Solvent extraction: the coordination chemistry behind extractive metallurgy
Open accessThe DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index; none of the 57 sources its claims cite is checked for support yet.
Abstract
The modes of action of the commercial solvent extractants used in extractive hydrometallurgy are classified according to whether the recovery process involves the transport of metal cations, M(n+), metalate anions, MXx(n-), or metal salts, MXx into a water-immiscible solvent. Well-established principles of coordination chemistry provide an explanation for the remarkable strengths and selectivities shown by most of these extractants. Reagents which achieve high selectivity when transporting metal cations or metal salts into a water-immiscible solvent usually operate in the inner coordination sphere of the metal and provide donor atom types or dispositions which favour the formation of particularly stable neutral complexes that have high solubility in the hydrocarbons commonly used in recovery processes. In the extraction of metalates, the structures of the neutral assemblies formed in the water-immiscible phase are usually not well defined and the cationic reagents can be assumed to operate in the outer coordination spheres. The formation of secondary bonds in the outer sphere using, for example, electrostatic or H-bonding interactions are favoured by the low polarity of the water-immiscible solvents.
Overview
CoChat Summary
TL;DR
This tutorial review classifies commercial solvent extractants used in extractive hydrometallurgy by whether they transport metal cations, metalate anions, or metal salts into a water-immiscible solvent, and explains their strength and selectivity through inner- and outer-sphere coordination chemistry. It argues that understanding these coordination modes can guide the design of more efficient and sustainable metal-refining reagents.
Key findings
- Extractants are grouped into metal cation, metalate anion, and metal salt extractants; inner-sphere donor design controls cation and salt extraction, while metalate extraction relies on outer-sphere/ion-pair assemblies and is limited by the Hofmeister bias.
- Phenolic oximes used extensively in copper recovery account for ca. 25% of world production; Acorga P50 has pH1/2 < 1.0, and its pseudo-macrocyclic Cu(II) complex contributes to selectivity over Ni(II) and Zn(II).
- Phosphorus(V) acid extractants form stable dimers and often 4:1 ligand:metal complexes [M(L)2(LH)2]; their first-row M2+ extraction sequence is Zn > Cu > Mn > Co > Ni, not the Irving–Williams order, and D2EHPA is used in a 150,000 tonne p.a. zinc plant.
- A LIX63/Versatic 10 blend recovers Ni at a pH1/2 more than two units lower than either reagent alone; the ditopic reagent HNT gave 98% Ni recovery in a circuit with two extraction and one stripping stage, but commercial use failed because imine linkages hydrolyse under acidic stripping and selectivity for sulfate over chloride was insufficient.
Methods
- Tutorial review of the coordination chemistry underpinning commercial solvent extraction in extractive hydrometallurgy, focusing on examples where structures of assemblies formed in the water-immiscible phase are best defined.
- Draws on literature, commercial reagent formulations, pH-loading curves, distribution ratios, and X-ray crystal structures of model complexes; no primary experimental dataset is reported.
- Organised by extractant class: metal cation extractants (oximes, phosphorus(V) acids, carboxylic acids, hydroxamic acids, 8-hydroxyquinolines, β-diketones), metalate anion extractants, metal salt extractants, and synergistic systems.
Limitations
- The authors state that structures of neutral assemblies in commercial metalate extraction are usually not well defined, the origin of synergism in extractant blends is generally not well defined, and determining interfacial assemblies is challenging with ambiguity in the bulk water-immiscible phase.
- The authors note that their three-type classification is convenient but does not preclude extractants functioning in more than one role and does not deal with synergistic mixtures.
- Evident from the text: as a tutorial review, it synthesises selected well-understood examples rather than systematically assessing all commercial reagents, and it reports no new experimental data or quantitative meta-analysis.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures













![Fig. 7 The structure of [Ni(Ph2PO2)2(Ph2PO2H)2(DMF)2] from single crystal X-ray diffraction. 21](https://figures.cochat.ai/paper-figures/02dc7d3df7e34cb0bf7859cf3d7ed754/solvent-extraction-the-coordination-chemistry-behind-extractive-metallurgy-figure-7.png)




![Fig. 11 Loadings of [ZnCl4] 2 (blue lines) and [FeCl4] 2 (red lines) by TEHA and a closely related monoamido derivative (L1) as a function of chloride concentration in the aqueous feed.](https://figures.cochat.ai/paper-figures/6e4daaf3df684c08ad5c3b4df2543331/solvent-extraction-the-coordination-chemistry-behind-extractive-metallurgy-figure-11.png)
![Fig. 12 The structure of [UO2(NO3)2(iso-TBP)2] from single crystal X-ray diffraction. 39](https://figures.cochat.ai/paper-figures/88a2be3d04c24e11b920385e2520e7d2/solvent-extraction-the-coordination-chemistry-behind-extractive-metallurgy-figure-12.png)
![Fig. 13 Uptake of NiSO4 by HNT to give a neutral complex [Ni(HNT)SO4] containing a zwitterionic form of the ligand.](https://figures.cochat.ai/paper-figures/3826daaf4d2a49e9a8d2cf59ab39e6e3/solvent-extraction-the-coordination-chemistry-behind-extractive-metallurgy-figure-13.png)



Verification
Claims the paper makes
0 Valid · 14 Not valid · 54 Not checked · 70 Own results and interpretations
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“It is clear from the S-curve plots shown in Fig. 4 that Acorga P50 will reject Ni(II) and Zn(II) when Cu(II)”
§ Solvent extraction: the coordination chemistry behind extractive metallurgy † > Oxime extractants
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“In contrast, the monoamido derivative L1 in Fig. 11 is a much stronger extractant for Zn(II), requiring a lower concentration of chloride to effect 100% recovery of Zn(II) compared to Fe(III).”
§ Solvent extraction: the coordination chemistry behind extractive metallurgy † > Metalate anion extraction
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Also, the reagent is not sufficiently selective for sulfate over chloride to generate an NiSO 4 electrolyte of the purity required to operate a conventional sulfate electrowinning plant for nickel.40”
§ Solvent extraction: the coordination chemistry behind extractive metallurgy † > Scheme 4
What the sources say
- Not checked — no full text of the sourcecites [40] 40. J. H. Burns, G. M. Brown and R. R. Ryan, Acta Crystallogr., Sect. C: Cryst. Struct. Commun., 1985, 41, 1446-1448. source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Nickel can be stripped almost quantitatively by contacting the loaded organic phase with dilute sulfuric acid giving a 98% recovery in a circuit comprising two extraction and one stripping stage.40”
§ Solvent extraction: the coordination chemistry behind extractive metallurgy † > Scheme 4
What the sources say
- Not checked — no full text of the sourcecites [40] 40. J. H. Burns, G. M. Brown and R. R. Ryan, Acta Crystallogr., Sect. C: Cryst. Struct. Commun., 1985, 41, 1446-1448. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Commercial exploitation of this reagent for the recovery of nickel from pressure leaching of lateritic ores failed because the imine linkages are sensitive to hydrolysis under the acidic conditions preferred for stripping.”
§ Solvent extraction: the coordination chemistry behind extractive metallurgy † > Scheme 4
What the sources say
- Not checked — no full text of the sourcecites [40] 40. J. H. Burns, G. M. Brown and R. R. Ryan, Acta Crystallogr., Sect. C: Cryst. Struct. Commun., 1985, 41, 1446-1448. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
63 more claims
Create a free account to see all 138 claims and to verify the 2 references still open.
- It may state two separate claims as one. 53
- Probably not a substantial claim. 28
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Solvent extraction: the coordination chemistry behind extractive metallurgy † > Conclusions
“Figure: 11 Fig. 11 Fig. 11 Loadings of [ZnCl 4 ] 2À (blue lines) and [FeCl 4 ] 2À (red lines) by TEHA and a closely related monoamido derivative (L1) as a function of chloride concentration in the aqueous feed.”
§ Solvent extraction: the coordination chemistry behind extractive metallurgy † > Metalate anion extraction
“For example, tris-2-ethylhexylamine (TEHA) is a model for the trialkylamine reagents Alamine 330 etc., and shows the expected selectivity for FeCl 4 À over ZnCl 4 2À (Fig. 11).”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Solvent extraction: the coordination chemistry behind extractive metallurgy † > Conclusions
“Indeed, when the extractants transport metalate anions, MY x nÀ , the inner coordination sphere usually remains unchanged and it is only variations in the effectiveness of the secondary bonding which can give rise to selectivity and strength of recovery.”
§ Solvent extraction: the coordination chemistry behind extractive metallurgy † > Metalate anion extraction
“However, the relative stability of the metalates formed initially in the aqueous phase does contribute to the distribution coefficients for extraction.This is exploited to great effect in the separation of Co(II) from Ni(II) in the Outokumpu process.33”
Citations
Cites
Tylecote, R. F. (1977) · British Corrosion Journal · doi:10.1179/bcj.1977.12.3.137 · Cited by 386
U.S. Department of Energy Critical Materials Strategy
Bauer, D., Diamond, D., Li, J., Sandalow, D., Telleen, P., & Wanner, B. (2010) · doi:10.2172/1000846 · Cited by 301
Paiva, A. P., & Malik, P. (2004) · Journal of Radioanalytical and Nuclear Chemistry · doi:10.1023/b:jrnc.0000034890.23325.b5 · Cited by 290
Recovery of gallium from Bayer liquor: A review
Zhao, Z., Yang, Y., Xiao, Y., & Fan, Y. (2012) · Hydrometallurgy · doi:10.1016/j.hydromet.2012.06.002 · Cited by 225
A short history of hydrometallurgy
Habashi, F. (2005) · Hydrometallurgy · doi:10.1016/j.hydromet.2004.01.008 · Cited by 216
Cheng, C. Y. (2006) · Hydrometallurgy · doi:10.1016/j.hydromet.2006.05.002 · Cited by 168
Archaeometallurgy: The Study of Preindustrial Mining and Metallurgy
Killick, D. J., & Fenn, T. R. (2012) · Annual Review of Anthropology · doi:10.1146/annurev-anthro-092611-145719 · Cited by 147
Solvent extraction in southern Africa: An update of some recent hydrometallurgical developments
Sole, K. C., Feather, A. M., & Cole, P. M. (2005) · Hydrometallurgy · doi:10.1016/j.hydromet.2004.11.012 · Cited by 118
Solvent extraction in hydrometallurgy: Present and future
Ritcey, G. M. (2006) · Tsinghua Science and Technology · doi:10.1016/s1007-0214(06)70168-7 · Cited by 111
Solvent Extraction and Liquid Membranes
(2008) · doi:10.1201/9781420014112 · Cited by 110
Research works printed but not linked: 11
- Gramatyka, 2007, J. Achiev. Mater. Manuf. Eng., 20, 535
- J. Rankin , 4th High Temperature Processing Symposium, Swinburne University of Technology, Melborne, Australia, 2012
- Comprehensive Coordination Chemistry II, ed. P. A. Tasker, P. G. Plieger and L. C. West, Elsevier Ltd, Oxford, 2004
- G. A. Kordosky , 18th International Solvent Extraction Conference, Cape Town, South Africa, 2002
- S. F. Woollam and R. A.Grant, Solvent Extr.: Fundam. Ind. Appl., Proc. ISEC 2008, Int. Solvent Extr. Conf., Tuscon, Arizona, USA, 2008
- Kordosky, 1981, Miner. Eng., 33, 291
- V. Cocalia , T.Bednarski, D. J.Harris, H.Yáñez, A.Soto, M.Soderstrom and E.Kamenetzky, 19th International Solvent Extraction Conference, Santiago, Chile, 2011
- G. A. Kordosky , M. J.Virnig and P.Mattison, 18th International Solvent Extraction Conference, Cape Town, South Africa, 2002
- Moyer, 2005, Kem. Ind., 54, 65
- Reddy, 2012, Int. J. Res. Chem. Environ., 2, 158
- Huang, 2008, Guangpuxue Yu Guangpu Fenxi, 28, 2038
Cited by
Applications of Supramolecular Anion Recognition
Busschaert, N., Caltagirone, C., Van Rossom, W., & Gale, P. A. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00099 · Cited by 1,249
Or, T., Gourley, S. W. D., Kaliyappan, K., Yu, A., & Chen, Z. (2020) · Carbon Energy · doi:10.1002/cey2.29 · Cited by 559
Non-covalent interactions in the synthesis of coordination compounds: Recent advances
Mahmudov, K. T., Kopylovich, M. N., Guedes da Silva, M. F. C., & Pombeiro, A. J. L. (2017) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2016.09.002 · Cited by 368
Practical applications of supramolecular chemistry
Kolesnichenko, I. V., & Anslyn, E. V. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00078b · Cited by 334
Challenges and opportunities in the recovery of gold from electronic waste
Rao, M. D., Singh, K. K., Morrison, C. A., & Love, J. B. (2020) · RSC Advances · doi:10.1039/c9ra07607g · Cited by 268
Self-citationThe recovery and separation of lithium by using solvent extraction methods
Kanagasundaram, T., Murphy, O., Haji, M. N., & Wilson, J. J. (2024) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2024.215727 · Cited by 263
“Extractant 68 exists in organic non-polar solvents as a dimer ( 72 ), resulting in an eight-membered ring supported by strong hydrogen bonds (Scheme 14) [348,370].”
BackgroundAlvial-Hein, G., Mahandra, H., & Ghahreman, A. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126592 · Cited by 212
Synergistic Deep Eutectic Solvents for Lithium Extraction
Hanada, T., & Goto, M. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c07606 · Cited by 197
Abidli, A., Huang, Y., Ben Rejeb, Z., Zaoui, A., & Park, C. B. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.133102 · Cited by 194
Advances in applied supramolecular technologies
Williams, G. T., Haynes, C. J. E., Fares, M., Caltagirone, C., Hiscock, J. R., & Gale, P. A. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00948b · Cited by 188
Sustainable hydrophobic terpene-based eutectic solvents for the extraction and separation of metals
Schaeffer, N., Martins, M. A. R., Neves, C. M. S. S., Pinho, S. P., & Coutinho, J. A. P. (2018) · Chemical Communications · doi:10.1039/c8cc04152k · Cited by 189
Recycling copper and gold from e-waste by a two-stage leaching and solvent extraction process
Rao, M. D., Singh, K. K., Morrison, C. A., & Love, J. B. (2021) · Separation and Purification Technology · doi:10.1016/j.seppur.2021.118400 · Cited by 172
Self-citationA Simple Primary Amide for the Selective Recovery of Gold from Secondary Resources
Doidge, E. D., Carson, I., Tasker, P. A., Ellis, R. J., Morrison, C. A., & Love, J. B. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201606113 · Cited by 169
Self-citationTrinh, H. B., Lee, J.-C., Suh, Y.-J., & Lee, J. (2020) · Waste Management · doi:10.1016/j.wasman.2020.06.030 · Cited by 165
Porvali, A., Aaltonen, M., Ojanen, S., Velázquez-Martínez, O., Eronen, E., Liu, F., Wilson, B. P., Serna-Guerrero, R., & Lundström, M. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.11.023 · Cited by 169
“The extraction follows the following generalized reaction equation (Wilson et al., 2014):”
Selective Anion Extraction and Recovery Using a FeII4L4 Cage
Zhang, D., Ronson, T. K., Mosquera, J., Martinez, A., & Nitschke, J. R. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201800459 · Cited by 149
Pillararenes as macrocyclic hosts: a rising star in metal ion separation
Chen, L., Cai, Y., Feng, W., & Yuan, L. (2019) · Chemical Communications · doi:10.1039/c9cc03292d · Cited by 135
Yang, F., Yan, Z., Zhao, J. Q., Miao, S., Wang, D., & Yang, P. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta12124b · Cited by 127
Selective scandium ion capture through coordination templating in a covalent organic framework
Yuan, Y., Yang, Y., Meihaus, K. R., Zhang, S., Ge, X., Zhang, W., Faller, R., Long, J. R., & Zhu, G. (2023) · Nature Chemistry · doi:10.1038/s41557-023-01273-3 · Cited by 137
Nanoscale view of assisted ion transport across the liquid–liquid interface
Liang, Z., Bu, W., Schweighofer, K. J., Walwark, D. J., Harvey, J. S., Hanlon, G. R., Amoanu, D., Erol, C., Benjamin, I., & Schlossman, M. L. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1701389115 · Cited by 104
“Metal ion extraction is assisted by the formation of supramolecular complexes with a soluble organic extractant (5).”
BackgroundZheng, H., Ding, Y., Wen, Q. X., Liu, B., & Zhang, S. (2021) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2021.105417 · Cited by 135
Ellis, R. J., Brigham, D. M., Delmau, L. H., Ivanov, A. S., Williams, N. J., Vo, M. N., Reinhart, B. J., Moyer, B. A., & Bryantsev, V. S. (2016) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.6b02156 · Cited by 119
Chang, S. H. (2020) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-09639-7 · Cited by 121
Complexation‐Induced Supramolecular Assembly Drives Metal‐Ion Extraction
Ellis, R. J., Meridiano, Y., Muller, J. M., Berthon, L., Guilbaud, P., Zorz, N., Antonio, M. R., Demars, T. J., & Zemb, T. N. (2014) · Chemistry - A European Journal · doi:10.1002/chem.201403859 · Cited by 117
Schaeffer, N., Passos, H., Billard, I., Papaïconomou, N., & Coutinho, J. A. P. (2018) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2018.1477417 · Cited by 117
“62 Furthermore, hydrometallurgy allows the use of low process temperatures and recycling of reagents 63 (Wilson et al., 2014).”
Synergistic Solvent Extraction Is Driven by Entropy
Špadina, M., Bohinc, K., Zemb, T. N., & Dufrêche, J. (2019) · ACS Nano · doi:10.1021/acsnano.9b07605 · Cited by 96
Rodrigues, I. R., Deferm, C., Binnemans, K., & Riaño, S. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121326 · Cited by 97
Zhang, X., Shen, J., Pan, S., Qian, J., & Pan, B. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909014 · Cited by 102
Stamberga, D., Healy, M. R., Bryantsev, V. S., Albisser, C., Karslyan, Y., Reinhart, B. J., Paulenová, A., Foster, M., Popovs, I., Lyon, K. L., et al. (2020) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.0c02861 · Cited by 99
Brigham, D. M., Ivanov, A. S., Moyer, B. A., Delmau, L. H., Bryantsev, V. S., & Ellis, R. J. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07318 · Cited by 100
Hamza, M. F., Hamad, N. A., Hamad, D. M., Khalafalla, M. S., Abdel‐Rahman, A. A. ‐., Zeid, I., Wei, Y., Hessien, M. M., Fouda, A., & Salem, W. M. (2021) · Materials · doi:10.3390/ma14092189 · Cited by 107
Zemb, T. N., Bauer, C., Bauduin, P., Belloni, L., Déjugnat, C., Diat, O., Dubois, V., Dufrêche, J., Dourdain, S., Duvail, M., et al. (2014) · Colloid & Polymer Science · doi:10.1007/s00396-014-3447-x · Cited by 97
“complexation number), predictive modelling of liquid-liquid extraction requires determination of free energies beyond supra-molecular chemistry dealing only with complexes with an assumed fixed stoichiometry and coordination chemistry of the metallic cation to firstneighbour interactions only [34].”
BackgroundMerroune, A., Brahim, J. A., Berrada, M., Essakhraoui, M., Achiou, B., Mazouz, H., & Beniazza, R. (2024) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2024.04.042 · Cited by 99
Lommelen, R., Hoogerstraete, T. V., Onghena, B., Billard, I., & Binnemans, K. (2019) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.9b01782 · Cited by 98
Peeters, N., Binnemans, K., & Riaño, S. (2022) · Green Chemistry · doi:10.1039/d1gc03776e · Cited by 93
Porous Polyisothiocyanurates for Selective Palladium Recovery and Heterogeneous Catalysis
Song, K. S., Ashirov, T., Talapaneni, S. N., Clark, A. H., Yakimov, A. V., Nachtegaal, M., Copéret, C., & Coşkun, A. (2021) · Chem · doi:10.1016/j.chempr.2022.05.009 · Cited by 87
Lanthanide-alkali double sulfate precipitation from strong sulfuric acid NiMH battery waste leachate
Porvali, A., Wilson, B. P., & Lundström, M. (2017) · Waste Management · doi:10.1016/j.wasman.2017.10.031 · Cited by 86
“The desire to increase pH and simultaneously precipitate REEs can be understood as a necessity to prepare REE-free leachate for solvent extraction (Rodrigues and Mansur, 2010) which often requires higher pH (Wilson et al., 2014) than that used in the H2SO4 leaching of NiMH battery waste.”
BackgroundAntonio, M. R., McAlister, D. R., & Horwitz, E. P. (2014) · Dalton Transactions · doi:10.1039/c4dt01775g · Cited by 87
Li, Z., & Binnemans, K. (2020) · AIChE Journal · doi:10.1002/aic.16246 · Cited by 94
“Synergic SX systems (using mixtures of two or more extractants) often have much-improved separation performance compared with single-extractant systems.(21-24) β-diketones and some neutral ligands have been found to have synergism for Li extraction since the 1960s.”
BackgroundYoshida, W., Baba, Y., Kubota, F., Kolev, S. D., & Goto, M. (2018) · Journal of Membrane Science · doi:10.1016/j.memsci.2018.11.021 · Cited by 77
Liquid–liquid extraction of rhenium(VII) from an acidic chloride solution using Cyanex 923
Srivastava, R. R., Kim, M., Lee, J.-C., & Ilyas, S. (2015) · Hydrometallurgy · doi:10.1016/j.hydromet.2015.07.011 · Cited by 84
Maurice, A. A., Dinh, K. N., Charpentier, N. M., Brambilla, A., & Gabriel, J. P. (2021) · Sustainability · doi:10.3390/su131810357 · Cited by 90
How Hydrogen Bonds Affect the Growth of Reverse Micelles around Coordinating Metal Ions
Qiao, B., Demars, T. J., de la Cruz, M. O., & Ellis, R. J. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500495p · Cited by 75
Nonaqueous Solvent Extraction for Enhanced Metal Separations: Concept, Systems, and Mechanisms
Li, Z., Dewulf, B., & Binnemans, K. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.1c02287 · Cited by 77
“Each type of extractant extracts metal ions via di ff erent mechanisms, and they have been overviewed by, for instance, Wilson et al. 47 and Eyal et al. 48 All four types of extractants have been applied in NASX systems.”
Research Advances in Solvent Extraction of Lithium: The Potential of Ionic Liquids
Jiang, S., Zhang, J., Diao, K., Liu, X., & Ding, Z. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202423566 · Cited by 121
Ma, L., He, J., Wang, J., Zhou, Y., Zhao, Y. Q., Li, Y., Liu, X., Peng, L., & Qu, M. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b15952 · Cited by 75
Synergism as a phenomenon in solvent extraction of 4f-elements with calixarenes
Atanassova, M., & Kurteva, V. B. (2016) · RSC Advances · doi:10.1039/c5ra22306g · Cited by 77
Recovery and Recycling of Cerium from Primary and Secondary Resources- a Critical Review
Meshram, P., & Abhilash, P. (2019) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827508.2019.1677647 · Cited by 71
“The functional group such as P, N, O, or S acts as a metal complex with REEs, and the carbon chain is used to intensify extractant solubility in the solvent of choice (Wilson et al. 2014).”
BackgroundComplexation chemistry in liquid–liquid extraction of rhenium
(2015) · doi:10.1002/jctb.4707 · Cited by 71
Physical and Chemical Methods for Heavy Metal Removal
Yadav, M., Singh, G., & Jadeja, R. N. (2021) · Wiley eBooks · doi:10.1002/9781119693635.ch15 · Cited by 82
Urban mining of lithium-ion batteries in Australia: Current state and future trends
Boxall, N. J., King, S., Cheng, K. Y., Gumulya, Y., Bruckard, W. J., & Kaksonen, A. H. (2018) · Minerals Engineering · doi:10.1016/j.mineng.2018.08.030 · Cited by 74
Bourgeois, D., Maangar, A. E., & Dourdain, S. (2020) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2020.03.004 · Cited by 72
Ion Transport Mechanisms in Liquid–Liquid Interface
Qiao, B., Muntean, J. V., de la Cruz, M. O., & Ellis, R. J. (2017) · Langmuir · doi:10.1021/acs.langmuir.7b01230 · Cited by 62
Molecular Forces in Liquid–Liquid Extraction
Špadina, M., Dufrêche, J., Pellet‐Rostaing, S., Marčelja, S., & Zemb, T. N. (2021) · Langmuir · doi:10.1021/acs.langmuir.1c00673 · Cited by 75
Selective recovery and separation of rare earth elements by organophosphorus modified MIL-101(Cr)
Kavun, V., van der Veen, M. A., & Repo, E. (2020) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110747 · Cited by 71
Cathode recycling of lithium-ion batteries based on reusable hydrophobic eutectic solvents
Hanada, T., & Goto, M. (2022) · Green Chemistry · doi:10.1039/d1gc04846e · Cited by 64
Lashley, M. A., Ivanov, A. S., Bryantsev, V. S., Dai, S., & Hancock, R. D. (2016) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.6b02234 · Cited by 60
Extraction of lanthanides and actinides present in spent nuclear fuel and in electronic waste
Jesus, K. D., Rodriguez, R., Baek, D. L., Fox, R. V., Pashikanti, S., & Sharma, K. (2021) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2021.116006 · Cited by 63
Recovery of niobium and tantalum by solvent extraction from Sn–Ta–Nb mining tailings
Rodríguez, O., Alguacil, F. J., Escudero, E., García-Díaz, I., Fernández, P., Sotillo, B., & López, F. A. (2020) · RSC Advances · doi:10.1039/d0ra03331f · Cited by 58
Doidge, E. D., Kinsman, L. M. M., Ji, Y., Carson, I., Duffy, A. J., Kordas, I. A., Shao, E., Tasker, P. A., Ngwenya, B. T., Morrison, C. A., et al. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b03436 · Cited by 62
“transport of a single metal from an aqueous mixture of metals into a hydrophobic (organic) phase through coordination and/or supramolecular chemical recognition.(28) This scalable and economical method is used widely, producing high-purity metals in continuous flow with good materials balance.”
MethodSelf-citationRecent Progress in Ionic Liquid Extraction for the Separation of Rare Earth Elements
Okamura, H., & Hirayama, N. (2020) · Analytical Sciences · doi:10.2116/analsci.20sar11 · Cited by 68
Špadina, M., Bohinc, K., Zemb, T. N., & Dufrêche, J. (2019) · Langmuir · doi:10.1021/acs.langmuir.8b03846 · Cited by 55
Guilbaud, P., & Zemb, T. N. (2014) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2014.11.011 · Cited by 56
Chen, L., Chen, J., Jing, Y., & Li, D. (2015) · Hydrometallurgy · doi:10.1016/j.hydromet.2015.12.007 · Cited by 57
Green separation of lanthanum, cerium and nickel from waste nickel metal hydride battery
Vargas, S. J. R., Schaeffer, N., Souza, J. C., da Silva, L. H. M., & Hespanhol, M. C. (2021) · Waste Management · doi:10.1016/j.wasman.2021.02.038 · Cited by 53
Separation of Rare-Earth Elements Using Supported Liquid Membrane Extraction in Pilot Scale
Alemrajabi, M., Ricknell, J., Samak, S., Varela, R. R., Martínez, J., Hedman, F., Forsberg, K. M., & Rasmuson, Å. C. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c03268 · Cited by 55
Elucidating the speciation of extracted lanthanides by diglycolamides
Peroutka, A. A., Galley, S. S., & Shafer, J. C. (2023) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2023.215071 · Cited by 52
Baba, Y., Kubota, F., Goto, M., Cattrall, R. W., & Kolev, S. D. (2015) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.4725 · Cited by 51
Torrejos, R. E. C., Escobar, E. C., Han, J. W., Min, S. H., Yook, H., Parohinog, K. J., Koo, S., Kim, H., Nisola, G. M., & Chung, W. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130379 · Cited by 50
Metal-binding motifs of alkyl and aryl phosphinates; versatile mono and polynucleating ligands
Carson, I., Healy, M. R., Doidge, E. D., Love, J. B., Morrison, C. A., & Tasker, P. A. (2016) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2016.11.018 · Cited by 49
“Their ability to form stable complexes in solution , particularly with borderline or hard metal cations, is exploited in extractive hydrometallurgy using solvent extraction to achieve the concentration and separation of particular metals [16,17].”
Self-citationYang, Q., Cao, J., Yang, F., Liu, Y., Chen, M., Qin, R., Chen, L., & Yang, P. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129066 · Cited by 49
Metal Recognition Driven by Weak Interactions: A Case Study in Solvent Extraction
Poirot, R., Goff, X. F. L., Diat, O., Bourgeois, D., & Meyer, D. J. M. (2016) · ChemPhysChem · doi:10.1002/cphc.201600305 · Cited by 48
Selective Anion Extraction and Recovery Using a FeII4L4 Cage
(2018) · doi:10.1002/ange.201800459 · Cited by 48
Origins of Clustering of Metalate–Extractant Complexes in Liquid–Liquid Extraction
Nayak, S., Kumal, R. R., Liu, Z., Qiao, B., Clark, A. E., & Uysal, A. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c23158 · Cited by 51
Atanassova, M., Kurteva, V. B., & Dukov, I. L. (2016) · RSC Advances · doi:10.1039/c6ra18478b · Cited by 47
Investigation of f-Element Interactions with Functionalized Diamides of Phenanthroline-Based Ligands
Archer, E. M., Galley, S. S., Jackson, J. A., & Shafer, J. C. (2023) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299.2023.2239866 · Cited by 46
“[13,14] It is important to not ignore impacts beyond M-L coordination chemistry such as dynamical, chemically-weak and long-range forces that lead to unusual chemical, physical, and phase behaviors.”
BackgroundRey, J., Dourdain, S., Berthon, L., Jestin, J., Pellet‐Rostaing, S., & Zemb, T. N. (2015) · Langmuir · doi:10.1021/acs.langmuir.5b01478 · Cited by 52
Enhancing Metal Separations by Liquid–Liquid Extraction Using Polar Solvents
Li, Z., Zhang, Z., Smolders, S., Li, X., Raiguel, S., Nies, E., Vos, D. E. D., & Binnemans, K. (2019) · Chemistry - A European Journal · doi:10.1002/chem.201901800 · Cited by 46
Batchu, N. K., Hoogerstraete, T. V., Banerjee, D., & Binnemans, K. (2017) · RSC Advances · doi:10.1039/c7ra09144c · Cited by 48
Tuning the Separation of Light Lanthanides Using a Reverse-Size Selective Aqueous Complexant
Thiele, N. A., Fiszbein, D. J., Woods, J. J., & Wilson, J. J. (2020) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.0c02413 · Cited by 45
Zhang, J., Tanjedrew, N., Wenzel, M., Royla, P., Du, H., Kiatisevi, S., Lindoy, L. F., & Weigand, J. J. (2023) · Angewandte Chemie International Edition · doi:10.1002/anie.202216011 · Cited by 46
Qiao, B., Skanthakumar, S., & Soderholm, L. (2018) · Journal of Chemical Theory and Computation · doi:10.1021/acs.jctc.7b01018 · Cited by 42
Wu, Y., Li, W., Vovers, J., Lu, H. T., Stevens, G. W., & Mumford, K. A. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.136054 · Cited by 41
Liu, Y., Lee, M. S., & Senanayake, G. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.07.097 · Cited by 42
Doidge, E. D., Carson, I., Love, J. B., Morrison, C. A., & Tasker, P. A. (2016) · Solvent Extraction and Ion Exchange · doi:10.1080/07366299.2016.1245051 · Cited by 37
“In general, three different approaches can be used to transfer a metal into a water-immiscible solvent by generating a neutral hydrophobic assembly.([5]) REE extraction most commonly involves the transfer of a “metal salt” using a”
BackgroundMethodSelf-citationSchaeffer, N., Gras, M., Passos, H., Mogilireddy, V., Mendonça, C., Pereira, E., Chaînet, E., Billard, I., Coutinho, J. A. P., & Papaïconomou, N. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b05754 · Cited by 40
Li, Z., Onghena, B., Li, X., Zhang, Z., & Binnemans, K. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b03472 · Cited by 48
Carson, I., MacRuary, K. J., Doidge, E. D., Ellis, R. J., Grant, R. A., Gordon, R. J., Love, J. B., Morrison, C. A., Nichol, G. S., Tasker, P. A., et al. (2015) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.5b01317 · Cited by 40
Self-citation
Metadata
- Authors
- Wilson, A. M., Bailey, P. J., Tasker, P. A., Turkington, J. R., Grant, R. A., & Love, J. B.
- Affiliations
- University of Edinburgh (GB)
- Johnson Matthey (United Kingdom) (GB)
- Corresponding author
- Tasker, Peter A.
- Love, Jason B.
- Venue
- Chem. Soc. Rev.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 43
- Issue
- 1
- Pages
- 123-134
- ISSN
- 0306-0012 (ISSN-L)
- 1460-4744
- OpenAlex
- W2155752688
- Cited by
- 561
- References
- 36
- Citations by year
- 2026: 57 · 2025: 60 · 2024: 70 · 2023: 63 · 2022: 51 · 2021: 47 · 2020: 49 · 2019: 34 · 2018: 32 · 2017: 30 · 2016: 30 · 2015: 21 · 2014: 17
- FWCI
- 4.49
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by
- Locations
- Chemical Society Reviews (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Edinburgh Research Explorer (University of Edinburgh) (submittedVersion, cc-by)
- Funders
- Engineering and Physical Sciences Research Council
- Topics
- Physical Sciences › Materials Science › Metals and Alloys › Extraction and Separation Processes
- Physical Sciences › Chemistry › Inorganic Chemistry › Radioactive element chemistry and processing
- Physical Sciences › Chemical Engineering › Filtration and Separation › Chemical and Physical Properties in Aqueous Solutions
- Keywords
- solvent extraction, coordination chemistry, metal ion extraction, donor atoms, second coordination sphere, hydrocarbon solvents, extraction selectivity, secondary bonds, hydrogen bonding, electrostatic interactions
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.