The DOI matches its Crossref record.
Effects of catalyst material and atomic layer deposited TiO2 oxide thickness on the water oxidation performance of metal–insulator–silicon anodes
Abstract
We report on the effects on water oxidation performance of varying (1) the nanoscale TiO2 thickness and (2) the catalyst material in catalyst/TiO2/SiO2/Si anodes. Uniform films of atomic layer deposited TiO2 are prepared in the thickness range ∼1–12 nm on degenerately-doped p+-Si, yielding water oxidation overpotentials at 1 mA cm−2 of 300 mV to 600 mV in aqueous solution (pH 0 to 14). Electron/hole transport through Schottky tunnel junction structures of varying TiO2 thickness was studied using the reversible redox couple ferri/ferrocyanide. The dependence of the water oxidation overpotential on ALD-TiO2 thickness, with all other anode design features unchanged, exhibits a linear trend corresponding to ∼21 mV of added overpotential at 1 mA cm−2 per nanometer of TiO2 for TiO2 thicknesses greater than ∼2 nm. For thinner TiO2 layers, an approximately thickness-independent overpotential is observed. The linear behavior for anodes with thicker TiO2 layers is consistent with the predicted effect of bulk TiO2-limited electronic conduction on the voltage required to sustain the current density across the TiO2/SiO2 insulator stack. Eight different oxygen evolution catalysts of thickness 1–3 nm are studied. For the anodes investigated, 3 nm of Ir or Ru gave the best water oxidation performance, but both thinner layers and other catalysts can be quite effective, suggesting the potential for reduced materials cost. Lastly, a flat band voltage analysis of solid state thin film capacitors was done for five different gate metals on n-Si to probe junction energetics directly relevant to a photoanode. The results are consistent with a Schottky junction in which the Fermi level at the semiconductor surface is unpinned.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Amorphous TiO 2 coatings stabilize Si, GaAs, and GaP photoanodes for efficient water oxidation
Hu, S., Shaner, M. R., Beardslee, J. A., Lichterman, M., Brunschwig, B. S., & Lewis, N. S. (2014) · Science · doi:10.1126/science.1251428 · Cited by 1,317
Reier, T., Nong, H. N., Teschner, D., Schlögl, R., & Strasser, P. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601275 · Cited by 1,253
Catalyst Design with Atomic Layer Deposition
O’Neill, B. J., Jackson, D. H. K., Lee, J., Canlas, C., Stair, P. C., Marshall, C. L., Elam, J. W., Kuech, T. F., Dumesic, J. A., & Huber, G. W. (2015) · ACS Catalysis · doi:10.1021/cs501862h · Cited by 782
Recommended Methods to Study Resistive Switching Devices
Lanza, M., Wong, H. ‐. P., Pop, E., Ielmini, D., Strukov, D., Regan, B. C., Larcher, L., Villena, M. A., Yang, J. J., Goux, L., et al. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800143 · Cited by 674
Strategies for stable water splitting via protected photoelectrodes
Bae, D., Seger, B., Vesborg, P. C. K., Hansen, O., & Chorkendorff, I. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00918b · Cited by 572
Photocatalysis fundamentals and surface modification of TiO2 nanomaterials
Wen, J., Li, X., Liu, W., Fang, Y., Xie, J., & Xu, Y. (2015) · Chinese Journal of Catalysis · doi:10.1016/s1872-2067(15)60999-8 · Cited by 552
Enabling Silicon for Solar-Fuel Production
Sun, K., Shen, S., Liang, Y., Burrows, P. E., Mao, S. S., & Wang, D. (2014) · Chemical Reviews · doi:10.1021/cr300459q · Cited by 393
Lu, J., Elam, J. W., & Stair, P. C. (2016) · Surface Science Reports · doi:10.1016/j.surfrep.2016.03.003 · Cited by 322
Electrocatalysts for the Oxygen Evolution Reaction in Acidic Media
Lin, Y., Dong, Y., Wang, X., & Chen, L. (2023) · Advanced Materials · doi:10.1002/adma.202210565 · Cited by 318
Electrified water treatment: fundamentals and roles of electrode materials
Zuo, K., Garcia-Segura, S., Cerrón-Calle, G. A., Chen, F.-Y., Tian, X., Wang, X., Huang, X., Wang, H., Alvarez, P. J. J., Lou, J., et al. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00564-y · Cited by 308
Thin-Film Materials for the Protection of Semiconducting Photoelectrodes in Solar-Fuel Generators
Hu, S., Lewis, N. S., Ager, J. W., Yang, J., McKone, J. R., & Strandwitz, N. C. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b05976 · Cited by 290
Design principles for maximizing photovoltage in metal-oxide-protected water-splitting photoanodes
Scheuermann, A. G., Lawrence, J. P., Kemp, K. W., Ito, T., Walsh, A., Chidsey, C. E. D., Hurley, P. K., & McIntyre, P. C. (2016) · Nature Materials · doi:10.1038/nmat4451 · Cited by 269
Self-citationReier, T., Teschner, D., Lunkenbein, T., Bergmann, A., Selve, S., Kraehnert, R., Schlögl, R., & Strasser, P. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0411409jes · Cited by 263
Ros, C., Andreu, T., & Morante, J. R. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta02755c · Cited by 260
Lee, D., Kim, Y., Han, H., Kim, W. B., Chang, H., Chung, T.-M., Han, J. H., Kim, H. W., & Kim, H. J. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta02509g · Cited by 30
Metadata
- Authors
- Scheuermann, A. G., Prange, J. D., Gunji, M., Chidsey, C. E. D., & McIntyre, P. C.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 6
- Issue
- 8
- Pages
- 2487
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W1981727971
- Cited by
- 185
- References
- 0
- FWCI
- 6.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.