The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Aerosol-assisted delivery of precursors for chemical vapour deposition: expanding the scope of CVD for materials fabrication
Abstract
The production of thin films of materials has become the attention of a great deal of research throughout academia and industry worldwide owing to the array of applications which utilise them, including electronic devices, gas sensors, solar cells, window coatings and catalytic systems. Whilst a number of deposition techniques are in common use, chemical vapour deposition (CVD) is an attractive process for the production of a wide range of materials due to the control it offers over film composition, coverage and uniformity, even on large scales. Conventional CVD processes can be limited, however, by the need for suitably volatile precursors. Aerosol-assisted (AA)CVD is a solution-based process which relies on the solubility of the precursor, rather than its volatility and thus vastly extends the range of potentially applicable precursors. In addition, AACVD offers extra means to control film morphology and concurrently the properties of the deposited materials. In this perspective we discuss the AACVD process, the influence of deposition conditions on film characteristics and a number of materials and applications to which AACVD has been found beneficial.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Purity of the sacred lotus, or escape from contamination in biological surfaces
Barthlott, W., & Neinhuis, C. (1997) · Planta · doi:10.1007/s004250050096 · Cited by 6,860
Synthesis of thiol-derivatised gold nanoparticles in a two-phase Liquid–Liquid system
Brust, M., Walker, M., Bethell, D., Schiffrin, D. J., & Whyman, R. (1994) · J. Chem. Soc., Chem. Commun. · doi:10.1039/c39940000801 · Cited by 6,707
Oxides Which Show a Metal-to-Insulator Transition at the Neel Temperature
Morin, F. J. (1959) · Physical Review Letters · doi:10.1103/physrevlett.3.34 · Cited by 3,841
Optical properties and electronic structure of amorphous Ge and Si
Tauc, J. (1968) · Materials Research Bulletin · doi:10.1016/0025-5408(68)90023-8 · Cited by 3,571
Metal Oxide Gas Sensors: Sensitivity and Influencing Factors
Wang, C., Yin, L., Zhang, L., Xiang, D., & Gao, R. (2010) · Sensors · doi:10.3390/s100302088 · Cited by 2,928
Chemical vapour deposition of coatings
Choy, K. (2003) · Progress in Materials Science · doi:10.1016/s0079-6425(01)00009-3 · Cited by 1,655
Transparent conductors as solar energy materials: A panoramic review
Granqvist, C. G. (2007) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2007.04.031 · Cited by 1,566
The effect of grain size on the sensitivity of nanocrystalline metal-oxide gas sensors
Rothschild, A., & Komem, Y. (2004) · Journal of Applied Physics · doi:10.1063/1.1728314 · Cited by 628
ZnO nanoparticulate thin film: preparation, characterization and gas-sensing property
Cheng, X., Zhao, H., Huo, L., Gao, S., & Zhao, J. G. (2004) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2004.04.080 · Cited by 430
Al-doped ZnO thin films as methanol sensors
Sahay, P. P., & Nath, R. (2008) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2008.06.006 · Cited by 395
Crick, C. R., Ismail, S., Pratten, J., & Parkin, I. P. (2011) · Thin Solid Films · doi:10.1016/j.tsf.2011.01.282 · Cited by 212
Self-citationRecent trends on nanocomposites based on Cu, Ag and Au clusters: A closer look
Armelao, L., Barreca, D., Bottaro, G., Gasparotto, A., Gross, S., Maragno, C., & Tondello, E. (2006) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2005.12.003 · Cited by 209
Crick, C. R., Bear, J. C., Kafizas, A., & Parkin, I. P. (2012) · Advanced Materials · doi:10.1002/adma.201201239 · Cited by 179
Self-citationTakada, T., Suzuki, K., & Nakane, M. (1993) · Sensors and Actuators B: Chemical · doi:10.1016/0925-4005(93)85412-4 · Cited by 159
Noor, N., & Parkin, I. P. (2012) · Journal of Materials Chemistry C · doi:10.1039/c2tc00400c · Cited by 128
Self-citationExpression of two distinct types of pili by a hospital-acquired Enterococcus faecium isolate
Hendrickx, A. P. A., Bonten, M. J. M., van Luit‐Asbroek, M., Schapendonk, C. M. E., Kragten, A. H. M., & Willems, R. J. L. (2008) · Microbiology · doi:10.1099/mic.0.2008/020891-0 · Cited by 118
Room-temperature-functioning ammonia sensor based on solid-state CuxS films
Galdikas, A., Mironas, A., Strazdien≐, V., Šetkus, A., Ancutien≐, I., & Janickis, V. (2000) · Sensors and Actuators B Chemical · doi:10.1016/s0925-4005(00)00408-1 · Cited by 91
Highly sensitive hydrogen sulphide sensors operable at room temperature
Sen, S., Bhandarkar, V., Muthe, K. P., Roy, M., Deshpande, S. K., Aiyer, R. C., Gupta, S. K., Yakhmi, J. V., & Sahni, V. C. (2005) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2005.09.013 · Cited by 70
Bloor, L. G., Manzi, J. A., Binions, R., Parkin, I. P., Pugh, D., Afonja, A., Blackman, C. S., Sathasivam, S., & Carmalt, C. J. (2012) · Chemistry of Materials · doi:10.1021/cm300596c · Cited by 68
Self-citationSato, Y., NOMURA, T., Tanaka, H., & Kobayakawa, K. (1991) · Journal of The Electrochemical Society · doi:10.1149/1.2086069 · Cited by 68
Aerosol-Assisted Chemical Vapor Deposition of Transparent Conductive Gallium−Indium−Oxide Films
Knapp, C. E., Hyett, G., Parkin, I. P., & Carmalt, C. J. (2011) · Chemistry of Materials · doi:10.1021/cm102292b · Cited by 67
Self-citationPalgrave, R. G., & Parkin, I. P. (2007) · Chemistry of Materials · doi:10.1021/cm0629006 · Cited by 67
Self-citationKafizas, A., Dunnill, C. W., & Parkin, I. P. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01244k · Cited by 56
Self-citationCross, W. B., & Parkin, I. P. (2003) · Chemical Communications · doi:10.1039/b303800a · Cited by 54
Self-citationAkhtar, J., Malik, M. A., O’Brien, P., & Helliwell, M. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00830c · Cited by 51
Sulfur‐ and Nitrogen‐Doped Titania Biomaterials via APCVD
Dunnill, C. W., Aiken, Z. A., Pratten, J. R., Wilson, M., & Parkin, I. P. (2010) · Chemical Vapor Deposition · doi:10.1002/cvde.200906836 · Cited by 36
Self-citationMcNally, C. S., Turner, D. P., Kulak, A. N., Meldrum, F. C., & Hyett, G. (2011) · Chemical Communications · doi:10.1039/c2cc14468a · Cited by 27
Metadata
- Authors
- Marchand, P., Hassan, I. A., Parkin, I. P., & Carmalt, C. J.
- Venue
- Dalton Transactions
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 42
- Issue
- 26
- Pages
- 9406
- ISSN
- 1477-9226 (ISSN-L)
- 1477-9234
- OpenAlex
- W1987882158
- Cited by
- 257
- References
- 29
- FWCI
- 12.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.