The DOI matches its Crossref record.
Facile synthesis of nitrogen-doped porous carbon for supercapacitors
Abstract
A very simple, activation-free method for preparing nitrogen-doped porous carbon with high surface area for supercapacitors by direct pyrolysis of a nitrogen-containing organic salt, ethylenediamine tetraacetic acid (EDTA) disodium magnesium salt, in an inert atmosphere is presented. As the pyrolysis temperature increases from 500 to 900 °C, both the BET surface area and pore volume of the disodium magnesium EDTA-derived carbons increase and reach up to 1811 m2 g−1 and 1.16 cm3 g−1, respectively, while the nitrogen content decreases from 11.14 at.% to 1.13 at.%. The carbon obtained at a moderate pyrolysis temperature of 700 °C possesses a balanced surface area (1258 m2 g−1) and nitrogen content (5.43 at.%), exhibits high capacitance (281 F g−1), good rate capability (196 F g−1 at 20 A g−1) and cycle durability in 6 mol L−1 KOH aqueous electrolytes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Carbons and Electrolytes for Advanced Supercapacitors
Béguin, F., Presser, V., Balducci, A., & Frackowiak, E. (2014) · Advanced Materials · doi:10.1002/adma.201304137 · Cited by 2,686
Deng, Y., Xie, Y., Zou, K., & Ji, X. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08620e · Cited by 997
Synthesis Strategies of Porous Carbon for Supercapacitor Applications
Yin, J., Zhang, W., Alhebshi, N. A., Salah, N., & Alshareef, H. N. (2020) · Small Methods · doi:10.1002/smtd.201900853 · Cited by 671
Nanostructured materials on 3D nickel foam as electrocatalysts for water splitting
Chaudhari, N. K., Jin, H., Kim, B., & Lee, K. (2017) · Nanoscale · doi:10.1039/c7nr04187j · Cited by 585
Tahir, M., Cao, C., Mahmood, N., Butt, F. K., Mahmood, A., Idrees, F., Hussain, S., Tanveer, M., Ali, Z., & Aslam, I. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am405076b · Cited by 422
Dong, Y., Zhang, S., Du, X., Hong, S., Zhao, S., Chen, Y., Chen, X., & Song, H. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901127 · Cited by 394
More Sustainable Chemical Activation Strategies for the Production of Porous Carbons
Sevilla, M., Díez, N., & Fuertes, A. B. (2021) · ChemSusChem · doi:10.1002/cssc.202001838 · Cited by 371
Shangguan, W., Liu, Q., Wang, Y., Sun, N., Liu, Y., Zhao, R., Li, Y., Wang, C., & Zhao, J. (2022) · Nature Communications · doi:10.1038/s41467-022-31474-2 · Cited by 332
Zhu, Q., Li, J., Simon, P., & Xu, B. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.11.035 · Cited by 318
Self-citationWei, X., Jiang, X., Wei, J., & Gao, S. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02336 · Cited by 276
Tubular graphitic-C3N4: a prospective material for energy storage and green photocatalysis
Tahir, M., Cao, C., Butt, F. K., Idrees, F., Mahmood, N., Ali, Z., Aslam, I., Tanveer, M., Rizwan, M., & Mahmood, T. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta13291a · Cited by 269
Metadata
- Authors
- Xu, B., Duan, H., Chu, M., Cao, G., & Yang, Y.
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 14
- Pages
- 4565
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2120003234
- Cited by
- 222
- References
- 0
- FWCI
- 9.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.