The DOI matches its Crossref record; 96 of the 96 references it cites were found in a registry or an index.
Perspective on 3D printing of separation membranes and comparison to related unconventional fabrication techniques
Open accessAbstract
Additive manufacturing, likewise known as 3-dimensional (3D) printing and rapid prototyping, has the ability to create almost any geometrically complex shape or feature in a range of materials across different scales. It has found its applications in various areas, such as medicine (bioprinting), art, manufacturing and engineering. On the other hand, its use in separation membrane engineering is relatively new. The use of additive manufacturing techniques could provide more control towards the design of separation membrane systems and offers novel membrane preparation techniques that are able to produce membranes of different shapes, types and designs which cannot be made using conventional techniques such as phase inversion or sintering. Here we provide key background information on 3D printing technologies and applications in membrane engineering; a discussion of the potential and limitations of current 3D printing technologies for membrane engineering and future aspects of the technology. Due to the potential benefits of 3D printing in membrane manufacturing, in particular the unprecedented control over membrane architecture the technique could allow, the use of 3D printing in membrane systems should see significant growth in the near future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Honeycomb Carbon: A Review of Graphene
Allen, M. J., Tung, V. C., & Kaner, R. B. (2010) · Chemical Reviews · doi:10.1021/cr900070d · Cited by 6,998
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.10.004 · Cited by 3,260
Finer features for functional microdevices
Kawata, S., Sun, H.-B., Tanaka, T., & Takada, K. (2001) · Nature · doi:10.1038/35089130 · Cited by 2,871
Inkjet Printing—Process and Its Applications
Singh, M., Haverinen, H. M., Dhagat, P., & Jabbour, G. E. (2010) · Advanced Materials · doi:10.1002/adma.200901141 · Cited by 2,375
A review on electrospinning design and nanofibre assemblies
Teo, W. E., & Ramakrishna, S. (2006) · Nanotechnology · doi:10.1088/0957-4484/17/14/r01 · Cited by 2,289
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Imprint Lithography with 25-Nanometer Resolution
Chou, S. Y., Krauss, P. R., & Renstrom, P. J. (1996) · Science · doi:10.1126/science.272.5258.85 · Cited by 2,277
Cundy, C. S., & Cox, P. A. (2003) · Chemical Reviews · doi:10.1021/cr020060i · Cited by 2,126
Function-led design of new porous materials
Slater, A. G., & Cooper, A. I. (2015) · Science · doi:10.1126/science.aaa8075 · Cited by 1,663
Cited by
An Overview on 3D Printing Technology: Technological, Materials, and Applications
Shahrubudin, N., Lee, T. C., & Ramlan, R. (2019) · Procedia Manufacturing · doi:10.1016/j.promfg.2019.06.089 · Cited by 2,050
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Additive manufacturing — A review of 4D printing and future applications
Mitchell, A., Lafont, U., Hołyńska, M., & Semprimoschnig, C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.10.038 · Cited by 494
Wang, H., Zhang, W., Ladika, D., Yu, H., Gailevičius, D., Wang, H., Pan, C., Nair, P. N. S., Ke, Y., Mori, T., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214211 · Cited by 401
Effects of extrusion speed and printing speed on the 3D printing stability of extruded PEEK filament
Geng, P., Zhao, J., Wu, W., Ye, W., Wang, Y., Wang, S., & Zhang, S. (2019) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.11.023 · Cited by 321
Metadata
- Authors
- Low, Z.-X., Chua, Y. T., Ray, B. M., Mattia, D., Metcalfe, I. S., & Patterson, D. A.
- Venue
- Journal of Membrane Science
- Publisher
- Elsevier BV
- Published
- 2017-02
- Volume
- 523
- Pages
- 596-613
- ISSN
- 0376-7388 (ISSN-L)
- OpenAlex
- W2528321021
- Cited by
- 465
- References
- 96
- FWCI
- 17.93
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Perspective on 3D printing of separation membranes and comparison to related unconventional fabrication techniques. https://app.cochat.ai/papers/10.1016/j.memsci.2016.10.006
- The paper
- Low, Z.-X., Chua, Y. T., Ray, B. M., Mattia, D., Metcalfe, I. S., & Patterson, D. A. (2017). Perspective on 3D printing of separation membranes and comparison to related unconventional fabrication techniques. Journal of Membrane Science. https://doi.org/10.1016/j.memsci.2016.10.006
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.