CoChat

The DOI matches its Crossref record; 80 of the 80 references it cites were found in a registry or an index; 6 of the 31 sources its claims cite were checked for support.

X-ray Total Scattering Study of Phases Formed from Cement Phases Carbonation

Open access
Cuesta, Ana, De la Torre, Angeles G., Aranda, Miguel A. G. · 2021 · Minerals

Abstract

Carbonation in cement binders has to be thoroughly understood because it affects phase assemblage, binder microstructure and durability performance of concretes. This is still not the case as the reaction products can be crystalline, nanocrystalline and amorphous. The characterisation of the last two types of components are quite challenging. Here, carbonation reactions have been studied in alite-, belite- and ye’elimite-containing pastes, in controlled conditions (3% CO2 and RH = 65%). Pair distribution function (PDF) jointly with Rietveld and thermal analyses have been applied to prove that ettringite decomposed to yield crystalline aragonite, bassanite and nano-gibbsite without any formation of amorphous calcium carbonate. The particle size of gibbsite under these conditions was found to be larger (~5 nm) than that coming from the direct hydration of ye’elimite with anhydrite (~3 nm). Moreover, the carbonation of mixtures of C-S-H gel and portlandite, from alite and belite hydration, led to the formation of the three crystalline CaCO3 polymorphs (calcite, aragonite and vaterite), amorphous silica gel and amorphous calcium carbonate. In addition to their PDF profiles, the thermal analyses traces are thoroughly analysed and discussed.

Overview

CoChat Summary

TL;DR

Synchrotron total scattering (PDF) combined with Rietveld and thermal analysis tracked carbonation of ye’elimite/anhydrite, alite, and belite pastes at 3% CO₂ and 65% RH. Ettringite carbonation formed crystalline aragonite, bassanite, and nano-gibbsite without amorphous calcium carbonate, while C-S-H/portlandite carbonation formed all three crystalline CaCO₃ polymorphs plus amorphous silica gel and amorphous calcium carbonate.

Key findings

  • Hydration of ye’elimite with anhydrite yielded ettringite and nanocrystalline gibbsite (~3 nm); after carbonation, bassanite, aragonite, and nano-gibbsite formed, with gibbsite ~5 nm and no appreciable amorphous calcium carbonate. Rietveld for Y-A_carb gave bassanite 38.6 wt%, aragonite 23.4 wt%, nano-gibbsite 37.9 wt%; PDF gave 34, 21, and 45 wt%, respectively, with gibbsite Spd = 4.6 nm.
  • Carbonation of C₃S paste produced the three crystalline CaCO₃ polymorphs: Rietveld C₃S_carb gave calcite 26.8 wt%, vaterite 34.1 wt%, aragonite 38.5 wt%; PDF high-r gave aragonite 44 wt%, vaterite 30 wt%, calcite 26 wt%. C₂S_carb Rietveld gave calcite 43.1 wt%, aragonite 42.9 wt%, vaterite 5.9 wt%, and β-C₂S 8.1 wt%; PDF gave aragonite 48 wt%, calcite 36 wt%, β-C₂S 16 wt%.
  • Differential PDF established coexisting amorphous silica gel and amorphous calcium carbonate in C₃S_carb and C₂S_carb, though ACC quantification was not possible. Thermal modes II and III were linked to C-S-H carbonation, with larger C-S-H content giving larger mode II/III contributions.
  • Crystalline CaCO₃ polymorph contents were highly variable across the three studied samples, and the paper states the conditions for their formation still cannot be rationalised.

Methods

  • Three anhydrous samples were used: Y-A (orthorhombic ye’elimite plus 31.0 wt% anhydrite), t-C₃S, and β-C₂S containing 8.4(3) wt% γ-C₂S. Pastes were prepared at w/s 0.85 for Y-A, 0.50 for t-C₃S, and 0.45 for β-C₂S; hydrated for 1.5 months (Y-A), 5 months (C₃S), and 12 months (C₂S); then carbonated for 80 days at 3% CO₂, 20 °C, and RH 65%.
  • Synchrotron X-ray powder diffraction was collected at ALBA BL04-MSPD (λ = 0.41318(1) Å, 1–130° 2θ; five ~40 min patterns merged). Rietveld analysis used GSAS; PDF analysis used PDFgetX3 with Qmax = 21 Å⁻¹ and PDFGui, with a multi r-range approach (high 4.0–6.0 nm for crystalline phases; low 1.6–4.0 nm for nanocrystalline/amorphous components) and differential PDF.
  • Thermal analysis (DTA/TGA) ran from room temperature to 1000 °C at 10 °C/min under synthetic air; particle size distribution was measured by laser diffraction and BET surface area by N₂ adsorption.

Limitations

  • The paper states that the conditions controlling crystalline CaCO₃ polymorph formation still cannot be rationalised; PDF and expected reaction values disagreed and “more research is needed to clarify this disagreement”; mode III weight loss was too large to assign solely to amorphous calcium carbonate; a small proportion of ACC and/or amorphous Al(OH)₃ gel could not be ruled out in Y-A_carb; ACC quantification was not possible; the C₂S_hyd PDF fit was poorest (R_W = 42.4%) with unaccounted scattering contributions; structural descriptions for nanocrystalline/amorphous components were lacking; it is not known whether ACC phases crystallise on heating; and differential PDF could not unequivocally demonstrate amorphous silica.
  • Evident from the text: the study uses three synthetic/reference pastes under one accelerated carbonation condition (3% CO₂, RH 65%), not real concrete, and the paper explicitly focuses on phase changes while not considering microstructure or durability performance.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/min11050519

Cites

80 of 80 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 Sketch of the experimental procedure employed to prepare the samples.
Figure 1 Sketch of the experimental procedure employed to prepare the samples.CC-BY · From the PDF
Figure 2 Synchrotron X-ray total scattering functions, S(Q), for the studied cement samples. The patterns were normalised with respect to their highest diffraction peaks and vertically displaced for adequate visualisation.
Figure 2 Synchrotron X-ray total scattering functions, S(Q), for the studied cement samples. The patterns were normalised with respect to their highest diffraction peaks and vertically displaced for adequate visualisation.CC-BY · From the PDF
Figure 3 Selected low angle ranges (intensity vs 2 θ ) of the synchrotron Rietveld plots ( λ = 0.41 Å) for ( a ) Y-A_hyd, hydrated for 1.5 months and ( b ) Y-A_carb paste after carbonation for 80 days at 3% of CO2 (T = 20 ◦ C and RH = 65%). The top pattern contains crystalline ettringite and very broad diffraction peaks of nano-gibbsite. The main peaks are labelled. Top pattern: ettringite (E) and nanocrystalline-gibbsite ( nc-G ). Bottom pattern: aragonite (A), bassanite (B), nanocrystalline-gibbsite ( nc-G ) [including their (hkl) indexes].
Figure 3 Selected low angle ranges (intensity vs 2 θ ) of the synchrotron Rietveld plots ( λ = 0.41 Å) for ( a ) Y-A_hyd, hydrated for 1.5 months and ( b ) Y-A_carb paste after carbonation for 80 days at 3% of CO2 (T = 20 ◦ C and RH = 65%). The top pattern contains crystalline ettringite and very broad diffraction peaks of nano-gibbsite. The main peaks are labelled. Top pattern: ettringite (E) and nanocrystalline-gibbsite ( nc-G ). Bottom pattern: aragonite (A), bassanite (B), nanocrystalline-gibbsite ( nc-G ) [including their (hkl) indexes].CC-BY · From the PDF
Figure 4 Selected low angle ranges (intensity vs. 2 θ ) of the synchrotron Rietveld plots ( λ = 0.41 Å) for ( a ) hydrated t-C3S for 5 months and ( b ) the C3 S paste after carbonation for 80 days at 3% of CO2 (T = 20 ◦ C and RH = 65%). The main peaks are labelled. Top pattern: Portlandite (CH), alite (C3 S) and nanocrystalline C-S-H gel ( nc-C-S-H ). Bottom pattern: calcite (C), aragonite (A) and vaterite (V). The increase in the background centred at ~7 ◦ /2 θ for C3 S_carb is highlighted.
Figure 4 Selected low angle ranges (intensity vs. 2 θ ) of the synchrotron Rietveld plots ( λ = 0.41 Å) for ( a ) hydrated t-C3S for 5 months and ( b ) the C3 S paste after carbonation for 80 days at 3% of CO2 (T = 20 ◦ C and RH = 65%). The main peaks are labelled. Top pattern: Portlandite (CH), alite (C3 S) and nanocrystalline C-S-H gel ( nc-C-S-H ). Bottom pattern: calcite (C), aragonite (A) and vaterite (V). The increase in the background centred at ~7 ◦ /2 θ for C3 S_carb is highlighted.CC-BY · From the PDF
Image 5
CC-BY · From the PDF
Figure 6 Experimental (blue circles) and fitted (red solid line) PDF patterns for Y-A_hyd: ( a , b ) panels and Y-A_carb: ( c , d ) panels. Difference curves are shown as grey lines at the bottom of each panel.
Figure 6 Experimental (blue circles) and fitted (red solid line) PDF patterns for Y-A_hyd: ( a , b ) panels and Y-A_carb: ( c , d ) panels. Difference curves are shown as grey lines at the bottom of each panel.CC-BY · From the PDF
Figure 7 Experimental (blue circles) and fitted (red solid line) large r-range PDF patterns for ( a ) C3S_hyd, ( b ) C3 S_carb, ( c ) C2 S_hyd and ( d ) C2 S_carb. Difference curves are shown as grey lines at the bottom of each panel.
Figure 7 Experimental (blue circles) and fitted (red solid line) large r-range PDF patterns for ( a ) C3S_hyd, ( b ) C3 S_carb, ( c ) C2 S_hyd and ( d ) C2 S_carb. Difference curves are shown as grey lines at the bottom of each panel.CC-BY · From the PDF
Figure 8 Low r-range differential PDF patterns for ( a ) C3 S_hyd, ( b ) C3 S_carb, ( c ) C2 S_hyd and ( d ) C2 S_carb. These traces display the difference between the raw PDFs patterns and the calculated contributions from the crystalline contents through the fits to the high r-range region as displayed in Figure 7. Therefore, these are the contributions of the nanocrystalline and amorphous phase contents. Prominent peaks due to amorphous silica (black) and amorphous calcium carbonate (blue) are labelled for the carbonated samples.
Figure 8 Low r-range differential PDF patterns for ( a ) C3 S_hyd, ( b ) C3 S_carb, ( c ) C2 S_hyd and ( d ) C2 S_carb. These traces display the difference between the raw PDFs patterns and the calculated contributions from the crystalline contents through the fits to the high r-range region as displayed in Figure 7. Therefore, these are the contributions of the nanocrystalline and amorphous phase contents. Prominent peaks due to amorphous silica (black) and amorphous calcium carbonate (blue) are labelled for the carbonated samples.CC-BY · From the PDF
Figure 9 Thermal analysis traces (green: weight losses, blue: derivative of the weight losses and brown: heat flow) for ( a ) Y-A_hyd, and ( b ) Y-A_carb. For Y-A_hyd, the reported weight losses 8.3 and 51.0% were calculated from the temperature ranges 175-300 and RT-900 ◦ C, respectively. For Y-A_carb, the reported weight losses 10.4, 9.2 and 34.3% were calculated from the temperature ranges 160-310, 500-825 and RT-900 ◦ C, respectively.
Figure 9 Thermal analysis traces (green: weight losses, blue: derivative of the weight losses and brown: heat flow) for ( a ) Y-A_hyd, and ( b ) Y-A_carb. For Y-A_hyd, the reported weight losses 8.3 and 51.0% were calculated from the temperature ranges 175-300 and RT-900 ◦ C, respectively. For Y-A_carb, the reported weight losses 10.4, 9.2 and 34.3% were calculated from the temperature ranges 160-310, 500-825 and RT-900 ◦ C, respectively.CC-BY · From the PDF
Figure 10 Thermal analysis traces as in Figure 9 for ( a ) C3 S_hyd and ( b ) C3 S_carb. For C3 S_hyd, the reported weight losses 5.6 and 32.9% were calculated from the slope method centred at 460 ◦ C (to correct from the C-S-H contribution at these temperatures) and RT-900 ◦ C, respectively. For C3S_carb, the reported weight losses 8.2, 16.1, 14.4 and 38.8% were calculated from the temperature ranges RT-450, 450-700, 700-900 and RT-950 ◦ C, respectively.
Figure 10 Thermal analysis traces as in Figure 9 for ( a ) C3 S_hyd and ( b ) C3 S_carb. For C3 S_hyd, the reported weight losses 5.6 and 32.9% were calculated from the slope method centred at 460 ◦ C (to correct from the C-S-H contribution at these temperatures) and RT-900 ◦ C, respectively. For C3S_carb, the reported weight losses 8.2, 16.1, 14.4 and 38.8% were calculated from the temperature ranges RT-450, 450-700, 700-900 and RT-950 ◦ C, respectively.CC-BY · From the PDF
Figure 11 Thermal analysis traces as in Figure 9 for ( a ) C2 S_hyd and ( b ) C2 S_carb. For C2 S_hyd, the reported weight losses 0.6 and 32.8% were calculated from the slope method centred at 420 ◦ C (to correct from the C-S-H contribution at these temperatures) and RT-900 ◦ C, respectively. For C2S_carb, the reported weight losses 11.2, 18.5, 6.0 and 35.8% were calculated from the temperature ranges RT-450, 450-700, 700-900 and RT-950 ◦ C, respectively.
Figure 11 Thermal analysis traces as in Figure 9 for ( a ) C2 S_hyd and ( b ) C2 S_carb. For C2 S_hyd, the reported weight losses 0.6 and 32.8% were calculated from the slope method centred at 420 ◦ C (to correct from the C-S-H contribution at these temperatures) and RT-900 ◦ C, respectively. For C2S_carb, the reported weight losses 11.2, 18.5, 6.0 and 35.8% were calculated from the temperature ranges RT-450, 450-700, 700-900 and RT-950 ◦ C, respectively.CC-BY · From the PDF

Verification

Claims the paper makes

6 Valid · 0 Not valid · 12 Not checked · 101 Own results and interpretations

67 more claims

Create a free account to see all 119 claims and to verify the 4 references still open.

See all claims — free account
  • It may state two separate claims as one. 39
  • Probably not a substantial claim. 13
  • The quote only partly states this claim. 3

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Show all 71 references

Research works printed but not linked: 3

  1. Egami, T., and Billinge, S.J.L. (2012). Underneath the Bragg Peaks: Structural Analysis of Complex Materials, Elsevier Science, Pergamon. [2nd ed.].
  2. Larson, 2004, General structure analysis system (GSAS), Los Alamos Natl. Lab. Rep. LAUR, 748, 86
  3. Golovastikov, 1975, Crystal structure of the tricalcium silicate (CaOSi2)3=C3S, Kristallografiya, 20, 721

Metadata

Authors
Cuesta, A., De la Torre, A. G., & Aranda, M. A. G.
Affiliations
  • Universidad de Málaga (ES)
  • Departamento de Química Inorgánica, Cristalografía y Mineralogía, Universidad de Málaga, 29071 Málaga, Spain
Corresponding author
Cuesta, Ana
Venue
Minerals
Publisher
MDPI AG
Published
2021-05-14
Volume
11
Issue
5
Pages
519
ISSN
2075-163X (ISSN-L)
OpenAlex
W3161691179
Cited by
14
References
71
Citations by year
2026: 6 · 2025: 3 · 2024: 1 · 2023: 1 · 2022: 3
FWCI
0.65
Type
journal article
Language
en
Open access
Locations
  • Minerals (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Repositorio Institucional de la Universidad de Málaga (University of Málaga) (submittedVersion, cc-by-nc-nd)
Funders
  • Ministerio de Ciencia e Innovación (PID2019-104378RJ-I00)
  • Junta de Andalucía (P18-RT-720)
Topics
  • Physical Sciences › Engineering › Civil and Structural Engineering › Concrete and Cement Materials Research
  • Physical Sciences › Materials Science › Biomaterials › Calcium Carbonate Crystallization and Inhibition
  • Physical Sciences › Engineering › Building and Construction › Recycled Aggregate Concrete Performance
Keywords
cement carbonation, ettringite decomposition, aragonite, bassanite, gibbsite, amorphous calcium carbonate, calcium carbonate polymorphs, calcite, vaterite, calcium silicate hydrate, portlandite, tricalcium silicate, dicalcium silicate, ye'elimite, amorphous silica gel, nanocrystalline phase, pair distribution function, Rietveld refinement, thermal analysis, concrete durability

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (qwen3.8-omni-flash and gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: X-ray Total Scattering Study of Phases Formed from Cement Phases Carbonation. https://app.cochat.ai/papers/10.3390/min11050519
The paper
Cuesta, A., De la Torre, A. G., & Aranda, M. A. G. (2021). X-ray Total Scattering Study of Phases Formed from Cement Phases Carbonation. Minerals. https://doi.org/10.3390/min11050519

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.