Porosity modulation of activated ZIF-templated carbons via compaction for hydrogen and CO2 storage applications
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
The mechanical stability of activated ZIF-templated carbon materials, prepared via liquid impregnation and chemical vapour deposition (CVD) methods, was investigated by compaction at various pressures (compaction loads of 5 and 10 tonnes equivalent to 370 and 740 MPa, respectively). Compaction at 5 tonnes (370 MPa) was, unusually, found to increase the textural properties (surface area and pore volume) and gas (hydrogen and CO2) uptake capacity. In particular, compaction at 5 tonnes resulted in higher micropore surface area and pore volume, and an overall rise in the total surface area and pore volume. Compaction resulted in an improved gas uptake capacity of 6.5 wt% hydrogen (at −196 °C and 20 bar) and 2.4 mmol g−1 of CO2 (at 25 °C and 1 bar) for an activated ZIF-templated carbon compacted at 5 tonnes following preparation via liquid impregnation and carbonisation at 900 °C. When the carbon was compacted at 10 tonnes (740 MPa), the hydrogen and CO2 uptake was marginally lower at 5.7 wt% and 2.2 mmol g−1, respectively, compared to the uptake of 6.2 wt% hydrogen and 2.0 mmol g−1 CO2 for the equivalent non-compacted sample. More importantly, increase in packing density after compaction resulted in up to 70% improvement in volumetric hydrogen uptake, which reached 42.3 g l−1 at −196 °C and 20 bar, much higher than that for conventional activated carbons, and one of the highest values ever reported under these conditions. The genesis of the increase in textural properties after compaction appears to be linked to the pore size distribution and mechanical stability of the activated ZIF-templated carbons and their structural rearrangement under compaction, especially at a load of 5 tonnes that results in an increase in the proportion of microporosity.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Templated nanocarbons for energy storage
Nishihara, H., & Kyotani, T. (2012) · Advanced Materials · doi:10.1002/adma.201201715 · Cited by 745
Importance of small micropores in CO 2 capture by phenolic resin-based activated carbon spheres
Wickramaratne, N. P., & Jaroniec, M. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00388k · Cited by 415
Assessment of the Role of Micropore Size and N-Doping in CO 2 Capture by Porous Carbons
Sevilla, M., Parra, J. B., & Fuertes, A. B. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401423b · Cited by 410
Cited by
Metal–Organic Frameworks as Platforms for Catalytic Applications
Jiao, L., Wang, Y., Jiang, H., & Xu, Q. (2018) · Advanced Materials · doi:10.1002/adma.201703663 · Cited by 1,717
Development of MOF-Derived Carbon-Based Nanomaterials for Efficient Catalysis
Shen, K., Chen, X., Chen, J., & Li, Y. (2016) · ACS Catalysis · doi:10.1021/acscatal.6b01222 · Cited by 1,334
Recent advances in functionalized micro and mesoporous carbon materials: synthesis and applications
Benzigar, M. R., Talapaneni, S. N., Joseph, S., Ramadass, K., Singh, G., Scaranto, J., Ravon, U., Al-Bahily, K., & Vinu, A. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00787f · Cited by 976
Coromina, H. M., Walsh, D. A., & Mokaya, R. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09202g · Cited by 321
Self-citationOxygen-rich microporous carbons with exceptional hydrogen storage capacity
Blankenship, L. S., Balahmar, N., & Mokaya, R. (2017) · Nature Communications · doi:10.1038/s41467-017-01633-x · Cited by 311
Self-citationGadipelli, S., & Guo, Z. X. (2015) · ChemSusChem · doi:10.1002/cssc.201403402 · Cited by 260
Sangchoom, W., & Mokaya, R. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00351 · Cited by 193
Self-citationBalahmar, N., Mitchell, A. C., & Mokaya, R. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500867 · Cited by 177
Self-citationBiomass to porous carbon in one step: directly activated biomass for high performance CO 2 storage
Balahmar, N., Al-Jumialy, A. S., & Mokaya, R. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01722g · Cited by 160
Self-citationAdeniran, B., & Mokaya, R. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b05020 · Cited by 142
Self-citation
Metadata
- Authors
- Almasoudi, A., & Mokaya, R.
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014
- Volume
- 2
- Issue
- 28
- Pages
- 10960
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2000321345
- Cited by
- 43
- References
- 3
- FWCI
- 2.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.