurent
- ORCID
- Venue
- Polym. Chem.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 4
- Issue
- 2
- Pages
- 360-367
- ISSN
- 1759-9954 (ISSN-L)
- 1759-9962
- OpenAlex
- W2015020661
- Cited by
- 59
- References
- 49
- Citations by year
- 2026: 1 · 2025: 2 · 2024: 3 · 2023: 2 · 2022: 6 · 2021: 4 · 2020: 6 · 2019: 5 · 2018: 3 · 2017: 6 · 2016: 3 · 2015: 4 · 2014: 3 · 2013: 11
- FWCI
- 2.33
- Type
- journal article
- Language
- en
- Open access
- green
- 202.201.7.4:8080
- Licence
- cc-by-nc-nd
- Locations
- Polymer Chemistry (publishedVersion)
- HAL (submittedVersion)
- Lanzhou University Institutional Repository (submittedVersion, cc-by-nc-nd)
- Funders
- Agence Nationale de la Recherche (ANR-10-PDOC-0010)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Chemistry › Organic Chemistry › Organometallic Complex Synthesis and Catalysis
- Physical Sciences › Chemistry › Organic Chemistry › Asymmetric Synthesis and Catalysis
- Keywords
- yttrium catalyst, polyhydroxybutyrate, aliphatic polyesters, stereoselective ring-opening polymerization, DFT calculations, one-pot polymerization, biodegradable polymers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.