The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Selective aqueous phase oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid over Pt/C catalysts: influence of the base and effect of bismuth promotion
Abstract
5-Hydroxymethylfurfural (HMF) was quantitatively oxidized to 2,5-furandicarboxylic acid (FDCA) at 100 °C under 40 bar air in moderately basic aqueous solution in the presence of active carbon supported platinum and bismuth–platinum catalysts. The transformation of HMF into FDCA proceeded via the 5-hydroxymethyl-2-furancarboxylic acid (HMFCA) and 2,5-diformylfuran (DFF) intermediates; both of these were very reactive and rapidly oxidized to 5-formylfurancarboxylic acid (FFCA), the subsequent oxidation of which was found to be the rate-limiting step. The preparation method of the platinum catalysts influenced the particle size of metallic platinum and modified the surface of the support, therefore determining the activity. The addition of a carbonate base (Na2CO3/HMF molar ratio = 2) led to faster overall conversion than bicarbonate (NaHCO3/HMF = 4) by maintaining an appropriate pH for the oxidation reaction. The ex situ or in situ addition of a bismuth promoter still accelerated the reaction; the highest activity was observed for a Bi/Pt molar ratio of ca. 0.2. Furthermore, the promoter helped to prevent some deactivation of the Pt catalyst upon recycling experiments. Quantitative conversion of HMF (0.1 M) and >99% yield of FDCA were achieved using a molar ratio of HMF to Pt of 100 and Na2CO3 as the homogeneous base in less than 2 h.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis of Transportation Fuels from Biomass: Chemistry, Catalysts, and Engineering
Huber, G. W., Iborra, S., & Corma, A. (2006) · Chemical Reviews · doi:10.1021/cr068360d · Cited by 7,664
Hydroxymethylfurfural, A Versatile Platform Chemical Made from Renewable Resources
van Putten, R.-J., van der Waal, J. C., de Jong, E., Rasrendra, C. B., Heeres, H. J., & de Vries, J. G. (2013) · Chemical Reviews · doi:10.1021/cr300182k · Cited by 2,886
Conversion of biomass to selected chemical products
Gallezot, P. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15147a · Cited by 2,552
Oxidation of Alcohols with Molecular Oxygen on Solid Catalysts
Mallat, T., & Baiker, A. (2004) · Chemical Reviews · doi:10.1021/cr0200116 · Cited by 2,040
Rosatella, A. A., Simeonov, S. P., Frade, R. F. M., & Afonso, C. A. M. (2011) · Green Chemistry · doi:10.1039/c0gc00401d · Cited by 1,652
Reactivity of the Gold/Water Interface During Selective Oxidation Catalysis
Zope, B. N., Hibbitts, D. D., Neurock, M., & Davis, R. J. (2010) · Science · doi:10.1126/science.1195055 · Cited by 1,088
Biomass into chemicals: Conversion of sugars to furan derivatives by catalytic processes
Tong, X., Ma, Y., & Li, Y. (2010) · Applied Catalysis A: General · doi:10.1016/j.apcata.2010.06.049 · Cited by 847
Replacing fossil based PET with biobased PEF; process analysis, energy and GHG balance
Eerhart, A. J. J. E., Faaij, A. P. C., & Patel, M. K. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02480b · Cited by 666
Selective oxidation of alcohols and aldehydes on metal catalysts
Besson, M., & Gallezot, P. (2000) · Catalysis Today · doi:10.1016/s0920-5861(99)00315-6 · Cited by 654
Self-citationMoreau, C., Belgacem, M. N., & Gandini, A. (2004) · Topics in Catalysis · doi:10.1023/b:toca.0000013537.13540.0e · Cited by 589
Cited by
Xu, C., Paone, E., Rodríguez-Padrón, D., Luque, R., & Mauriello, F. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00041h · Cited by 1,042
Alternative Monomers Based on Lignocellulose and Their Use for Polymer Production
Delidovich, I., Hausoul, P. J. C., Deng, L., Pfützenreuter, R., Rose, M., & Palkovits, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00354 · Cited by 773
Sajid, M., Zhao, X., & Liu, D. (2018) · Green Chemistry · doi:10.1039/c8gc02680g · Cited by 728
Sousa, A. F., Vilela, C., Fonseca, A. C., Matos, M., Freire, C. S. R., Gruter, G.-J. M., Coelho, J. F. J., & Silvestre, A. J. D. (2015) · Polymer Chemistry · doi:10.1039/c5py00686d · Cited by 700
Catalytic oxidation of carbohydrates into organic acids and furan chemicals
Zhang, Z., & Huber, G. W. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00213k · Cited by 689
Recent Advances in the Catalytic Synthesis of 2,5-Furandicarboxylic Acid and Its Derivatives
Zhang, Z., & Deng, K. (2015) · ACS Catalysis · doi:10.1021/acscatal.5b01491 · Cited by 641
An overview of biorefinery derived platform chemicals from a cellulose and hemicellulose biorefinery
Takkellapati, S., Li, T., & Gonzalez, M. A. (2018) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-018-1568-5 · Cited by 526
Electrocatalytic Oxidation of 5‐(Hydroxymethyl)furfural Using High‐Surface‐Area Nickel Boride
Barwe, S., Weidner, J., Cychy, S., Morales, D. M., Dieckhöfer, S., Hiltrop, D., Masa, J., Muhler, M., & Schuhmann, W. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201806298 · Cited by 507
Hayashi, E., Yamaguchi, Y., Kamata, K., Tsunoda, N., Kumagai, Y., Oba, F., & Hara, M. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b09917 · Cited by 483
Wan, X., Zhou, C., Chen, J., Deng, W., Zhang, Q., Yang, Y., & Wang, Y. (2014) · ACS Catalysis · doi:10.1021/cs5003096 · Cited by 423
Chadderdon, D. J., Xin, L., Qi, J., Qiu, Y., Krishna, P., More, K. L., & Li, W. (2014) · Green Chem. · doi:10.1039/c4gc00401a · Cited by 333
Catalytic conversion of 5-hydroxymethylfurfural to some value-added derivatives
Kong, X., Zhu, Y., Fang, Z., Kozinski, J. A., Butler, I. S., Xu, L., Song, H., & Wei, X. (2018) · Green Chemistry · doi:10.1039/c8gc00234g · Cited by 306
Chen, C., Wang, L., Zhu, B., Zhou, Z., El-Hout, S. I., Yang, J., & Zhang, J. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.05.068 · Cited by 290
Bio-derived materials as a green route for precious & critical metal recovery and re-use
Dodson, J. R., Parker, H. L., Muñoz García, A., Hicken, A., Asemave, K., Farmer, T. J., He, H., Clark, J. H., & Hunt, A. J. (2015) · Green Chemistry · doi:10.1039/c4gc02483d · Cited by 278
Base-free conversion of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid over a Ru/C catalyst
Yi, G., Teong, S. P., & Zhang, Y. (2016) · Green Chemistry · doi:10.1039/c5gc01584g · Cited by 262
Zhang, Z., Zhen, J., Liu, B., Lv, K., & Deng, K. (2015) · Green Chemistry · doi:10.1039/c4gc01833h · Cited by 261
Recent advances in catalytic conversion of biomass to 5-hydroxymethylfurfural and 2, 5-dimethylfuran
Wang, H., Zhu, C., Li, D., Liu, Q., Tan, J., Wang, C., Cai, C., & Ma, L. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.12.010 · Cited by 261
Polymers without Petrochemicals: Sustainable Routes to Conventional Monomers
Hayes, G., Laurel, M., MacKinnon, D., Zhao, T., Houck, H. A., & Becer, C. R. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00354 · Cited by 253
Metadata
- Authors
- Ait Rass, H., Essayem, N., & Besson, M.
- Venue
- Green Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 15
- Issue
- 8
- Pages
- 2240
- ISSN
- 1463-9262 (ISSN-L)
- 1463-9270
- OpenAlex
- W2164618305
- Cited by
- 254
- References
- 50
- FWCI
- 10.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.