The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
High strength films with gas-barrier fabricated from chitin solution dissolved at low temperature
Abstract
The fabrication of pure chitin materials remains a challenge due to the difficult dissolution and regeneration of chitin. It has been a stumbling block for chitin research and utilization. In this work, chitin was dissolved completely in 11 wt% NaOH–4 wt% urea aqueous solution via the freezing/thawing method without derivatization, as supported by 13C NMR spectra. The pure regenerated chitin films with high strength were successfully prepared from the transparent chitin solution by coagulating with ethanol or 45 wt% dimethylacetamide (DMAc) aqueous solution. The influences of the interactions between the chitin solution and coagulants on the structure and properties of the chitin films were investigated by UV, FT-IR spectra, scanning electron microscopy, X-ray diffraction, nitrogen adsorption isotherms, thermo-gravimetric analysis and tensile testing, indicating the good coagulating condition. The dissolution and regeneration of chitin was confirmed to be an entirely physical processes. The chitin films possessed homogeneous structure, high optical transmittance (87% at 800 nm), moderate thermal stability, as well as excellent tensile strength (up to 111 MPa). Moreover, these chitin films had good gas barrier properties (0.003 barrer for oxygen permeability), indicating great potentials in the materials field. This work would open up a completely new avenue with green technology to investigate the most intransigent chitin.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation
Fukuzumi, H., Saito, T., Iwata, T., Kumamoto, Y., & Isogai, A. (2009) · Biomacromolecules · doi:10.1021/bm801065u · Cited by 1,271
Main properties and current applications of some polysaccharides as biomaterials
Rinaudo, M. (2008) · Polymer International · doi:10.1002/pi.2378 · Cited by 1,028
Vegetable oil-based polymeric materials: synthesis, properties, and applications
Xia, Y., & Larock, R. C. (2010) · Green Chemistry · doi:10.1039/c0gc00264j · Cited by 864
Scott, G. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(99)00182-2 · Cited by 330
Liu, C., Liu, F., Cai, J., Xie, W., Long, T. E., Turner, S. R., Lyons, A., & Gross, R. A. (2011) · Biomacromolecules · doi:10.1021/bm2007554 · Cited by 128
Self-citation
Cited by
Recent advances in chitin based materials constructed via physical methods
Duan, B., Huang, Y., Lu, A., & Zhang, L. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.04.001 · Cited by 386
Self-citationAdvances in Functional Chitin Materials: A Review
Shamshina, J. L., Berton, P., & Rogers, R. D. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b06372 · Cited by 272
Hydrophobic Modification on Surface of Chitin Sponges for Highly Effective Separation of Oil
Duan, B., Gao, H., He, M., & Zhang, L. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am505414y · Cited by 266
Self-citationKhajavian, M., Vatanpour, V., Castro-Muñoz, R., & Boczkaj, G. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118702 · Cited by 264
Pohling, J., Hawboldt, K., & Dave, D. (2022) · Green Chemistry · doi:10.1039/d2gc01968j · Cited by 52
Metadata
- Authors
- Duan, B., Chang, C., Ding, B., Cai, J., Xu, M., Feng, S., Ren, J., Shi, X., Du, Y., & Zhang, L.
- Venue
- J. Mater. Chem. A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 5
- Pages
- 1867-1874
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2075012057
- Cited by
- 171
- References
- 5
- FWCI
- 3.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High strength films with gas-barrier fabricated from chitin solution dissolved at low temperature. https://app.cochat.ai/papers/10.1039/c2ta00068g
- The paper
- Duan, B., Chang, C., Ding, B., Cai, J., Xu, M., Feng, S., Ren, J., Shi, X., Du, Y., & Zhang, L. (2013). High strength films with gas-barrier fabricated from chitin solution dissolved at low temperature. J. Mater. Chem. A. https://doi.org/10.1039/c2ta00068g
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.