The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Comprehensive investigation of CO2 adsorption on Mg–Al–CO3 LDH-derived mixed metal oxides
Abstract
Layered double hydroxides (LDHs) have been intensively studied for high-temperature CO2 capture. However, big differences in the CO2 capture capacity, ranging from 0.28 to 0.6 mmol g−1, have often been reported for the same Mg–Al–CO3 LDH. Furthermore, how the active Mg–O species that are responsible for CO2 adsorption are formed is still unclear. In this work, we have performed a comprehensive investigation on the CO2 adsorption characteristics of Mg–Al–CO3 LDH-derived mixed metal oxides. Based on these results we proposed the possible adsorption sites and the mechanisms for CO2 adsorption. Initially, the effects of synthesis method, Mg : Al ratio, pretreatment conditions, adsorption conditions, and thermal stability on the CO2 adsorption capacity were systematically studied. By carefully examining the structural changes during thermal treatment using X-ray diffraction and solid state NMR, we suggest that the active Mg–O species could be induced either by the substitution of Mg2+ by Al3+ in the periclase MgO lattice, or by the diffusion of Al3+ out of the octahedral brucite layers. This work not only suggests the optimal testing conditions for LDH-derived CO2 adsorbents, but also provides a clearer understanding of the CO2 adsorption sites and mechanisms on LDH-derived mixed oxides and sheds light on the synthesis and utilization of LDH-derived high-temperature CO2 adsorption materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
Self-citation
Cited by
Industrial carbon dioxide capture and utilization: state of the art and future challenges
Gao, W., Liang, S., Wang, R., Jiang, Q., Zhang, Y., Zheng, Q., Xie, B., Toe, C. Y., Zhu, X., Wang, J., et al. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00025f · Cited by 1,388
Self-citationRecent advances in solid sorbents for CO2capture and new development trends
Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D., & Zhong, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01647e · Cited by 1,168
Self-citationLayered Double Hydroxide‐based Nanomaterials as Highly Efficient Catalysts and Adsorbents
Li, C., Wei, M., Evans, D. G., & Duan, X. (2014) · Small · doi:10.1002/smll.201401464 · Cited by 451
Review of pre-combustion capture and ionic liquid in carbon capture and storage
Theo, W. L., Lim, J. S., Hashim, H., Mustaffa, A. A., & Ho, W. S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.09.103 · Cited by 396
Trends in Solid Adsorbent Materials Development for CO 2 Capture
Pardakhti, M., Jafari, T., Tobin, Z., Dutta, B., Moharreri, E., Shemshaki, N. S., Suib, S., & Srivastava, R. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b08487 · Cited by 357
Metadata
- Authors
- Gao, Y., Zhang, Z., Wu, J., Yi, X., Zheng, A., Umar, A., O'Hare, D., & Wang, Q.
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2013
- Volume
- 1
- Issue
- 41
- Pages
- 12782
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2017304885
- Cited by
- 210
- References
- 2
- FWCI
- 14.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Comprehensive investigation of CO2 adsorption on Mg–Al–CO3 LDH-derived mixed metal oxides. https://app.cochat.ai/papers/10.1039/c3ta13039h
- The paper
- Gao, Y., Zhang, Z., Wu, J., Yi, X., Zheng, A., Umar, A., O'Hare, D., & Wang, Q. (2013). Comprehensive investigation of CO2 adsorption on Mg–Al–CO3 LDH-derived mixed metal oxides. Journal of Materials Chemistry A. https://doi.org/10.1039/c3ta13039h
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.