Mechanism of stabilization of dicalcium silicate solid solution with aluminium
Open accessThe DOI matches its Crossref record.
Abstract
Stoichiometric dicalcium silicate, Ca2SiO4, displays a well-known polymorphism with temperature. When this phase is doped by a range of elements, belite, one of the main phases of cements, is generated. Here, we thoroughly study the aluminum doping of dicalcium silicate. This type of study is important for cement characterization and also from a basic point of view. Ca2Si(1-2x)Al(2x)O(4-x)□(x) (x = 0, 0.010, 0.014, 0.03) has been prepared and studied by X-ray powder diffraction and the Rietveld method. The limiting composition has been established as Ca2Si0.972Al0.028O3.986□0.014. The (27)Al MAS NMR band located close to ~-70 ppm is ascribed to tetrahedral environments, in agreement with the proposed aliovalent Si/Al atomic substitution mechanism. Thermal analysis measurements under a wet atmosphere indirectly confirm the increase of oxygen vacancies as the amount of incorporated protons increases with the aluminium content. A thorough electrical characterization has been carried out including overall conductivity measurements under wet and dry atmospheres and conductivity as a function of the oxygen partial pressure. The samples show oxide anion conductivity with a small p-type electronic contribution under oxidizing conditions. These compounds display a very important proton contribution to the overall conductivities under humidified atmospheres.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Research review of cement clinker chemistry
Ludwig, H.-M., & Zhang, W. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.05.018 · Cited by 339
Cuesta, A., Santacruz, I., De la Torre, A. G., Dapiaggi, M., Zea-Garcia, J. D., & Aranda, M. A. G. (2021) · Cement and Concrete Research · doi:10.1016/j.cemconres.2021.106405 · Cited by 168
Self-citationStructure of stratlingite and effect of hydration methodology on microstructure
Santacruz, I., Torre, Á. G. D. L., Álvarez-Pinazo, G., Cabeza, A., Cuesta, A., Sanz, J., & Aranda, M. A. G. (2016) · Advances in Cement Research · doi:10.1680/adcr.14.00104 · Cited by 65
“…(Balonis and Glaser, 2009) of single phases that are involved in the hydration of cements, such as ye'elimite (Cuesta et al., 2013), belite (Cuesta et al., 2012; Cuesta et al., 2014), alite (De la Torre et al., 2002), katoite (Dilnesa et al., 2014), stratlingite (Kwan et al., 1995), and so on.”
BackgroundSelf-citationX-ray Total Scattering Study of Phases Formed from Cement Phases Carbonation
Cuesta, A., De la Torre, A. G., & Aranda, M. A. G. (2021) · Minerals · doi:10.3390/min11050519 · Cited by 14
“014 where the symbol ? stands for oxygen vacancies, named as β-C2S, which was prepared as detailed in [49].”
BackgroundSelf-citation
Metadata
- Authors
- Cuesta, A., Aranda, M. A. G., Sanz, J., de la Torre, Á. G., & Losilla, E. R.
- Venue
- Dalton Trans.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 43
- Issue
- 5
- Pages
- 2176-2182
- ISSN
- 1477-9226 (ISSN-L)
- 1477-9234
- OpenAlex
- W2154529814
- Cited by
- 40
- References
- 0
- FWCI
- 2.90
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanism of stabilization of dicalcium silicate solid solution with aluminium. https://app.cochat.ai/papers/10.1039/c3dt52194j
- The paper
- Cuesta, A., Aranda, M. A. G., Sanz, J., de la Torre, Á. G., & Losilla, E. R. (2014). Mechanism of stabilization of dicalcium silicate solid solution with aluminium. Dalton Trans. https://doi.org/10.1039/c3dt52194j
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.