The DOI matches its Crossref record; 68 of the 68 references it cites were found in a registry or an index.
LiMnPO4 – A next generation cathode material for lithium-ion batteries
Abstract
Development of an eco-friendly, low cost and high energy density (∼700 W h kg−1) LiMnPO4 cathode material became attractive due to its high operating voltage ∼4.1 V vs. Li falling within the electrochemical stability window of conventional electrolyte solutions and offers more safety features due to the presence of a strong P–O covalent bond. The vacancy formation energy for LiMnPO4 was 0.19 eV higher than that for LiFePO4, resulting in a 10−3 times-diluted complex concentration, which represents the main difference between the kinetics in the initial stage of charging of two olivine materials. This review highlights the overview of current research activities on LiMnPO4 cathodes in both native and substituted forms along with carbon coating synthesized by various synthetic techniques. Further, carbon coated LiMnPO4 was also prepared by a solid-state approach and the obtained results are compared with previous literature values. The challenges and the need for further research to realize the full performance of LiMnPO4 cathodes are described in detail.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Insertion Electrode Materials for Rechargeable Lithium Batteries
Winter, M., Besenhard, J. O., Spahr, M. E., & Novák, P. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199807)10:10<725::aid-adma725>3.0.co;2-z · Cited by 2,965
Electronically conductive phospho-olivines as lithium storage electrodes
Chung, S.-Y., Bloking, J. T., & Chiang, Y.-M. (2002) · Nature Materials · doi:10.1038/nmat732 · Cited by 2,939
Challenges Facing Lithium Batteries and Electrical Double‐Layer Capacitors
Choi, N., Chen, Z., Freunberger, S. A., Ji, X., Sun, Y., Amine, K., Yushin, G., Nazar, L. F., Cho, J., & Bruce, P. G. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201429 · Cited by 2,700
Lithium-ion batteries. A look into the future
Scrosati, B., Hassoun, J., & Sun, Y.-K. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01388b · Cited by 2,595
Thackeray, M. M., Wolverton, C., & Isaacs, E. D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21892e · Cited by 2,515
Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries
Thackeray, M. M., Kang, S.-H., Johnson, C. S., Vaughey, J. T., Benedek, R., & Hackney, S. A. (2007) · Journal of Materials Chemistry · doi:10.1039/b702425h · Cited by 2,039
Electrical Energy Storage and Intercalation Chemistry
Whittingham, M. S. (1976) · Science · doi:10.1126/science.192.4244.1126 · Cited by 1,919
Lithium insertion into manganese spinels
Thackeray, M. M., David, W. I. F., Bruce, P. G., & Goodenough, J. B. (1983) · Materials Research Bulletin · doi:10.1016/0025-5408(83)90138-1 · Cited by 1,778
A review of conduction phenomena in Li-ion batteries
Park, M., Zhang, X., Chung, M., Less, G. B., & Sastry, A. M. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.060 · Cited by 1,627
Development and challenges of LiFePO4cathode material for lithium-ion batteries
Yuan, L.-X., Wang, Z.-H., Zhang, W.-X., Hu, X.-L., Chen, J.-T., Huang, Y.-H., & Goodenough, J. B. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00029a · Cited by 1,301
Effect of Structure on the Fe3 + / Fe2 + Redox Couple in Iron Phosphates
Padhi, A. K., Nanjundaswamy, K. S., Masquelier, C., Okada, S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837649 · Cited by 1,295
Safety mechanisms in lithium-ion batteries
Balakrishnan, P. G., Ramesh, R., & Prem Kumar, T. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.002 · Cited by 1,132
Materials Challenges and Opportunities of Lithium Ion Batteries
Manthiram, A. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz1015422 · Cited by 1,065
Layered vanadium and molybdenum oxides: batteries and electrochromics
Chernova, N. A., Roppolo, M., Dillon, A. C., & Whittingham, M. S. (2009) · Journal of Materials Chemistry · doi:10.1039/b819629j · Cited by 874
History, Evolution, and Future Status of Energy Storage
Whittingham, M. S. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2012.2190170 · Cited by 873
Recent progress in cathode materials research for advanced lithium ion batteries
Xu, B., Qian, D., Wang, Z., & Meng, Y. S. (2012) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2012.05.003 · Cited by 834
Higher, Stronger, Better…︁ A Review of 5 Volt Cathode Materials for Advanced Lithium‐Ion Batteries
Kraytsberg, A., & Ein‐Eli, Y. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200068 · Cited by 698
Nanostructured electrode materials for electrochemical energy storage and conversion
Manthiram, A., Vadivel Murugan, A., Sarkar, A., & Muraliganth, T. (2008) · Energy & Environmental Science · doi:10.1039/b811802g · Cited by 638
Cathode materials modified by surface coating for lithium ion batteries
Li, C., Zhang, H. P., Fu, L. J., Liu, H., Wu, Y. P., Rahm, E., Holze, R., & Wu, H. Q. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2005.11.015 · Cited by 624
A reversible graphite-lithium negative electrode for electrochemical generators
Yazami, R., & Touzain, P. (1983) · Journal of Power Sources · doi:10.1016/0378-7753(83)87040-2 · Cited by 624
Delacourt, C., Laffont, L., Bouchet, R., Wurm, C., Leriche, J.-B., Morcrette, M., Tarascon, J.-M., & Masquelier, C. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1884787 · Cited by 619
Who will drive electric vehicles, olivine or spinel?
Park, O. K., Cho, Y., Lee, S., et al. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00559b · Cited by 617
Recent advances in the research of polyanion-type cathode materials for Li-ion batteries
Gong, Z., & Yang, Y. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00713g · Cited by 549
The existence of a temperature-driven solid solution in LixFePO4 for 0 ≤ x ≤ 1
Delacourt, C., Poizot, P., Tarascon, J.-M., & Masquelier, C. (2005) · Nature Materials · doi:10.1038/nmat1335 · Cited by 524
Battery Technologies for Large-Scale Stationary Energy Storage
Soloveichik, G. L. (2011) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-061010-114116 · Cited by 459
Lithium‐Ion Conducting Electrolyte Salts for Lithium Batteries
Aravindan, V., Gnanaraj, J., Madhavi, S., & Liu, H. (2011) · Chemistry – A European Journal · doi:10.1002/chem.201101486 · Cited by 452
Self-citationLithium insertion into Fe2(SO4)3 frameworks
Manthiram, A., & Goodenough, J. B. (1989) · Journal of Power Sources · doi:10.1016/0378-7753(89)80153-3 · Cited by 413
One-Step Low-Temperature Route for the Preparation of Electrochemically Active LiMnPO4 Powders
Delacourt, C., Poizot, P., Morcrette, M., Tarascon, J.-M., & Masquelier, C. (2004) · Chemistry of Materials · doi:10.1021/cm030347b · Cited by 406
High‐Performance Carbon‐LiMnPO4 Nanocomposite Cathode for Lithium Batteries
Oh, S., Oh, S., Yoon, C., Scrosati, B., Amine, K., & Sun, Y. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201000469 · Cited by 396
LiMnPO4 Nanoplate Grown via Solid-State Reaction in Molten Hydrocarbon for Li-Ion Battery Cathode
Choi, D., Wang, D., Bae, I.-T., Xiao, J., Nie, Z., Wang, W., Viswanathan, V. V., Lee, Y. J., Zhang, J.-G., Graff, G. L., et al. (2010) · Nano Letters · doi:10.1021/nl1007085 · Cited by 367
Self-citationPadhi, A. K., Nanjundaswamy, K. S., Masquelier, C., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837868 · Cited by 361
Devaraju, M. K., & Honma, I. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100642 · Cited by 349
LiMn1−xFexPO4 Nanorods Grown on Graphene Sheets for Ultrahigh‐Rate‐Performance Lithium Ion Batteries
Wang, H., Yang, Y., Liang, Y., Cui, L., Sanchez Casalongue, H., Li, Y., Hong, G., Cui, Y., & Dai, H. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201103163 · Cited by 324
Masquelier, C., Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1998) · Journal of Solid State Chemistry · doi:10.1006/jssc.1997.7629 · Cited by 315
Nanjundaswamy, K. (1996) · Solid State Ionics · doi:10.1016/s0167-2738(96)00472-9 · Cited by 314
LiMn0.8Fe0.2PO4: An Advanced Cathode Material for Rechargeable Lithium Batteries
Martha, S. K., Grinblat, J., Haik, O., Zinigrad, E., Drezen, T., Miners, J. H., Exnar, I., Kay, A., Markovsky, B., & Aurbach, D. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200903587 · Cited by 311
Lithium insertion into Fe2(MO4)3 frameworks: Comparison of M = W with M = Mo
Manthiram, A., & Goodenough, J. B. (1987) · Journal of Solid State Chemistry · doi:10.1016/0022-4596(87)90242-8 · Cited by 304
High-performance, nano-structured LiMnPO4 synthesized via a polyol method
Wang, D., Buqa, H., Crouzet, M., Deghenghi, G., Drézen, T., Exnar, I., Kwon, N.-H., Miners, J. H., Poletto, L., & Grätzel, M. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.09.077 · Cited by 303
Ong, S. P., Jain, A., Hautier, G., Kang, B., & Ceder, G. (2010) · Electrochemistry Communications · doi:10.1016/j.elecom.2010.01.010 · Cited by 282
Recent Progress in Nanostructured Cathode Materials for Lithium Secondary Batteries
Song, H., Lee, K. T., Kim, M. G., Nazar, L. F., & Cho, J. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201000231 · Cited by 278
Materials for Rechargeable Lithium-Ion Batteries
Hayner, C. M., Zhao, X., & Kung, H. H. (2012) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-062011-081024 · Cited by 263
Batteries for Electric and Hybrid-Electric Vehicles
Cairns, E. J., & Albertus, P. (2010) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-073009-100942 · Cited by 263
Myung, S.-T., Amine, K., & Sun, Y.-K. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00508h · Cited by 230
Cathode materials: A personal perspective
Goodenough, J. B. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.217 · Cited by 229
Muraliganth, T., & Manthiram, A. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp1055107 · Cited by 208
Besenhard, J. O., & Winter, M. (2002) · ChemPhysChem · Cited by 201
Sun, Y., Oh, S., Park, H., & Scrosati, B. (2011) · Advanced Materials · doi:10.1002/adma.201102497 · Cited by 200
Koltypin, M., Aurbach, D., Nazar, L., & Ellis, B. (2007) · Electrochemical and Solid-State Letters · doi:10.1149/1.2403974 · Cited by 189
Theoretical evaluation of high-energy lithium metal phosphate cathode materials in Li-ion batteries
Howard, W. F., & Spotnitz, R. M. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.12.046 · Cited by 185
Vadivel Murugan, A., Muraliganth, T., & Manthiram, A. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3028304 · Cited by 168
Thermal instability of Olivine-type LiMnPO4 cathodes
Chen, G., & Richardson, T. J. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.08.046 · Cited by 143
Unsupported claims of ultrafast charging of LiFePO4 Li-ion batteries
Zaghib, K., Goodenough, J. B., Mauger, A., et al. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.05.043 · Cited by 143
A short review on surface chemical aspects of Li batteries: A key for a good performance
Martha, S. K., Markevich, E., Burgel, V., Salitra, G., Zinigrad, E., Markovsky, B., Sclar, H., Pramovich, Z., Heik, O., Aurbach, D., et al. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.09.084 · Cited by 136
Oh, S., Myung, S., Park, J. B., Scrosati, B., Amine, K., & Sun, Y. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201107394 · Cited by 125
Improving the Electrochemical Activity of LiMnPO[sub 4] Via Mn-Site Substitution
Wang, D., Ouyang, C., Drézen, T., Exnar, I., Kay, A., Kwon, N.-H., Gouérec, P., Miners, J. H., Wang, M., & Grätzel, M. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3271112 · Cited by 118
Oh, S., Jung, H., Yoon, C. S., Myung, S., Chen, Z., Amine, K., & Sun, Y. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.159 · Cited by 110
Improving the Performance of Lithium Manganese Phosphate Through Divalent Cation Substitution
Chen, G., Wilcox, J. D., & Richardson, T. J. (2008) · Electrochemical and Solid-State Letters · doi:10.1149/1.2971169 · Cited by 108
Carbon Coated LiMnPO[sub 4] Nanorods for Lithium Batteries
Kumar, P. R., Venkateswarlu, M., Misra, M., Mohanty, A. K., & Satyanarayana, N. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3527059 · Cited by 84
Doan, T. N. L., Bakenov, Z., & Taniguchi, I. (2010) · Advanced Powder Technology · doi:10.1016/j.apt.2009.10.016 · Cited by 80
Barpanda, P., Djellab, K., Recham, N., Armand, M. B., & Tarascon, J. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04423g · Cited by 77
Effect of copper doping on LiMnPO4 prepared via hydrothermal route
Ni, J., & Gao, L. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.03.073 · Cited by 76
Cited by
Research Progress on Negative Electrodes for Practical Li‐Ion Batteries: Beyond Carbonaceous Anodes
Aravindan, V., Lee, Y., & Madhavi, S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402225 · Cited by 462
Self-citationNa3MnZr(PO4)3: A High-Voltage Cathode for Sodium Batteries
Gao, H., Seymour, I. D., Xin, S., Xue, L., Henkelman, G., & Goodenough, J. B. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b11388 · Cited by 312
Jian, Z., Han, W., Liang, Y., Lan, Y., Fang, Z., Hu, Y.-S., & Yao, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta04630g · Cited by 49
Wotango, A. S., Su, W.-N., Haregewoin, A. M., Chen, H.-M., Cheng, J.-H., Lin, M.-H., Wang, C.-H., & Hwang, B. J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02185 · Cited by 38
Li, M., Zuo, Z., Deng, J., Yao, Q., Wang, Z., Zhou, H., & Rao, G. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2302-8 · Cited by 5
Metadata
- Authors
- Aravindan, V., Gnanaraj, J., Lee, Y.-S., & Madhavi, S.
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 11
- Pages
- 3518
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2091737449
- Cited by
- 466
- References
- 68
- FWCI
- 29.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.