A family of microporous carbons prepared via a simple metal salt carbonization route with high selectivity for exceptional gravimetric and volumetric post-combustion CO2capture
The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
Heating of a high carbon-containing metal salt under nitrogen generates microporous carbons with exceptional post-combustion CO2 capture ability. Depending on carbonisation temperature (600–1000 °C) and duration (0.5 to 4 h), microporous carbons with surface area and pore volume of 500–2100 m2 g−1 and 0.27–1.1 cm3 g−1, respectively, are generated. The proportion of microporosity is high; 96% of surface area and up to 92% of pore volume. The porosity is dominated by 6–7 Å pores, which is advantageous for CO2 uptake; the carbons capture up to 4.8 mmol g−1 at 1 bar and 25 °C. Under post-combustion flue gas stream conditions (0.15 bar CO2), the carbons capture up to 1.7 mmol g−1 of CO2, which is the highest so far reported for porous carbons. The carbons have excellent selectivity for CO2 over N2; a selectivity factor of 43 based on CO2 and N2 initial adsorption rates, an Ideal Adsorbed Solution Theory (IAST) selectivity factor of 50 and an equilibrium CO2/N2 adsorption ratio at 1 bar of 22.5 compared to typical values of 5–11 for carbons. Moreover, the carbons show excellent CO2 uptake for low pressure swing operations; working capacity of up to 5.4 and 3.4 mmol g−1 for pressure swing adsorption (PSA) from a pure CO2 stream (6 to 1 bar) and flue gas stream (1.2 to 0.2 bar), respectively. The working capacity for vacuum swing adsorption (VSA) is even more remarkable; reaching 5.1 and 2.4 mmol g−1 under pure CO2 (1.5 to 0.05 bar) and flue gas (0.3 to 0.01 bar) conditions, respectively. The carbons also have excellent working capacity for temperature swing adsorption (TSA). The carbons are readily densified to high packing density of up to 1.12 g cm−3 with no penalties on textural properties or gravimetric CO2 uptake. The densification and high gravimetric uptake, gives exceptional volumetric CO2 capture capacity of 71, 187 and 320 g l−1 at 0.15, 1 and 5 bar, respectively, and unrivalled working capacity for PSA, VSA and TSA processes. The simple synthesis route, optimal pore size and exceptional CO2 uptake means that the carbons offer an unprecedented combination of characteristics for post-combustion CO2 capture.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281
Carbon capture and storage: how green can black be
Haszeldine, R. S. (2009) · Science · doi:10.1126/science.1172246 · Cited by 2,021
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Carbon dioxide utilization with C–N bond formation: carbon dioxide capture and subsequent conversion
Yang, Z.-Z., He, L.-N., Gao, J., Liu, A.-H., & Yu, B. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02774g · Cited by 520
Importance of small micropores in CO 2 capture by phenolic resin-based activated carbon spheres
Wickramaratne, N. P., & Jaroniec, M. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00388k · Cited by 415
Assessment of the Role of Micropore Size and N-Doping in CO 2 Capture by Porous Carbons
Sevilla, M., Parra, J. B., & Fuertes, A. B. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401423b · Cited by 410
High-performance CO2 sorbents from algae
Sevilla, M., Falco, C., Titirici, M.-M., & Fuertes, A. B. (2012) · RSC Advances · doi:10.1039/c2ra22552b · Cited by 269
Critical role of small micropores in high CO2 uptake
Zhang, Z., Zhou, J., Xing, W., Xue, Q., Yan, Z., Zhuo, S., & Qiao, S. Z. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44436d · Cited by 263
Fungi-based porous carbons for CO2 adsorption and separation
Wang, J., Heerwig, A., Lohe, M. R., Oschatz, M., Borchardt, L., & Kaskel, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32139d · Cited by 220
Sustainable and hierarchical porous Enteromorpha prolifera based carbon for CO2 capture
Zhang, Z., Wang, K., Atkinson, J. D., Yan, X., Li, X., Rood, M. J., & Yan, Z. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.05.094 · Cited by 120
Cited by
Emerging trends in porous materials for CO2capture and conversion
Singh, G., Lee, J., Karakoti, A., Bahadur, R., Yi, J., Zhao, D., AlBahily, K., & Vinu, A. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00075b · Cited by 843
More Sustainable Chemical Activation Strategies for the Production of Porous Carbons
Sevilla, M., Díez, N., & Fuertes, A. B. (2021) · ChemSusChem · doi:10.1002/cssc.202001838 · Cited by 371
Coromina, H. M., Walsh, D. A., & Mokaya, R. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09202g · Cited by 321
Self-citationOxygen-rich microporous carbons with exceptional hydrogen storage capacity
Blankenship, L. S., Balahmar, N., & Mokaya, R. (2017) · Nature Communications · doi:10.1038/s41467-017-01633-x · Cited by 311
Self-citationFelix Sahayaraj, A., Joy Prabu, H., Maniraj, J., Kannan, M., Bharathi, M., Diwahar, P., & Salamon, J. (2023) · Journal of Inorganic and Organometallic Polymers and Materials · doi:10.1007/s10904-023-02657-1 · Cited by 267
Metadata
- Authors
- Adeniran, B., Masika, E., & Mokaya, R.
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2014-07-22
- Volume
- 2
- Issue
- 35
- Pages
- 14696
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W1978471751
- Cited by
- 80
- References
- 13
- FWCI
- 12.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.