Nafion®-stabilised Pt/C electrocatalysts with efficient catalyst layer ionomer distribution for proton exchange membrane fuel cells
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
We report a facile method for the preparation of proton exchange membrane fuel cell (PEMFC) electrocatalysts from Nafion®-stabilised colloidal Pt nanoparticles (Nafion®-Pt/C), offering synthetically-directed formation of the Pt-ionomer interface and providing unprecedented control over the morphology of Pt particles on the carbon support. Electrochemical characterisation of the catalysts in aqueous acidic electrolytes using Rotating Disc Electrode (RDE) techniques revealed that Nafion®-Pt/C catalysts possessed similar specific activity and mass activity towards the oxygen reduction reaction (ORR) as commercial Pt/C catalysts, whilst requiring lower overall ionomer loadings. Combined with the near-100% utilisation measured for the Nafion®-Pt/C catalysts, this implies that Pt nanoparticles synthesised with Nafion® as a stabiliser can be ‘tuned’ to have simultaneous access to the reactant gas, the electron conducting carbon support and the proton conducting polymer electrolyte in the catalyst layer, thereby optimising the triple-phase reaction zone. By taking advantage of this bottom-up approach, which allows nanoscale control of the Nafion®–Pt–carbon interface, new opportunities exist to lower the Pt loading and the cost of the fuel cell.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanoalloys: From Theory to Applications of Alloy Clusters and Nanoparticles
Ferrando, R., Jellinek, J., & Johnston, R. L. (2008) · Chemical Reviews · doi:10.1021/cr040090g · Cited by 3,690
Characterization of High‐Surface‐Area Electrocatalysts Using a Rotating Disk Electrode Configuration
Schmidt, T. J., Gasteiger, H. A., Stäb, G. D., Urban, P. M., Kolb, D. M., & Behm, R. J. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838642 · Cited by 1,131
Cited by
Recent Advances in Electrocatalysts for Oxygen Reduction Reaction
Shao, M., Chang, Q., Dodelet, J.-P., & Chenitz, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00462 · Cited by 3,903
Shinozaki, K., Zack, J. W., Richards, R. M., Pivovar, B. S., & Kocha, S. S. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.1071509jes · Cited by 353
Shinozaki, K., Zack, J. W., Pylypenko, S., Pivovar, B. S., & Kocha, S. S. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0551512jes · Cited by 254
The importance of ultrasonic parameters in the preparation of fuel cell catalyst inks
Pollet, B. G., & Goh, J. T. E. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2013.09.160 · Cited by 117
Self-citationFouzaï, I., Gentil, S., Bassetto, V. C., Silva, W. O., Maher, R., & Girault, H. H. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta07470e · Cited by 102
Metadata
- Authors
- Curnick, O. J., Pollet, B. G., & Mendes, P. M.
- Venue
- RSC Advances
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 2
- Issue
- 22
- Pages
- 8368
- ISSN
- 2046-2069 (ISSN-L)
- OpenAlex
- W2035984104
- Cited by
- 54
- References
- 2
- FWCI
- 2.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.