The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
High and anisotropic carrier mobility in experimentally possible Ti2CO2(MXene) monolayers and nanoribbons
Abstract
MXene, a new kind of two-dimensional (2D) material, has a unique combination of excellent physical and chemical properties. Via computations on density functional theory and deformation potential theory, we investigated the electronic structure and predicted the carrier mobility of Ti2CO2 (a typical MXene) monolayers and nanoribbons. The Ti2CO2 monolayer is a semiconductor with a band gap of 0.91 eV, and the hole mobility in the monolayer reaches 10(4) orders of magnitude along both x and y directions, which is much higher than that of MoS2, while the electron mobility is about two orders of magnitude lower. The dramatic difference between the hole and electron mobilities also exists in nanoribbons. Moreover, our results suggest that width controlling and edge engineering would be effective in adjusting the carrier mobility of Ti2CO2 nanoribbons, and endow experimentally available Ti2CO2 with wide applications to field-effect transistors and photocatalysts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Semiempirical GGA‐type density functional constructed with a long‐range dispersion correction
Grimme, S. (2006) · Journal of Computational Chemistry · doi:10.1002/jcc.20495 · Cited by 31,038
Hybrid functionals based on a screened Coulomb potential
Heyd, J., Scuseria, G. E., & Ernzerhof, M. (2003) · The Journal of Chemical Physics · doi:10.1063/1.1564060 · Cited by 19,629
Electronics and optoelectronics of two-dimensional transition metal dichalcogenides
Wang, Q. H., Kalantar-Zadeh, K., Kis, A., Coleman, J. N., & Strano, M. S. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.193 · Cited by 16,374
Radisavljevic, B., Radenovic, A., Brivio, J., Giacometti, V., & Kis, A. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2010.279 · Cited by 14,939
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
Two-dimensional atomic crystals
Novoselov, K. S., Jiang, D., Schedin, F., Booth, T. J., Khotkevich, V. V., Morozov, S. V., & Geim, A. K. (2005) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0502848102 · Cited by 11,788
Van der Waals heterostructures
Geim, A. K., & Grigorieva, I. V. (2013) · Nature · doi:10.1038/nature12385 · Cited by 10,875
Cited by
Applications of 2D MXenes in energy conversion and storage systems
Pang, J., Mendes, R. G., Bachmatiuk, A., Zhao, L., Ta, H. Q., Gemming, T., Liu, H., Liu, Z., & Rummeli, M. H. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00324f · Cited by 1,951
Synthesis of two-dimensional titanium nitride Ti4N3(MXene)
Urbankowski, P., Anasori, B., Makaryan, T., Er, D., Kota, S., Walsh, P. L., Zhao, M., Shenoy, V. B., Barsoum, M. W., & Gogotsi, Y. (2016) · Nanoscale · doi:10.1039/c6nr02253g · Cited by 1,371
Electronic and Optical Properties of 2D Transition Metal Carbides and Nitrides (MXenes)
Hantanasirisakul, K., & Gogotsi, Y. (2018) · Advanced Materials · doi:10.1002/adma.201804779 · Cited by 1,325
2D MXenes: A New Family of Promising Catalysts for the Hydrogen Evolution Reaction
Gao, G., O’Mullane, A. P., & Du, A. (2017) · ACS Catalysis · doi:10.1021/acscatal.6b02754 · Cited by 1,153
Electronic properties and applications of MXenes: a theoretical review
Khazaei, M., Ranjbar, A., Arai, M., Sasaki, T., & Yunoki, S. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc00140a · Cited by 1,151
MXene and MXene-based composites: synthesis, properties and environment-related applications
Zhan, X., Si, C., Zhou, J., & Sun, Z. (2020) · Nanoscale Horizons · doi:10.1039/c9nh00571d · Cited by 1,135
Highly Conductive Optical Quality Solution‐Processed Films of 2D Titanium Carbide
Dillon, A. D., Ghidiu, M. J., Krick, A. L., Griggs, J., May, S. J., Gogotsi, Y., Barsoum, M. W., & Fafarman, A. T. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600357 · Cited by 988
Peng, C., Yang, X., Li, Y., Yu, H., Wang, H., & Peng, F. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11973 · Cited by 847
Fabrication of Ti3C2Tx MXene Transparent Thin Films with Tunable Optoelectronic Properties
Hantanasirisakul, K., Zhao, M., Urbankowski, P., Halim, J., Anasori, B., Kota, S., Ren, C. E., Barsoum, M. W., & Gogotsi, Y. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600050 · Cited by 838
Hong Ng, V. M., Huang, H., Zhou, K., Lee, P. S., Que, W., Xu, J. Z., & Kong, L. B. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta06772g · Cited by 784
MXene-based materials for electrochemical energy storage
Zhang, X., Zhang, Z., & Zhou, Z. (2018) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2017.08.004 · Cited by 777
Self-citationMXene: a promising photocatalyst for water splitting
Guo, Z., Zhou, J., Zhu, L., & Sun, Z. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta04414j · Cited by 744
A Review on MXene Synthesis, Stability, and Photocatalytic Applications
Murali, G., Reddy Modigunta, J. K., Park, Y. H., Lee, J.-H., Rawal, J., Lee, S.-Y., In, I., & Park, S.-J. (2022) · ACS Nano · doi:10.1021/acsnano.2c04750 · Cited by 668
Recent advance in MXenes: A promising 2D material for catalysis, sensor and chemical adsorption
Zhu, J., Ha, E., Zhao, G., Zhou, Y., Huang, D., Yue, G., Hu, L., Sun, N., Wang, Y., Lee, L. Y. S., et al. (2017) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2017.09.012 · Cited by 659
Wang, H., Wu, Y., Yuan, X., Zeng, G., Zhou, J., Wang, X., & Chew, J. W. (2018) · Advanced Materials · doi:10.1002/adma.201704561 · Cited by 634
Yu, M., Zhou, S., Wang, Z., Zhao, J., & Qiu, J. (2018) · Nano Energy · doi:10.1016/j.nanoen.2017.12.003 · Cited by 606
Monolayer MXenes: promising half-metals and spin gapless semiconductors
Gao, G., Ding, G., Li, J., Yao, K., Wu, M., & Qian, M. (2016) · Nanoscale · doi:10.1039/c6nr01333c · Cited by 495
Panda, S., Deshmukh, K., Khadheer Pasha, S. K., Theerthagiri, J., Manickam, S., & Choi, M. Y. (2022) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2022.214518 · Cited by 465
Baig, N. (2023) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2022.107362 · Cited by 450
Malaki, M., Maleki, A., & Varma, R. S. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta01850f · Cited by 416
Lai, S., Jeon, J., Jang, S. K., Xu, J., Choi, Y. J., Park, J.-H., Hwang, E., & Lee, S. (2015) · Nanoscale · doi:10.1039/c5nr06513e · Cited by 395
The Assembly of MXenes from 2D to 3D
Wu, Z., Shang, T., Deng, Y., Tao, Y., & Yang, Q. (2020) · Advanced Science · doi:10.1002/advs.201903077 · Cited by 384
Recent advances of MXenes as electrocatalysts for hydrogen evolution reaction
Bai, S., Yang, M., Jiang, J., He, X., Zou, J., Xiong, Z., Liao, G., & Liu, S. (2021) · npj 2D Materials and Applications · doi:10.1038/s41699-021-00259-4 · Cited by 383
Two-dimensional MXenes for energy storage
Sun, S., Liao, C., Hafez, A. M., Zhu, H., & Wu, S. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.12.155 · Cited by 378
Oxygen‐Functionalized Ultrathin Ti 3 C 2 T x MXene for Enhanced Electrocatalytic Hydrogen Evolution
Jiang, Y., Sun, T., Xie, X., Jiang, W., Li, J., Tian, B., & Su, C. (2019) · ChemSusChem · doi:10.1002/cssc.201803032 · Cited by 367
Chandrasekaran, A., Mishra, A., & Singh, A. K. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01035 · Cited by 292
Functional MXene Materials: Progress of Their Applications
Li, X., Wang, C., Cao, Y., & Wang, G. (2018) · Chemistry – An Asian Journal · doi:10.1002/asia.201800543 · Cited by 285
Zhang, H., Yang, G., Zuo, X., Tang, H., Yang, Q., & Li, G. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta04628b · Cited by 284
Ti2CO2MXene: a highly active and selective photocatalyst for CO2reduction
Zhang, X., Zhang, Z., Li, J., Zhao, X., Wu, D., & Zhou, Z. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03557h · Cited by 279
Self-citationXie, X., & Zhang, N. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202002528 · Cited by 276
A Ti-anchored Ti2CO2 monolayer (MXene) as a single-atom catalyst for CO oxidation
Zhang, X., Lei, J., Wu, D., Zhao, X., Jing, Y., & Zhou, Z. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00554c · Cited by 270
Self-citationPeng, C., Wang, H., Yu, H., & Peng, F. (2017) · Materials Research Bulletin · doi:10.1016/j.materresbull.2016.12.049 · Cited by 264
Metadata
- Authors
- Zhang, X., Zhao, X., Wu, D., Jing, Y., & Zhou, Z.
- Venue
- Nanoscale
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2015
- Volume
- 7
- Issue
- 38
- Pages
- 16020-16025
- ISSN
- 2040-3364 (ISSN-L)
- 2040-3372
- OpenAlex
- W1950367212
- Cited by
- 290
- References
- 49
- FWCI
- 10.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.