The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Highly conductive three-dimensional MnO2–carbon nanotube–graphene–Ni hybrid foam as a binder-free supercapacitor electrode
Abstract
Carbon nanotube (CNT)-graphene hybrids grown on porous Ni foam are used as substrates to immobilize MnO2 nanoflakes, thus forming three-dimensional (3D) MnO2-CNT-graphene-Ni hybrid foam. The as-prepared hybrid materials could be used as supercapacitor electrodes directly without any binder and conductive additives, and fully maintain the high conductivity and high surface-to-volume ratio of CNTs, large pseudocapacitance of MnO2 nanoflakes and high porosity provided by the framework of Ni foam. The conductivity of the 3D MnO2-CNT-graphene-Ni foam is as high as 117 S cm(-1) due to the seamless integration of MnO2 nanoflakes, CNTs, graphene and Ni foam among the 3D frameworks, which guarantee its low internal resistance (1.25 ohm) when compacted into supercapacitor devices. In aqueous electrolytes, the 3D MnO2-CNT-graphene-Ni based prototype supercapacitors show specific capacitances of ~251 F g(-1) with good cycling stability at a current density of 1.0 A g(-1). In addition, these 3D hybrids also demonstrate their potential in all-solid-state flexible supercapacitors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chen, Z., Ren, W., Gao, L., Liu, B., Pei, S., & Cheng, H.-M. (2011) · Nature Materials · doi:10.1038/nmat3001 · Cited by 3,834
Manganese oxide-based materials as electrochemical supercapacitor electrodes
Wei, W., Cui, X., Chen, W., & Ivey, D. G. (2011) · Chem. Soc. Rev. · doi:10.1039/c0cs00127a · Cited by 2,455
Nanoporous metal/oxide hybrid electrodes for electrochemical supercapacitors
Lang, X., Hirata, A., Fujita, T., & Chen, M. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.13 · Cited by 2,109
Fan, Z., Yan, J., Wei, T., Zhi, L., Ning, G., Li, T., & Wei, F. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100058 · Cited by 1,993
High-Energy MnO2 Nanowire/Graphene and Graphene Asymmetric Electrochemical Capacitors
Wu, Z.-S., Ren, W., Wang, D.-W., Li, F., Liu, B., & Cheng, H.-M. (2010) · ACS Nano · doi:10.1021/nn101754k · Cited by 1,517
He, Y., Chen, W., Li, X., Zhang, Z., Fu, J., Zhao, C., & Xie, E. (2013) · ACS Nano · doi:10.1021/nn304833s · Cited by 1,427
Fast and reversible surface redox reaction of graphene–MnO2 composites as supercapacitor electrodes
Yan, J., Fan, Z., Wei, T., Qian, W., Zhang, M., & Wei, F. (2010) · Carbon · doi:10.1016/j.carbon.2010.06.047 · Cited by 1,403
Liu, J., Jiang, J., Cheng, C., Li, H., Zhang, J., Gong, H., & Fan, H. J. (2011) · Advanced Materials · doi:10.1002/adma.201100058 · Cited by 1,311
Yu, G., Hu, L., Vosgueritchian, M., Wang, H., Xie, X., McDonough, J. R., Cui, X., Cui, Y., & Bao, Z. (2011) · Nano Letters · doi:10.1021/nl2013828 · Cited by 1,239
Yu, G., Hu, L., Liu, N., Wang, H., Vosgueritchian, M., Yang, Y., Cui, Y., & Bao, Z. (2011) · Nano Letters · doi:10.1021/nl2026635 · Cited by 1,142
Cited by
Towards flexible solid-state supercapacitors for smart and wearable electronics
Dubal, D. P., Chodankar, N. R., Kim, D.-H., & Gomez-Romero, P. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00505a · Cited by 1,725
Shen, L., Yu, L., Wu, H. B., Yu, X.-Y., Zhang, X., & Lou, X. W. (2015) · Nature Communications · doi:10.1038/ncomms7694 · Cited by 1,272
Kumar, S., Saeed, G., Zhu, L., Hui, K. N., Kim, N. H., & Lee, J. H. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126352 · Cited by 1,152
Punetha, V. D., Rana, S., Yoo, H. J., Chaurasia, A., McLeskey, J. T., Ramasamy, M. S., Sahoo, N. G., & Cho, J. W. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.12.010 · Cited by 656
Flexible supercapacitors based on paper substrates: a new paradigm for low-cost energy storage
Zhang, Y.-Z., Wang, Y., Cheng, T., Lai, W.-Y., Pang, H., & Huang, W. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00174a · Cited by 638
Self-citationLiu, J., Zhang, L., Wu, H. B., Lin, J., Shen, Z., & Lou, X. W. (. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01475h · Cited by 583
Flexible electrodes and supercapacitors for wearable energy storage: a review by category
Dong, L., Xu, C., Li, Y., Huang, Z.-H., Kang, F., Yang, Q.-H., & Zhao, X. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta10582j · Cited by 575
Engineering of MnO2-based nanocomposites for high-performance supercapacitors
Wang, J.-G., Kang, F., & Wei, B. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.04.003 · Cited by 568
Printed supercapacitors: materials, printing and applications
Zhang, Y.-Z., Wang, Y., Cheng, T., Yao, L.-Q., Li, X., Lai, W.-Y., & Huang, W. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00819h · Cited by 497
Self-citationGraphene-based macroscopic assemblies and architectures: an emerging material system
Cong, H.-P., Chen, J.-F., & Yu, S.-H. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00181h · Cited by 461
Self-citationCharacterization of MoS2–Graphene Composites for High-Performance Coin Cell Supercapacitors
Bissett, M. A., Kinloch, I. A., & Dryfe, R. A. W. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04672 · Cited by 461
Ultralight covalent organic framework/graphene aerogels with hierarchical porosity
Li, C., Yang, J., Pachfule, P., Li, S., Ye, M.-Y., Schmidt, J., & Thomas, A. (2020) · Nature Communications · doi:10.1038/s41467-020-18427-3 · Cited by 390
Flexible graphene devices related to energy conversion and storage
Wang, X., & Shi, G. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03685a · Cited by 373
Tailoring the Oxygen Content of Graphite and Reduced Graphene Oxide for Specific Applications
Morimoto, N., Kubo, T., & Nishina, Y. (2016) · Scientific Reports · doi:10.1038/srep21715 · Cited by 360
Research Progress in MnO2–Carbon Based Supercapacitor Electrode Materials
Zhang, Q., Zhang, D., Miao, Z., Zhang, X., & Chou, S. (2018) · Small · doi:10.1002/smll.201702883 · Cited by 345
Carbon Nanomaterials in Different Dimensions for Electrochemical Energy Storage
Ni, J., & Li, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600278 · Cited by 304
Carbon-Based Polymer Nanocomposite for High-Performance Energy Storage Applications
Siwal, S. S., Zhang, Q., Devi, N., & Thakur, V. K. (2020) · Polymers · doi:10.3390/polym12030505 · Cited by 289
Zhou, A., Liu, Y., Li, S., Wang, X., Ying, G., Xia, Q., & Zhang, P. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0535-5 · Cited by 275
Graphene-based materials with tailored nanostructures for energy conversion and storage
Yang, Y., Han, C., Jiang, B., Iocozzia, J., He, C., Shi, D., Jiang, T., & Lin, Z. (2016) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2015.12.003 · Cited by 273
Zhang, Z., Xiao, F., & Wang, S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02331a · Cited by 254
Integrated Energy Aerogel of N,S-rGO/WSe 2 /NiFe-LDH for Both Energy Conversion and Storage
Xu, X., Chu, H., Zhang, Z., Dong, P., Baines, R., Ajayan, P. M., Shen, J., & Ye, M. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09866 · Cited by 77
Metadata
- Authors
- Zhu, G., He, Z., Chen, J., Zhao, J., Feng, X., Ma, Y., Fan, Q., Wang, L., & Huang, W.
- Venue
- Nanoscale
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 6
- Issue
- 2
- Pages
- 1079-1085
- ISSN
- 2040-3364 (ISSN-L)
- 2040-3372
- OpenAlex
- W2007584259
- Cited by
- 338
- References
- 27
- FWCI
- 13.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.