The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Self-assembly of layered double hydroxide 2D nanoplates with graphene nanosheets: an effective way to improve the photocatalytic activity of 2D nanostructured materials for visible light-induced O2 generation
Abstract
Highly efficient photocatalysts for visible light-induced O2 generation are synthesized via an electrostatically derived self-assembly of Zn–Cr-LDH 2D nanoplates with graphene 2D nanosheets. In the obtained nanohybrids, the positively charged Zn–Cr-LDH nanoplates are immobilized on the surface of negatively charged graphene nanosheets with the formation of a highly porous stacked structure. A strong electronic coupling of the subnanometer-thick Zn–Cr-LDH nanoplates with reduced graphene oxide (RGO)/graphene oxide (GO) nanosheets gives rise not only to the prominent increase of visible light absorption but also to a remarkable depression of the photoluminescence signal. The self-assembled Zn–Cr-LDH–RGO nanohybrids display an unusually high photocatalytic activity for visible light-induced O2 generation with a rate of ∼1.20 mmol h−1 g−1, which is far superior to that of the pristine Zn–Cr-LDH material (∼0.67 mmol h−1 g−1). The fact that pristine Zn–Cr-LDH is one of the most effective visible light photocatalysts for O2 production with unusually high quantum efficiency of 61% at λ = 410 nm highlights the excellent functionality of the Zn–Cr-LDH–RGO nanohybrids as visible light active photocatalysts. The Zn–Cr-LDH–RGO nanohybrid shows a higher photocatalytic activity than the Zn–Cr-LDH–GO nanohybrid, providing strong evidence for the superior advantage of the hybridization with RGO. The present findings clearly demonstrate that graphene nanosheets can be used as an effective platform for improving the photocatalytic activity of 2D nanostructured inorganic solids.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Semiconductor-based Photocatalytic Hydrogen Generation
Chen, X., Shen, S., Guo, L., & Mao, S. S. (2010) · Chemical Reviews · doi:10.1021/cr1001645 · Cited by 7,876
Graphene-based semiconductor photocatalysts
Xiang, Q., Yu, J., & Jaroniec, M. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15172j · Cited by 2,730
Liu, J., Bai, H., Wang, Y., Liu, Z., Zhang, X., & Sun, D. D. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201001391 · Cited by 776
Cited by
Catalytic applications of layered double hydroxides: recent advances and perspectives
Fan, G., Li, F., Evans, D. G., & Duan, X. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00160e · Cited by 1,762
Graphene in Photocatalysis: A Review
Li, X., Yu, J., Wageh, S., Al‐Ghamdi, A. A., & Xie, J. (2016) · Small · doi:10.1002/smll.201600382 · Cited by 1,153
Waltzing with the Versatile Platform of Graphene to Synthesize Composite Photocatalysts
Zhang, N., Yang, M.-Q., Liu, S., Sun, Y., & Xu, Y.-J. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00267 · Cited by 1,135
Preparation of two dimensional layered double hydroxide nanosheets and their applications
Yu, J., Wang, Q., O'Hare, D., & Sun, L. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00318h · Cited by 924
Mohapatra, L., & Parida, K. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta01668e · Cited by 742
Li, H., Liu, J., Hou, W., Du, N., Zhang, R., & Tao, X. (2014) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.05.019 · Cited by 606
Transition metal based layered double hydroxides tailored for energy conversion and storage
Long, X., Wang, Z., Xiao, S., An, Y., & Yang, S. (2016) · Materials Today · doi:10.1016/j.mattod.2015.10.006 · Cited by 572
Tonda, S., Kumar, S., Bhardwaj, M., Yadav, P., & Ogale, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18835 · Cited by 556
Two-dimensional materials in semiconductor photoelectrocatalytic systems for water splitting
Faraji, M., Yousefi, M., Yousefzadeh, S., Zirak, M., Naseri, N., Jeon, T. H., Choi, W., & Moshfegh, A. Z. (2019) · Energy & Environmental Science · doi:10.1039/c8ee00886h · Cited by 540
Graphene-based heterojunction photocatalysts
Li, X., Shen, R., Ma, S., Chen, X., & Xie, J. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2017.08.194 · Cited by 494
Layered Double Hydroxide Nanostructured Photocatalysts for Renewable Energy Production
Zhao, Y., Jia, X., Waterhouse, G. I. N., Wu, L., Tung, C., O'Hare, D., & Zhang, T. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501974 · Cited by 484
Layered Double Hydroxide‐based Nanomaterials as Highly Efficient Catalysts and Adsorbents
Li, C., Wei, M., Evans, D. G., & Duan, X. (2014) · Small · doi:10.1002/smll.201401464 · Cited by 451
Yang, P., Ou, H., Fang, Y., & Wang, X. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201700286 · Cited by 442
Nayak, S., Swain, G., & Parida, K. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b06511 · Cited by 388
Li, Y., Zhang, L., Xiang, X., Yan, D., & Li, F. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01275e · Cited by 364
Functionalized layered double hydroxides for innovative applications
Laipan, M., Yu, J., Zhu, R., Zhu, J., Smith, A. T., He, H., O'Hare, D., & Sun, L. (2020) · Materials Horizons · doi:10.1039/c9mh01494b · Cited by 314
Xu, J., Gai, S., He, F., Niu, N., Gao, P., Chen, Y., & Yang, P. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14048b · Cited by 289
Nayak, S., & Parida, K. M. (2019) · Scientific Reports · doi:10.1038/s41598-019-39009-4 · Cited by 288
Zhao, Y., Li, B., Wang, Q., Gao, W., Wang, C. J., Wei, M., Evans, D. G., Duan, X., & O'Hare, D. (2014) · Chem. Sci. · doi:10.1039/c3sc52546e · Cited by 279
Tan, L., Wang, Y., Liu, Q., Wang, J., Jing, X., Liu, L., Liu, J., & Song, D. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.08.015 · Cited by 270
Dou, Y., Zhang, S., Pan, T., Xu, S., Zhou, A., Pu, M., Yan, H., Han, J., Wei, M., Evans, D. G., et al. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201404496 · Cited by 263
Metadata
- Authors
- Gunjakar, J. L., Kim, I. Y., Lee, J. M., Lee, N.-S., & Hwang, S.-J.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 6
- Issue
- 3
- Pages
- 1008
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W1963605673
- Cited by
- 242
- References
- 3
- FWCI
- 9.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.