The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Understanding the effect of surface/bulk defects on the photocatalytic activity of TiO2: anatase versus rutile
Abstract
The sole effect of surface/bulk defects of TiO2 samples on their photocatalytic activity was investigated. Nano-sized anatase and rutile TiO2 were prepared by hydrothermal method and their surface/bulk defects were adjusted simply by calcination at different temperatures, i.e. 400-700 °C. High temperature calcinations induced the growth of crystalline sizes and a decrease in the surface areas, while the crystalline phase and the exposed facets were kept unchanged during calcination, as indicated by the characterization results from XRD, Raman, nitrogen adsorption-desorption, TEM and UV-Vis spectra. The existence of surface/bulk defects in calcined TiO2 samples was confirmed by photoluminescence and XPS spectra, and the surface/bulk defect ratio was quantitatively analyzed according to positron annihilation results. The photocatalytic activity of calcined TiO2 samples was evaluated in the photocatalytic reforming of methanol and the photocatalytic oxidation of α-phenethyl alcohol. Based on the characterization and catalytic results, a direct correlation between the surface specific photocatalytic activity and the surface/bulk defect density ratio could be drawn for both anatase TiO2 and rutile TiO2. The surface defects of TiO2, i.e. oxygen vacancy clusters, could promote the separation of electron-hole pairs under irradiation, and therefore, enhance the activity during photocatalytic reaction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrochemical Photolysis of Water at a Semiconductor Electrode
FUJISHIMA, A., & HONDA, K. (1972) · Nature · doi:10.1038/238037a0 · Cited by 34,169
Photocatalysis on TiO2 Surfaces: Principles, Mechanisms, and Selected Results
Linsebigler, A. L., Lu, G., & Yates, J. T. (1995) · Chemical Reviews · doi:10.1021/cr00035a013 · Cited by 11,575
Heterogeneous photocatalyst materials for water splitting
Kudo, A., & Miseki, Y. (2009) · Chem. Soc. Rev. · doi:10.1039/b800489g · Cited by 10,585
TiO2 photocatalysis and related surface phenomena
FUJISHIMA, A., ZHANG, X., & TRYK, D. (2008) · Surface Science Reports · doi:10.1016/j.surfrep.2008.10.001 · Cited by 6,737
Recent developments in photocatalytic water treatment technology: A review
Chong, M. N., Jin, B., Chow, C. W. K., & Saint, C. (2010) · Water Research · doi:10.1016/j.watres.2010.02.039 · Cited by 5,386
Photoinduced reactivity of titanium dioxide
CARP, O. (2004) · Progress in Solid State Chemistry · doi:10.1016/j.progsolidstchem.2004.08.001 · Cited by 4,566
Anatase TiO2 single crystals with a large percentage of reactive facets
Yang, H. G., Sun, C. H., Qiao, S. Z., Zou, J., Liu, G., Smith, S. C., Cheng, H. M., & Lu, G. Q. (2008) · Nature · doi:10.1038/nature06964 · Cited by 4,116
Nano‐photocatalytic Materials: Possibilities and Challenges
Tong, H., Ouyang, S., Bi, Y., Umezawa, N., Oshikiri, M., & Ye, J. (2012) · Advanced Materials · doi:10.1002/adma.201102752 · Cited by 3,827
Review of the anatase to rutile phase transformation
Hanaor, D. A. H., & Sorrell, C. C. (2011) · Journal of Materials Science · doi:10.1007/s10853-010-5113-0 · Cited by 3,394
The surface science of metal oxides
(1995) · Materials Characterization · doi:10.1016/1044-5803(95)80013-1 · Cited by 2,372
Cited by
Defect engineering in photocatalytic materials
Bai, S., Zhang, N., Gao, C., & Xiong, Y. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.08.058 · Cited by 1,236
Bai, S., Jiang, J., Zhang, Q., & Xiong, Y. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00064e · Cited by 1,185
Li, L., Yan, J., Wang, T., Zhao, Z.-J., Zhang, J., Gong, J., & Guan, N. (2015) · Nature Communications · doi:10.1038/ncomms6881 · Cited by 847
Self-citationWang, S., Pan, L., Song, J.-J., Mi, W., Zou, J.-J., Wang, L., & Zhang, X. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512047k · Cited by 718
Titanium Dioxide Nanomaterials: Self-Structural Modifications
Liu, L., & Chen, X. (2014) · Chemical Reviews · doi:10.1021/cr400624r · Cited by 509
Atomic‐Level Charge Separation Strategies in Semiconductor‐Based Photocatalysts
Chen, F., Ma, T., Zhang, T., Zhang, Y., & Huang, H. (2021) · Advanced Materials · doi:10.1002/adma.202005256 · Cited by 505
Wang, J., Li, J., Jiang, C., Zhou, P., Zhang, P., & Yu, J. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.11.036 · Cited by 485
Yan, J., Wu, H., Chen, H., Zhang, Y., Zhang, F., & Liu, S. F. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.03.026 · Cited by 406
Self-citationYu, X., Kim, B., & Kim, Y. K. (2013) · ACS Catalysis · doi:10.1021/cs4005776 · Cited by 387
A review of metal oxide-based Z-scheme heterojunction photocatalysts: actualities and developments
Yuan, Y., Guo, R.-T., Hong, L.-F., Ji, X.-Y., Lin, Z.-D., Li, Z.-S., & Pan, W.-G. (2021) · Materials Today Energy · doi:10.1016/j.mtener.2021.100829 · Cited by 372
Self-citationBai, S., Wang, L., Chen, X., Du, J., & Xiong, Y. (2015) · Nano Research · doi:10.1007/s12274-014-0606-9 · Cited by 356
Transition-metal-oxide-based catalysts for the oxygen reduction reaction
Wang, Y., Li, J., & Wei, Z. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta01321g · Cited by 351
Insight into the Effect of Oxygen Vacancy Concentration on the Catalytic Performance of MnO2
Li, L., Feng, X., Nie, Y., Chen, S., Shi, F., Xiong, K., Ding, W., Qi, X., Hu, J., Wei, Z., et al. (2015) · ACS Catalysis · doi:10.1021/acscatal.5b00320 · Cited by 348
Self-citationZhang, Y., Afzal, N., Pan, L., Zhang, X., & Zou, J. (2019) · Advanced Science · doi:10.1002/advs.201900053 · Cited by 344
Black TiO2: A review of its properties and conflicting trends
Rajaraman, T. S., Parikh, S. P., & Gandhi, V. G. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123918 · Cited by 323
Defect engineering in photocatalysis: formation, chemistry, optoelectronics, and interface studies
Maarisetty, D., & Baral, S. S. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta04297h · Cited by 314
Kong, L., Ji, Y., Dang, Z., Yan, J., Li, P., Li, Y., & Liu, S. (. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800668 · Cited by 306
Self-citationJu, P., Wang, P., Li, B., Fan, H., Ai, S., Zhang, D., & Wang, Y. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.10.001 · Cited by 299
Zafar, Z., Yi, S., Li, J., Li, C., Zhu, Y., Zada, A., Yao, W., Liu, Z., & Yue, X. (2022) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12171 · Cited by 284
Nb2O5/TiO2 heterojunctions: Synthesis strategy and photocatalytic activity
Yan, J., Wu, G., Guan, N., & Li, L. (2014) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.01.049 · Cited by 264
Self-citationToe, C. Y., Tsounis, C., Zhang, J., Masood, H., Gunawan, D., Scott, J., & Amal, R. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03116j · Cited by 262
Photocatalytic performance of Fe-doped TiO2nanoparticles under visible-light irradiation
Ali, T., Tripathi, P., Azam, A., Raza, W., Ahmed, A. S., Ahmed, A., & Muneer, M. (2017) · Materials Research Express · doi:10.1088/2053-1591/aa576d · Cited by 254
Feng, X., Wang, P., Hou, J., Qian, J., Ao, Y., & Wang, C. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2018.03.013 · Cited by 253
Fiorenza, R., Bellardita, M., Scirè, S., & Palmisano, L. (2018) · Molecular Catalysis · doi:10.1016/j.mcat.2018.06.002 · Cited by 47
Metadata
- Authors
- Yan, J., Wu, G., Guan, N., Li, L., Li, Z., & Cao, X.
- Venue
- Physical Chemistry Chemical Physics
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 15
- Issue
- 26
- Pages
- 10978
- ISSN
- 1463-9076 (ISSN-L)
- 1463-9084
- OpenAlex
- W1988337077
- Cited by
- 684
- References
- 48
- FWCI
- 17.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.