The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Ultra-high surface area and nitrogen-rich porous carbons prepared by a low-temperature activation method with superior gas selective adsorption and outstanding supercapacitance performance
Abstract
Abstract Ultra-high surface area and nitrogen-rich porous carbons are prepared via a low-temperature and one-pot N-doping method. The obtained carbons exhibited large surface area of 2965.7 m2 g−1 and high N-doping level of 6.6 at%, endowing them as efficient gas-mixture selective adsorbents and excellent supercapacitor electrodes. By optimizing the ratio of porogen/carbon or activation temperature, the as-prepared N-rich microporous carbons possessed outstanding mixed-gas selectivities of CO2/N2 (77.9), CO2/CH4 (12.8), and CH4/N2 (4.9) at 298 K and 1 bar. Furthermore, three samples with almost identical surface properties were successfully prepared by judicious selection of activation conditions, thus the favorable effect of pyrrole/pyridine (N-5) species on gas-mixture separation could be clearly demonstrated. Moreover, as supercapacitor electrodes, the N-doped materials displayed extremely high supercapacitance of 350.2 F g−1 at a current density of 0.5 A g−1 in a 6 M KOH electrolyte solution with superior rate retention of 74.2% at 10 A g−1 and 98% capacitance retention after 8000 cycles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Where do batteries end and supercapacitors begin?
Simon, P., Gogotsi, Y., & Dunn, B. (2014) · Science · doi:10.1126/science.1249625 · Cited by 5,634
Wei, J., Zhou, D., Sun, Z., Deng, Y., Xia, Y., & Zhao, D. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202764 · Cited by 931
Nitrogen-doped carbon materials
Inagaki, M., Toyoda, M., Soneda, Y., & Morishita, T. (2018) · Carbon · doi:10.1016/j.carbon.2018.02.024 · Cited by 867
Wang, R., Wang, P., Yan, X., Lang, J., Peng, C., & Xue, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am302077c · Cited by 475
Balahmar, N., Mitchell, A. C., & Mokaya, R. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500867 · Cited by 177
Activated carbons prepared from peanut shell and sunflower seed shell for high CO2 adsorption
Deng, S., Hu, B., Chen, T., Wang, B., Huang, J., Wang, Y., & Yu, G. (2015) · Adsorption · doi:10.1007/s10450-015-9655-y · Cited by 159
Self-citation
Cited by
Petrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
Recent advances in carbon-based supercapacitors
Miao, L., Song, Z., Zhu, D., Li, L., Gan, L., & Liu, M. (2020) · Materials Advances · doi:10.1039/d0ma00384k · Cited by 340
Separation and Purification of Hydrocarbons with Porous Materials
Wu, Y., & Weckhuysen, B. M. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202104318 · Cited by 284
Metadata
- Authors
- Zhang, Y., Liu, L., Zhang, P., Wang, J., Xu, M., Deng, Q., Zeng, Z., & Deng, S.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 355
- Pages
- 309-319
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2888205291
- Cited by
- 261
- References
- 6
- FWCI
- 6.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Ultra-high surface area and nitrogen-rich porous carbons prepared by a low-temperature activation method with superior gas selective adsorption and outstanding supercapacitance performance. https://app.cochat.ai/papers/10.1016/j.cej.2018.08.169
- The paper
- Zhang, Y., Liu, L., Zhang, P., Wang, J., Xu, M., Deng, Q., Zeng, Z., & Deng, S. (2019). Ultra-high surface area and nitrogen-rich porous carbons prepared by a low-temperature activation method with superior gas selective adsorption and outstanding supercapacitance performance. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2018.08.169
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.