The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Superhydrophobic polymer-coated copper-mesh; membranes for highly efficient oil–water separation
Abstract
A novel filtration system has been developed for the separation of water and hydrophobic solvents. Copper meshes of various pore diameter (297, 251, 178 and 152 μm) were coated with extremely rough silicone elastomer films. Depositions of this polymer were carried out by aerosol assisted chemical vapour deposition. The polymer coating rendered all meshes superhydrophobic, with static water contact angles of 152–167° depending on mesh diameter. The meshes were found to be exceptionally efficient in separating organic solvents (hexane, petroleum ether and toluene) from water. The dual-layered filtration system developed focuses on directing the transport of oil away from water with the highest efficiency. The device provides a scalable solution to many challenges, including microanalysis, filtration and chemical processing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Li, X.-M., Reinhoudt, D., & Crego-Calama, M. (2007) · Chemical Society Reviews · doi:10.1039/b602486f · Cited by 2,079
Bioinspired Surfaces with Special Wettability
Sun, T., Feng, L., Gao, X., & Jiang, L. (2005) · Accounts of Chemical Research · doi:10.1021/ar040224c · Cited by 2,044
Design and Creation of Superwetting/Antiwetting Surfaces
Feng, X. J., & Jiang, L. (2006) · Advanced Materials · doi:10.1002/adma.200501961 · Cited by 2,030
Progess in superhydrophobic surface development
Roach, P., Shirtcliffe, N. J., & Newton, M. I. (2008) · Soft Matter · doi:10.1039/b712575p · Cited by 1,615
Superhydrophobic surfaces: From natural to biomimetic to functional
Guo, Z., Liu, W., & Su, B.-L. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.08.047 · Cited by 974
Artificial Lotus Leaf by Nanocasting
Sun, M., Luo, C., Xu, L., Ji, H., Ouyang, Q., Yu, D., & Chen, Y. (2005) · Langmuir · doi:10.1021/la050316q · Cited by 687
Electrospun Porous Structure Fibrous Film with High Oil Adsorption Capacity
Wu, J., Wang, N., Wang, L., Dong, H., Zhao, Y., & Jiang, L. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am300544d · Cited by 446
Remarkably Simple Fabrication of Superhydrophobic Surfaces Using Electroless Galvanic Deposition
Larmour, I. A., Bell, S. E. J., & Saunders, G. C. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604596 · Cited by 404
A Super‐Hydrophobic and Super‐Oleophilic Coating Mesh Film for the Separation of Oil and Water
Feng, L., Zhang, Z., Mai, Z., Ma, Y., Liu, B., Jiang, L., & Zhu, D. (2004) · Angewandte Chemie · doi:10.1002/ange.200353381 · Cited by 361
Preparation and Characterisation of Super‐Hydrophobic Surfaces
Crick, C. R., & Parkin, I. P. (2010) · Chemistry – A European Journal · doi:10.1002/chem.200903335 · Cited by 326
Self-citationSeparating small amount of water and hydrophobic solvents by novel superhydrophobic copper meshes
Pan, Q., Wang, M., & Wang, H. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.03.034 · Cited by 209
Yang, H., Pi, P., Cai, Z.-Q., Wen, X., Wang, X., Cheng, J., & Yang, Z.-R. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.01.090 · Cited by 202
Crick, C. R., Bear, J. C., Kafizas, A., & Parkin, I. P. (2012) · Advanced Materials · doi:10.1002/adma.201201239 · Cited by 179
Self-citationPreparation and sorption studies of polyester microsphere copolymers containing β-Cyclodextrin
Wilson, L. D., & Guo, R. X. (2012) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2012.07.092 · Cited by 27
Pan, Q., Wang, M., & Chen, W. (2007) · Chemistry Letters · doi:10.1246/cl.2007.1312 · Cited by 18
Cited by
Wang, B., Liang, W., Guo, Z., & Liu, W. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00220b · Cited by 1,574
Oil/Water Separation with Selective Superantiwetting/Superwetting Surface Materials
Chu, Z., Feng, Y., & Seeger, S. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201405785 · Cited by 1,305
Oil/water separation techniques: a review of recent progresses and future directions
Gupta, R. K., Dunderdale, G. J., England, M. W., & Hozumi, A. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02070h · Cited by 1,128
Advanced Sorbents for Oil‐Spill Cleanup: Recent Advances and Future Perspectives
Ge, J., Zhao, H., Zhu, H., Huang, J., Shi, L., & Yu, S. (2016) · Advanced Materials · doi:10.1002/adma.201601812 · Cited by 714
Separation Mechanism and Construction of Surfaces with Special Wettability for Oil/Water Separation
Chen, C., Weng, D., Mahmood, A., Chen, S., & Wang, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b01293 · Cited by 697
Metadata
- Authors
- Crick, C. R., Gibbins, J. A., & Parkin, I. P.
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 19
- Pages
- 5943
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2020121493
- Cited by
- 325
- References
- 17
- FWCI
- 11.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.