The DOI matches its Crossref record.
Print your own membrane: direct rapid prototyping of polydimethylsiloxane
Abstract
Polydimethylsiloxane is a translucent and biologically inert silicone material used in sealants, biomedical implants and microscale lab-on-a-chip devices. Furthermore, in membrane technology, polydimethylsiloxane represents a material for separation barriers as it has high permeabilities for various gases. The facile handling of two component formulations with a silicone base material, a catalyst and a small molecular weight crosslinker makes it widely applicable for soft-lithographic replication of two-dimensional device geometries, such as microfluidic chips or micro-contact stamps. Here, we develop a new technique to directly print polydimethylsiloxane in a rapid prototyping device, circumventing the need for masks or sacrificial mold production. We create a three-dimensional polydimethylsiloxane membrane for gas-liquid-contacting based on a Schwarz-P triple-periodic minimal-surface, which is inaccessible with common machining techniques. Direct 3D-printing of polydimethylsiloxane enables rapid production of novel chip geometries for a manifold of lab-on-a-chip applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
3D printed microfluidic devices: enablers and barriers
Waheed, S., Cabot, J. M., Macdonald, N. P., Lewis, T., Guijt, R. M., Paull, B., & Breadmore, M. C. (2016) · Lab on a Chip · doi:10.1039/c6lc00284f · Cited by 1,039
Low, Z.-X., Chua, Y. T., Ray, B. M., Mattia, D., Metcalfe, I. S., & Patterson, D. A. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.10.006 · Cited by 465
3D Printing of Transparent and Conductive Heterogeneous Hydrogel–Elastomer Systems
Tian, K., Bae, J., Bakarich, S. E., Yang, C., Gately, R. D., Spinks, G. M., in het Panhuis, M., Suo, Z., & Vlassak, J. J. (2017) · Advanced Materials · doi:10.1002/adma.201604827 · Cited by 419
Sidhikku Kandath Valappil, R., Ghasem, N., & Al-Marzouqi, M. (2021) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2021.03.030 · Cited by 415
Polymer Design for 3D Printing Elastomers: Recent Advances in Structure, Properties, and Printing
Herzberger, J., Sirrine, J. M., Williams, C. B., & Long, T. E. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101144 · Cited by 329
Cheng, X. Q., Wang, Z. X., Jiang, X., Li, T., Lau, C. H., Guo, Z., Ma, J., & Shao, L. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.006 · Cited by 315
Additive Manufacturing: Unlocking the Evolution of Energy Materials
Zhakeyev, A., Wang, P., Zhang, L., Shu, W., Wang, H., & Xuan, J. (2017) · Advanced Science · doi:10.1002/advs.201700187 · Cited by 291
The potential to enhance membrane module design with 3D printing technology
Lee, J.-Y., Tan, W. S., An, J., Chua, C. K., Tang, C. Y., Fane, A. G., & Chong, T. H. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.11.008 · Cited by 283
Self-assembled micro-organogels for 3D printing silicone structures
O’Bryan, C. S., Bhattacharjee, T., Hart, S., Kabb, C. P., Schulze, K. D., Chilakala, I., Sumerlin, B. S., Sawyer, W. G., & Angelini, T. E. (2017) · Science Advances · doi:10.1126/sciadv.1602800 · Cited by 277
3D printing for membrane separation, desalination and water treatment
Tijing, L. D., Dizon, J. R. C., Ibrahim, I., Nisay, A. R. N., Shon, H. K., & Advincula, R. C. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2019.100486 · Cited by 269
Simple 3D Printed Scaffold‐Removal Method for the Fabrication of Intricate Microfluidic Devices
Saggiomo, V., & Velders, A. H. (2015) · Advanced Science · doi:10.1002/advs.201500125 · Cited by 266
Metadata
- Authors
- Femmer, T., Kuehne, A. J. C., & Wessling, M.
- Venue
- Lab on a Chip
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 14
- Issue
- 15
- Pages
- 2610
- ISSN
- 1473-0189 (ISSN-L)
- 1473-0197
- OpenAlex
- W2170016567
- Cited by
- 161
- References
- 0
- FWCI
- 6.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.