Enhancement of CO2 adsorption and amine efficiency of titania modified by moderate loading of diethylenetriamine
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
High-surface-area titanium oxides synthesized using an octylamine template were modified with diethylenetriamine (DETA) by a wet impregnation method for CO2 adsorption. These new composite sorbents were characterized by powder X-ray diffraction, transmission electron microscope, nitrogen adsorption, Fourier transform infrared spectroscopy and thermogravimetric analysis. CO2 capture performances of the adsorbents were tested in a fixed-bed reactor equipped with an on-line mass spectrometer. Experimental results revealed that titania with 30 wt% DETA loading exhibited a high CO2 adsorption capacity of 2.30 mmol g−1 under the conditions of 10.0% (v/v) CO2 in N2 at 75 °C, which is higher than analogue DETA impregnated SBA-15, and the recently reported DETA-impregnated materials. The high adsorption capacity is possibly due to the synergy between the guest DETA and the porous TiO2 supports in the adsorption of CO2. It was also found that at low temperatures, adsorbents with moderate DETA contents are more capable than their higher-loaded counterparts, possibly due to the increased dispersion of amine sites and the strong and productive interactions between the DETA and surface of Ti oxide. Cyclic CO2 adsorption–desorption tests demonstrated that with moderate amine loading, the titania-based sorbent is regenerable and stable.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
Cited by
Enhanced CO2 Capture Capacity of Nitrogen-Doped Biomass-Derived Porous Carbons
Chen, J., Yang, J., Hu, G., Hu, X., Li, Z., Shen, S., Radosz, M., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01425 · Cited by 419
Self-citationCO2 adsorption at nitrogen-doped carbons prepared by K2CO3 activation of urea-modified coconut shell
Yue, L., Xia, Q., Wang, L., Wang, L., DaCosta, H., Yang, J., & Hu, X. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.09.040 · Cited by 364
Self-citationZhang, Y., Liu, L., Zhang, P., Wang, J., Xu, M., Deng, Q., Zeng, Z., & Deng, S. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.08.169 · Cited by 261
Rao, L., Liu, S., Wang, L., Ma, C., Wu, J., An, L., & Hu, X. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.065 · Cited by 254
Self-citationYang, M., Guo, L., Hu, G., Hu, X., Xu, L., Chen, J., Dai, W., & Fan, M. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b01311 · Cited by 193
Self-citation
Metadata
- Authors
- Zhao, X., Hu, X., Hu, G., Bai, R., Dai, W., Fan, M., & Luo, M.
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 20
- Pages
- 6208
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2093396192
- Cited by
- 73
- References
- 2
- FWCI
- 9.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.