Solvent extraction: the coordination chemistry behind extractive metallurgy
Open accessThe DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index; none of the 57 sources its claims cite is checked for support yet.
Abstract
The modes of action of the commercial solvent extractants used in extractive hydrometallurgy are classified according to whether the recovery process involves the transport of metal cations, M(n+), metalate anions, MXx(n-), or metal salts, MXx into a water-immiscible solvent. Well-established principles of coordination chemistry provide an explanation for the remarkable strengths and selectivities shown by most of these extractants. Reagents which achieve high selectivity when transporting metal cations or metal salts into a water-immiscible solvent usually operate in the inner coordination sphere of the metal and provide donor atom types or dispositions which favour the formation of particularly stable neutral complexes that have high solubility in the hydrocarbons commonly used in recovery processes. In the extraction of metalates, the structures of the neutral assemblies formed in the water-immiscible phase are usually not well defined and the cationic reagents can be assumed to operate in the outer coordination spheres. The formation of secondary bonds in the outer sphere using, for example, electrostatic or H-bonding interactions are favoured by the low polarity of the water-immiscible solvents.
Overview
CoChat Summary
TL;DR
This tutorial review classifies commercial solvent extractants used in extractive hydrometallurgy by whether they transport metal cations, metalate anions, or metal salts into a water-immiscible solvent, and explains their strength and selectivity through inner- and outer-sphere coordination chemistry. It argues that understanding these coordination modes can guide the design of more efficient and sustainable metal-refining reagents.
Key findings
- Extractants are grouped into metal cation, metalate anion, and metal salt extractants; inner-sphere donor design controls cation and salt extraction, while metalate extraction relies on outer-sphere/ion-pair assemblies and is limited by the Hofmeister bias.
- Phenolic oximes used extensively in copper recovery account for ca. 25% of world production; Acorga P50 has pH1/2 < 1.0, and its pseudo-macrocyclic Cu(II) complex contributes to selectivity over Ni(II) and Zn(II).
- Phosphorus(V) acid extractants form stable dimers and often 4:1 ligand:metal complexes [M(L)2(LH)2]; their first-row M2+ extraction sequence is Zn > Cu > Mn > Co > Ni, not the Irving–Williams order, and D2EHPA is used in a 150,000 tonne p.a. zinc plant.
- A LIX63/Versatic 10 blend recovers Ni at a pH1/2 more than two units lower than either reagent alone; the ditopic reagent HNT gave 98% Ni recovery in a circuit with two extraction and one stripping stage, but commercial use failed because imine linkages hydrolyse under acidic stripping and selectivity for sulfate over chloride was insufficient.
Methods
- Tutorial review of the coordination chemistry underpinning commercial solvent extraction in extractive hydrometallurgy, focusing on examples where structures of assemblies formed in the water-immiscible phase are best defined.
- Draws on literature, commercial reagent formulations, pH-loading curves, distribution ratios, and X-ray crystal structures of model complexes; no primary experimental dataset is reported.
- Organised by extractant class: metal cation extractants (oximes, phosphorus(V) acids, carboxylic acids, hydroxamic acids, 8-hydroxyquinolines, β-diketones), metalate anion extractants, metal salt extractants, and synergistic systems.
Limitations
- The authors state that structures of neutral assemblies in commercial metalate extraction are usually not well defined, the origin of synergism in extractant blends is generally not well defined, and determining interfacial assemblies is challenging with ambiguity in the bulk water-immiscible phase.
- The authors note that their three-type classification is convenient but does not preclude extractants functioning in more than one role and does not deal with synergistic mixtures.
- Evident from the text: as a tutorial review, it synthesises selected well-understood examples rather than systematically assessing all commercial reagents, and it reports no new experimental data or quantitative meta-analysis.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures













![Fig. 7 The structure of [Ni(Ph2PO2)2(Ph2PO2H)2(DMF)2] from single crystal X-ray diffraction. 21](https://figures.cochat.ai/paper-figures/02dc7d3df7e34cb0bf7859cf3d7ed754/solvent-extraction-the-coordination-chemistry-behind-extractive-metallurgy-figure-7.png)




![Fig. 11 Loadings of [ZnCl4] 2 (blue lines) and [FeCl4] 2 (red lines) by TEHA and a closely related monoamido derivative (L1) as a function of chloride concentration in the aqueous feed.](https://figures.cochat.ai/paper-figures/6e4daaf3df684c08ad5c3b4df2543331/solvent-extraction-the-coordination-chemistry-behind-extractive-metallurgy-figure-11.png)
![Fig. 12 The structure of [UO2(NO3)2(iso-TBP)2] from single crystal X-ray diffraction. 39](https://figures.cochat.ai/paper-figures/88a2be3d04c24e11b920385e2520e7d2/solvent-extraction-the-coordination-chemistry-behind-extractive-metallurgy-figure-12.png)
![Fig. 13 Uptake of NiSO4 by HNT to give a neutral complex [Ni(HNT)SO4] containing a zwitterionic form of the ligand.](https://figures.cochat.ai/paper-figures/3826daaf4d2a49e9a8d2cf59ab39e6e3/solvent-extraction-the-coordination-chemistry-behind-extractive-metallurgy-figure-13.png)



Verification
Claims the paper makes
0 Valid · 14 Not valid · 54 Not checked · 70 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“It is clear from the S-curve plots shown in Fig. 4 that Acorga P50 will reject Ni(II) and Zn(II) when Cu(II)”
§ Solvent extraction: the coordination chemistry behind extractive metallurgy † > Oxime extractants
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“In contrast, the monoamido derivative L1 in Fig. 11 is a much stronger extractant for Zn(II), requiring a lower concentration of chloride to effect 100% recovery of Zn(II) compared to Fe(III).”
§ Solvent extraction: the coordination chemistry behind extractive metallurgy † > Metalate anion extraction
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Also, the reagent is not sufficiently selective for sulfate over chloride to generate an NiSO 4 electrolyte of the purity required to operate a conventional sulfate electrowinning plant for nickel.40”
§ Solvent extraction: the coordination chemistry behind extractive metallurgy † > Scheme 4
What the sources say
- Not checked — no full text of the sourcecites [40] 40. J. H. Burns, G. M. Brown and R. R. Ryan, Acta Crystallogr., Sect. C: Cryst. Struct. Commun., 1985, 41, 1446-1448. source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Nickel can be stripped almost quantitatively by contacting the loaded organic phase with dilute sulfuric acid giving a 98% recovery in a circuit comprising two extraction and one stripping stage.40”
§ Solvent extraction: the coordination chemistry behind extractive metallurgy † > Scheme 4
What the sources say
- Not checked — no full text of the sourcecites [40] 40. J. H. Burns, G. M. Brown and R. R. Ryan, Acta Crystallogr., Sect. C: Cryst. Struct. Commun., 1985, 41, 1446-1448. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Commercial exploitation of this reagent for the recovery of nickel from pressure leaching of lateritic ores failed because the imine linkages are sensitive to hydrolysis under the acidic conditions preferred for stripping.”
§ Solvent extraction: the coordination chemistry behind extractive metallurgy † > Scheme 4
What the sources say
- Not checked — no full text of the sourcecites [40] 40. J. H. Burns, G. M. Brown and R. R. Ryan, Acta Crystallogr., Sect. C: Cryst. Struct. Commun., 1985, 41, 1446-1448. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
63 more claims
Create a free account to see all 138 claims and to verify the 2 references still open.
- It may state two separate claims as one. 53
- Probably not a substantial claim. 28
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Solvent extraction: the coordination chemistry behind extractive metallurgy † > Conclusions
“Figure: 11 Fig. 11 Fig. 11 Loadings of [ZnCl 4 ] 2À (blue lines) and [FeCl 4 ] 2À (red lines) by TEHA and a closely related monoamido derivative (L1) as a function of chloride concentration in the aqueous feed.”
§ Solvent extraction: the coordination chemistry behind extractive metallurgy † > Metalate anion extraction
“For example, tris-2-ethylhexylamine (TEHA) is a model for the trialkylamine reagents Alamine 330 etc., and shows the expected selectivity for FeCl 4 À over ZnCl 4 2À (Fig. 11).”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Solvent extraction: the coordination chemistry behind extractive metallurgy † > Conclusions
“Indeed, when the extractants transport metalate anions, MY x nÀ , the inner coordination sphere usually remains unchanged and it is only variations in the effectiveness of the secondary bonding which can give rise to selectivity and strength of recovery.”
§ Solvent extraction: the coordination chemistry behind extractive metallurgy † > Metalate anion extraction
“However, the relative stability of the metalates formed initially in the aqueous phase does contribute to the distribution coefficients for extraction.This is exploited to great effect in the separation of Co(II) from Ni(II) in the Outokumpu process.33”
Citations
Cites
Tylecote, R. F. (1977) · British Corrosion Journal · doi:10.1179/bcj.1977.12.3.137 · Cited by 386
U.S. Department of Energy Critical Materials Strategy
Bauer, D., Diamond, D., Li, J., Sandalow, D., Telleen, P., & Wanner, B. (2010) · doi:10.2172/1000846 · Cited by 301
Paiva, A. P., & Malik, P. (2004) · Journal of Radioanalytical and Nuclear Chemistry · doi:10.1023/b:jrnc.0000034890.23325.b5 · Cited by 290
Recovery of gallium from Bayer liquor: A review
Zhao, Z., Yang, Y., Xiao, Y., & Fan, Y. (2012) · Hydrometallurgy · doi:10.1016/j.hydromet.2012.06.002 · Cited by 225
A short history of hydrometallurgy
Habashi, F. (2005) · Hydrometallurgy · doi:10.1016/j.hydromet.2004.01.008 · Cited by 216
Cheng, C. Y. (2006) · Hydrometallurgy · doi:10.1016/j.hydromet.2006.05.002 · Cited by 168
Archaeometallurgy: The Study of Preindustrial Mining and Metallurgy
Killick, D. J., & Fenn, T. R. (2012) · Annual Review of Anthropology · doi:10.1146/annurev-anthro-092611-145719 · Cited by 147
Solvent extraction in southern Africa: An update of some recent hydrometallurgical developments
Sole, K. C., Feather, A. M., & Cole, P. M. (2005) · Hydrometallurgy · doi:10.1016/j.hydromet.2004.11.012 · Cited by 118
Solvent extraction in hydrometallurgy: Present and future
Ritcey, G. M. (2006) · Tsinghua Science and Technology · doi:10.1016/s1007-0214(06)70168-7 · Cited by 111
Solvent Extraction and Liquid Membranes
(2008) · doi:10.1201/9781420014112 · Cited by 110
Research works printed but not linked: 11
- Gramatyka, 2007, J. Achiev. Mater. Manuf. Eng., 20, 535
- J. Rankin , 4th High Temperature Processing Symposium, Swinburne University of Technology, Melborne, Australia, 2012
- Comprehensive Coordination Chemistry II, ed. P. A. Tasker, P. G. Plieger and L. C. West, Elsevier Ltd, Oxford, 2004
- G. A. Kordosky , 18th International Solvent Extraction Conference, Cape Town, South Africa, 2002
- S. F. Woollam and R. A.Grant, Solvent Extr.: Fundam. Ind. Appl., Proc. ISEC 2008, Int. Solvent Extr. Conf., Tuscon, Arizona, USA, 2008
- Kordosky, 1981, Miner. Eng., 33, 291
- V. Cocalia , T.Bednarski, D. J.Harris, H.Yáñez, A.Soto, M.Soderstrom and E.Kamenetzky, 19th International Solvent Extraction Conference, Santiago, Chile, 2011
- G. A. Kordosky , M. J.Virnig and P.Mattison, 18th International Solvent Extraction Conference, Cape Town, South Africa, 2002
- Moyer, 2005, Kem. Ind., 54, 65
- Reddy, 2012, Int. J. Res. Chem. Environ., 2, 158
- Huang, 2008, Guangpuxue Yu Guangpu Fenxi, 28, 2038
Cited by
Items 101–200 of 561
Majumder, D., Fajal, S., Shirolkar, M. M., T., A. T. A., Banyla, Y., Biswas, K., Rasaily, S., & Ghosh, S. K. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202419830 · Cited by 43
Xu, Z., Zhu, Z., Li, N., Tian, Y., & Jiang, L. (2018) · ACS Nano · doi:10.1021/acsnano.8b04328 · Cited by 39
Solvometallurgical process for the recovery of rare-earth elements from Nd–Fe–B magnets
Orefice, M., & Binnemans, K. (2020) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.117800 · Cited by 38
Electrostatics-driven shape transitions in soft shells
Jadhao, V., Thomas, C. K., & de la Cruz, M. O. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1413986111 · Cited by 41
Spathariotis, S., Peeters, N., Ryder, K. S., Abbott, A. P., Binnemans, K., & Riaño, S. (2020) · RSC Advances · doi:10.1039/d0ra06091g · Cited by 41
Proton Chelating Ligands Drive Improved Chemical Separations for Rhodium
Narita, H., Nicolson, R. M., Motokawa, R., Ito, F., Morisaku, K., Goto, M., Tanaka, M., Heller, W. T., Shiwaku, H., Yaita, T., et al. (2019) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.9b01136 · Cited by 37
Self-citationMulticomponent Model for the Prediction of Nuclear Waste/Rare-Earth Extraction Processes
Špadina, M., Bohinc, K., Zemb, T. N., & Dufrêche, J. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b01759 · Cited by 37
Lommelen, R., Onghena, B., & Binnemans, K. (2020) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.0c01821 · Cited by 46
The Contrasting Character of Early and Late Transition Metal Fluorides as Hydrogen Bond Acceptors
Smith, D. A., Beweries, T., Blasius, C. K., Jasim, N. A., Nazir, R., Nazir, S., Robertson, C. C., Whitwood, A. C., Hunter, C. A., Brammer, L., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b07509 · Cited by 34
Developments in supported liquid membranes for treatment of metal-bearing wastewater
Su, G. S., Morad, N., Ismail, N., & Rafatullah, M. (2020) · Separation and Purification Reviews · doi:10.1080/15422119.2020.1828100 · Cited by 34
Solvent extraction in non-ideal eutectic solvents – Application towards lanthanide separation
Favero, U. G., Schaeffer, N., Passos, H., Cruz, K. A. M. L., Ananias, D., Dourdain, S., & Hespanhol, M. C. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.123592 · Cited by 32
Špadina, M., & Bohinc, K. (2020) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2020.03.011 · Cited by 32
Grymonprez, B., Lommelen, R., Bussé, J., Binnemans, K., & Riaño, S. (2023) · Separation and Purification Technology · doi:10.1016/j.seppur.2023.125846 · Cited by 38
A Simple Primary Amide for the Selective Recovery of Gold from Secondary Resources
Doidge, E. D., Carson, I., Tasker, P. A., Ellis, R. J., Morrison, C. A., & Love, J. B. (2016) · Angewandte Chemie · doi:10.1002/ange.201606113 · Cited by 32
Self-citationEffect of polar molecular organic solvents on non-aqueous solvent extraction of rare-earth elements
Dewulf, B., Cool, V., Li, Z., & Binnemans, K. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121197 · Cited by 33
Ellis, R. J. (2016) · Inorganica Chimica Acta · doi:10.1016/j.ica.2016.08.008 · Cited by 28
A microfluidic study of synergic liquid–liquid extraction of rare earth elements
Maangar, A. E., Theisen, J., Penisson, C., Zemb, T. N., & Gabriel, J. P. (2020) · Physical Chemistry Chemical Physics · doi:10.1039/c9cp06569e · Cited by 33
Practical Applications of Supramolecular Extraction with Macrocycles
Li, A., Zhai, H., Li, J., & He, Q. G. (2020) · Chemistry Letters · doi:10.1246/cl.200409 · Cited by 35
Keshavarz, F., Kavun, V., van der Veen, M. A., Repo, E., & Barbiellini, B. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.135905 · Cited by 31
Huang, K., Liu, J., Wu, H., & Liu, H. (2015) · AIChE Journal · doi:10.1002/aic.14904 · Cited by 30
Bühl, M., Ashbrook, S. E., Dawson, D. M., Doyle, R. A., Hrobárik, P., Kaupp, M., & Smellie, I. A. (2016) · Chemistry - A European Journal · doi:10.1002/chem.201602567 · Cited by 31
Modification of Mg-Fe hydrotalcite using Cyanex 272 for lanthanides separation
Gasser, M. S., Sherif, E. E., & Rahman, R. O. A. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.01.129 · Cited by 29
Deng, S., Xiao, Z., Zhang, W., Noble, A., Das, S., Yih, Y., & Sutherland, J. W. (2022) · SSRN Electronic Journal · doi:10.1016/j.resconrec.2022.106810 · Cited by 34
Probing the existence of uranyl trisulfate structures in the AMEX solvent extraction process
Sukhbaatar, T., Duvail, M., Dumas, T., Dourdain, S., Arrachart, G., Solari, P. L., Guilbaud, P., & Pellet‐Rostaing, S. (2019) · Chemical Communications · doi:10.1039/c9cc02651g · Cited by 29
Catalytic epoxidation by perrhenate through the formation of organic-phase supramolecular ion pairs
Cokoja, M., Markovits, I. I. E., Anthofer, M. H., Poplata, S., Pöthig, A., Morris, D. S., Tasker, P. A., Herrmann, W. A., Kühn, F. E., & Love, J. B. (2015) · Chemical Communications · doi:10.1039/c4cc10235e · Cited by 27
Self-citationRedox-neutral conversion of ubiquitous PV sources to a versatile PO2+ phosphorylation reagent
Schneider, T., Schwedtmann, K., Fidelius, J., & Weigand, J. J. (2023) · Nature Synthesis · doi:10.1038/s44160-023-00344-0 · Cited by 27
Mechanistic study of hafnium and zirconium extraction with organophosphorus extractants
Vermaak, V., Krieg, H. M., de Beer, L., & van der Westhuizen, D. (2018) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299.2018.1431078 · Cited by 28
Gras, M., Duclos, L., Schaeffer, N., Mogilireddy, V., Švecová, L., Chaînet, E., Billard, I., & Papaïconomou, N. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c04263 · Cited by 30
Sun, Q., Yang, L., Huang, S., Zheng, X., Li, Y., & Wang, W. (2019) · Minerals Engineering · doi:10.1016/j.mineng.2018.11.049 · Cited by 27
da Silva, F. N., Bassaco, M. M., Bertuol, D. A., & Tanabe, E. H. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.11.098 · Cited by 28
Role of extractants and diluents in recovery of rare earths from waste materials
Pradhan, S., Swain, N., Prusty, S., Sahu, R. K., & Mishra, S. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.01.288 · Cited by 26
Mitigating Cerium Migration for Perfluorosulfonic Acid Membranes Using Organic Ligands
Agarwal, T., Matanović, I., Adhikari, S., Park, E. J., Babu, S. K., Kim, Y. S., Tian, D., Bae, C., Morales‐Collazo, O., Brennecke, J. F., et al. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.232320 · Cited by 25
Examining the potential of type V DESs for the solvent extraction of metal ions
Schaeffer, N., Vaz, I. C. M., Pinheiro, M. S., Olea, F., Hanada, T., Dourdain, S., & Coutinho, J. A. P. (2025) · Green Chemistry · doi:10.1039/d5gc00489f · Cited by 30
Narita, H., Kasuya, R., Suzuki, T., Motokawa, R., & Tanaka, M. (2020) · Wiley eBooks · doi:10.1002/9781119951438.eibc2756 · Cited by 28
Feng, T., Tan, J., Deng, W.-S., & Su, Y. (2017) · Chemical Engineering Science · doi:10.1016/j.ces.2017.11.029 · Cited by 24
Liquid–Liquid Phase Separation of Two Non-Dissolving Liquids—A Mini Review
Dimitrijević, D., Bösenhofer, M., & Harasek, M. (2023) · Processes · doi:10.3390/pr11041145 · Cited by 27
Ghosh, A. B., Datta, D., Uslu, H., Bamufleh, H. S., & Kumar, S. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.03.007 · Cited by 23
Ion-specific clustering of metal–amphiphile complexes in rare earth separations
Nayak, S., Lovering, K. A., & Uysal, A. (2020) · Nanoscale · doi:10.1039/d0nr04231e · Cited by 26
Quantum chemistry benchmarking of binding and selectivity for lanthanide extractants
Vo, M. N., Bryantsev, V. S., Johnson, J. K., & Keith, J. A. (2017) · International Journal of Quantum Chemistry · doi:10.1002/qua.25516 · Cited by 24
Rey, J., Atak, S., Dourdain, S., Arrachart, G., Berthon, L., & Pellet‐Rostaing, S. (2017) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299.2017.1362852 · Cited by 21
Okamura, H., Mizuno, M., Hirayama, N., Shimojo, K., Naganawa, H., & Imura, H. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b04998 · Cited by 21
Zhang, X., Razanajatovo, R. M., Du, X., Wang, S., Li, F., Wan, S., Chen, N., & Zhang, Q. (2023) · Eco-Environment & Health · doi:10.1016/j.eehl.2023.09.003 · Cited by 22
Green chemistry for precious metals recovery from WEEE
Serpe, A. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-102057-9.00011-1 · Cited by 21
On the Extraction of HCl and H 2 PtCl 6 by Tributyl Phosphate: A Mode of Action Study
MacRuary, K. J., Gordon, R. J., Grant, R. A., Woollam, S., Ellis, R. J., Tasker, P. A., Love, J. B., & Morrison, C. A. (2017) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299.2017.1379724 · Cited by 21
Self-citationExtraction of Cu(II) ions from aqueous solutions by free fatty acid-rich oils as green extractants
Halim, S. F. A., Chang, S. H., & Morad, N. (2019) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2019.100997 · Cited by 21
Premadasa, U. I., Bocharova, V., Lin, L., Genix, A.-C., Heller, W. T., Sacci, R. L., Ma, Y., Thiele, N. A., & Doughty, B. (2023) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.3c00386 · Cited by 22
Atia, T. A., Deferm, C., Machiels, L., Khoshkhoo, M., Riaño, S., & Binnemans, K. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.3c02612 · Cited by 20
Noah, N. F. M., Othman, N., Kahar, I. N. S., & Suliman, S. S. (2022) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2022.108976 · Cited by 18
Leaching and Recovery of Metals
Sethurajan, M., Lens, P. N. L., Horn, H. A., Figueiredo, L. H. A., & van Hullebusch, E. D. (2017) · Environmental chemistry for a sustainable world · doi:10.1007/978-3-319-61146-4_6 · Cited by 40
Xu, Y., Han, Z., Zhu, P., & Zhou, S. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2020.101381 · Cited by 19
Gómez, M., Grimes, S. M., & Fowler, G. D. (2024) · Journal of Environmental Management · doi:10.1016/j.jenvman.2024.121306 · Cited by 21
Ditopic receptors containing urea groups for solvent extraction of Cu( ii ) salts
Carreira‐Barral, I., Mato‐Iglesias, M., Blas, A. D., Platas‐Iglesias, C., Tasker, P. A., & Esteban‐Gómez, D. (2017) · Dalton Transactions · doi:10.1039/c7dt00093f · Cited by 18
Self-citationBożejewicz, D., Kaczorowska, M. A., & Witt, K. (2022) · Desalination and Water Treatment · doi:10.5004/dwt.2022.27862 · Cited by 19
Otgonbayar, U., Sandig‐Predzymirska, L., Thiere, A., & Charitos, A. (2024) · Hydrometallurgy · doi:10.1016/j.hydromet.2024.106303 · Cited by 22
Ion Exchange Resin Technology in Recovery of Precious and Noble Metals
Mohebbi, A., Mahani, A. A., & Izadi, A. (2019) · Springer eBooks · doi:10.1007/978-3-030-06085-5_9 · Cited by 23
Zhang, J., Wenzel, M., Schnaars, K., Hennersdorf, F., Schwedtmann, K., März, J., Roßberg, A., Kaden, P., Kraus, F., Stumpf, T., et al. (2021) · Dalton Transactions · doi:10.1039/d1dt00365h · Cited by 20
Ionic Couple-Driven Palladium Leaching by Organic Triiodide Solutions
Cuscusa, M., Rigoldi, A., Artizzu, F., Cammi, R., Fornasiero, P., Deplano, P., Marchiò, L., & Serpe, A. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00410 · Cited by 18
Dynamic Covalent Chemistry of Carbon Dioxide: Opportunities to Address Environmental Issues
Septavaux, J., Germain, G., & Leclaire, J. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00147 · Cited by 16
Auto-oxidation of redox electrodes for the selective recovery of platinum group metals
Chung, C., Cotty, S. R., Jeon, J., Elbert, J., & Su, X. (2024) · Journal of Materials Chemistry A · doi:10.1039/d4ta01384k · Cited by 20
Dhiman, S., Agarwal, S., & Gupta, H. (2024) · Journal of Ionic Liquids · doi:10.1016/j.jil.2024.100080 · Cited by 20
Cho, S., Vu, T. T., Seo, J., Cha, J., Choi, Y., & Song, D. (2025) · Waste Management · doi:10.1016/j.wasman.2025.114787 · Cited by 19
Han, Z., Wu, S., Wu, X., Guan, W., Cao, Z., Li, Q., Wang, M., & Zhang, G. (2023) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2023.110557 · Cited by 17
Mao, J., Yu, H., Ye, H., & You, L. (2020) · The Journal of Organic Chemistry · doi:10.1021/acs.joc.0c00051 · Cited by 16
α,β-Substituent effect of dialkylphosphinic acids on lanthanide extraction
Du, R., Yu, D., An, H., Zhang, S., Lu, R., Zhao, G., & Xiao, J. (2016) · RSC Advances · doi:10.1039/c6ra10214j · Cited by 16
Bodo, E., Ciavardini, A., Cort, A. D., Giannicchi, I., Mihan, F. Y., Fornarini, S., Vasile, S., Scuderi, D., & Piccirillo, S. (2014) · Chemistry - A European Journal · doi:10.1002/chem.201402788 · Cited by 15
Metadata
- Authors
- Wilson, A. M., Bailey, P. J., Tasker, P. A., Turkington, J. R., Grant, R. A., & Love, J. B.
- Affiliations
- University of Edinburgh (GB)
- Johnson Matthey (United Kingdom) (GB)
- Corresponding author
- Tasker, Peter A.
- Love, Jason B.
- Venue
- Chem. Soc. Rev.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 43
- Issue
- 1
- Pages
- 123-134
- ISSN
- 0306-0012 (ISSN-L)
- 1460-4744
- OpenAlex
- W2155752688
- Cited by
- 561
- References
- 36
- Citations by year
- 2026: 57 · 2025: 60 · 2024: 70 · 2023: 63 · 2022: 51 · 2021: 47 · 2020: 49 · 2019: 34 · 2018: 32 · 2017: 30 · 2016: 30 · 2015: 21 · 2014: 17
- FWCI
- 4.49
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by
- Locations
- Chemical Society Reviews (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Edinburgh Research Explorer (University of Edinburgh) (submittedVersion, cc-by)
- Funders
- Engineering and Physical Sciences Research Council
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
- Physical Sciences › Chemistry › Inorganic Chemistry › Radioactive element chemistry and processing
- Physical Sciences › Chemical Engineering › Filtration and Separation › Chemical and Physical Properties in Aqueous Solutions
- Keywords
- solvent extraction, coordination chemistry, metal ion extraction, donor atoms, second coordination sphere, hydrocarbon solvents, extraction selectivity, secondary bonds, hydrogen bonding, electrostatic interactions
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.