The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Synthesis and characterization of nitrogen-doped graphene hydrogels by hydrothermal route with urea as reducing-doping agents
Abstract
Nitrogen-doped graphene hydrogels (NGHs) were synthesized through a one-pot hydrothermal route with graphene oxide (GO) as raw material and urea as reducing-doping agents. The morphology, structure, and components of the NGHs were characterized by scanning electron microscopy, Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, methylene blue adsorption, thermogravimetric analysis and electrical conductivity measurements. The results demonstrated that nitrogen was doped into the graphene plane at the same time as the GO sheets were reduced, and the nitrogen content incorporated into the graphene lattice was in the range of 3.95 to 6.61 at.% with pyrrolic N as the main component. The NGHs contained about 97.6 wt% water and have a large specific surface area (SSA) of >1300 m2 g−1 in the wet state. In addition, the electrochemical performance of the NGHs was investigated. The sample NGHs-4 with a nitrogen content of 5.86 at.% and SSA of 1521 ± 60 m2 g−1 in the wet state showed excellent capacitive behavior (308 F g−1 at 3 A g−1) and superior cycling stability (92% retention after 1200 cycles) in 6 mol L−1 KOH. The experimental results indicated that not only the N-content but also the N-type have very significant impact on the capacitive behavior. Furthermore, NGHs strongly influenced the electrochemical properties because of their high SSAs and mesoporous structure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Principles and applications of electrochemical capacitors
Kötz, R., & Carlen, M. (2000) · Electrochimica Acta · doi:10.1016/s0013-4686(00)00354-6 · Cited by 4,804
Raman spectroscopy of carbon nanotubes
Dresselhaus, M. S., Dresselhaus, G., Saito, R., & Jorio, A. (2005) · Physics Reports · doi:10.1016/j.physrep.2004.10.006 · Cited by 4,499
Nitrogen-Doped Graphene as Efficient Metal-Free Electrocatalyst for Oxygen Reduction in Fuel Cells
Qu, L., Liu, Y., Baek, J.-B., & Dai, L. (2010) · ACS Nano · doi:10.1021/nn901850u · Cited by 3,948
Single Sheet Functionalized Graphene by Oxidation and Thermal Expansion of Graphite
McAllister, M. J., Li, J.-L., Adamson, D. H., Schniepp, H. C., Abdala, A. A., Liu, J., Herrera-Alonso, M., Milius, D. L., Car, R., Prud'homme, R. K., et al. (2007) · Chemistry of Materials · doi:10.1021/cm0630800 · Cited by 3,569
Kovtyukhova, N. I., Ollivier, P. J., Martin, B. R., Mallouk, T. E., Chizhik, S. A., Buzaneva, E. V., & Gorchinskiy, A. D. (1999) · Chemistry of Materials · doi:10.1021/cm981085u · Cited by 3,240
A route to high surface area, porosity and inclusion of large molecules in crystals
Materials Design and Discovery Group, Chae, H. K., Siberio-Pérez, D. Y., Kim, J., Go, Y., Eddaoudi, M., Matzger, A. J., O'Keeffe, M., & Yaghi, O. M. (2004) · Nature · doi:10.1038/nature02311 · Cited by 2,816
Sheng, Z.-H., Shao, L., Chen, J.-J., Bao, W.-J., Wang, F.-B., & Xia, X.-H. (2011) · ACS Nano · doi:10.1021/nn103584t · Cited by 2,573
Nitrogen-Doped Graphene and Its Application in Electrochemical Biosensing
Wang, Y., Shao, Y., Matson, D. W., Li, J., & Lin, Y. (2010) · ACS Nano · doi:10.1021/nn100315s · Cited by 2,155
N-Doping of Graphene Through Electrothermal Reactions with Ammonia
Wang, X., Li, X., Zhang, L., Yoon, Y., Weber, P. K., Wang, H., Guo, J., & Dai, H. (2009) · Science · doi:10.1126/science.1170335 · Cited by 2,152
Research works printed but not linked: 2
- Lee, 2009, Small, 5, 1769, 10.1002/smll.200801938 · doi:10.1002/smll.200801938
- Su, 2012, Acta Phys.-Chim. Sin., 28, 2745, 10.3866/PKU.WHXB201208221 · doi:10.3866/pku.whxb201208221
Cited by
Heteroatom-doped graphene materials: syntheses, properties and applications
Wang, X., Sun, G., Routh, P., Kim, D.-H., Huang, W., & Chen, P. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00141a · Cited by 1,891
Deng, Y., Xie, Y., Zou, K., & Ji, X. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08620e · Cited by 997
Porous Graphene Materials for Advanced Electrochemical Energy Storage and Conversion Devices
Han, S., Wu, D., Li, S., Zhang, F., & Feng, X. (2014) · Advanced Materials · doi:10.1002/adma.201303115 · Cited by 712
Hou, Y., Huang, T., Wen, Z., Mao, S., Cui, S., & Chen, J. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400337 · Cited by 563
Maiti, U. N., Lee, W. J., Lee, J. M., Oh, Y., Kim, J. Y., Kim, J. E., Shim, J., Han, T. H., & Kim, S. O. (2014) · Advanced Materials · doi:10.1002/adma.201303265 · Cited by 544
Wang, B., Al Abdulla, W., Wang, D., & Zhao, X. S. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03825h · Cited by 487
Synthesis, properties and applications of graphene doped with boron, nitrogen and other elements
Rao, C. N. R., Gopalakrishnan, K., & Govindaraj, A. (2014) · Nano Today · doi:10.1016/j.nantod.2014.04.010 · Cited by 450
Peng, H., Liu, F., Liu, X., Liao, S., You, C., Tian, X., Nan, H., Luo, F., Song, H., Fu, Z., et al. (2014) · ACS Catalysis · doi:10.1021/cs500744x · Cited by 429
Rao, C. N. R., Gopalakrishnan, K., & Maitra, U. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am509096x · Cited by 413
The Chemistry and Promising Applications of Graphene and Porous Graphene Materials
Huang, H., Shi, H., Das, P., Qin, J., Li, Y., Wang, X., Su, F., Wen, P., Li, S., Lu, P., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909035 · Cited by 388
Heteroatom-doped graphene-based materials for sustainable energy applications: A review
Lee, S. J., Theerthagiri, J., Nithyadharseni, P., Arunachalam, P., Balaji, D., Madan Kumar, A., Madhavan, J., Mittal, V., & Choi, M. Y. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110849 · Cited by 351
Sun, H., Wang, Y., Liu, S., Ge, L., Wang, L., Zhu, Z., & Wang, S. (2013) · Chemical Communications · doi:10.1039/c3cc43401j · Cited by 336
Functional Gels Based on Chemically Modified Graphenes
Li, C., & Shi, G. (2014) · Advanced Materials · doi:10.1002/adma.201306104 · Cited by 300
Synthesis, decoration and properties of three-dimensional graphene-based macrostructures: A review
Fang, Q., Shen, Y., & Chen, B. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.12.001 · Cited by 273
Zhang, Y., Chen, P., Gao, X., Wang, B., Liu, H., Wu, H., Liu, H., & Dou, S. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201603716 · Cited by 267
Recent advances in porous graphene materials for supercapacitor applications
Zhang, X., Zhang, H., Li, C., Wang, K., Sun, X., & Ma, Y. (2014) · RSC Adv. · doi:10.1039/c4ra07869a · Cited by 262
Hou, Y., Zhang, B., Wen, Z., Cui, S., Guo, X., He, Z., & Chen, J. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02254h · Cited by 221
Li, S., Yu, Z., Yang, Y., Liu, Y., Zou, H., Yang, H., Jin, J., & Ma, J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00961e · Cited by 50
Sarac Oztuna, F. E., Beyazay, T., & Unal, U. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b07460 · Cited by 34
Metadata
- Authors
- Guo, H.-L., Su, P., Kang, X., & Ning, S.-K.
- Venue
- J. Mater. Chem. A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 6
- Pages
- 2248-2255
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2110692366
- Cited by
- 407
- References
- 34
- FWCI
- 9.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.