CoChat

Interplay between poly(ethylene oxide) and poly(l-lactide) blocks during diblock copolymer crystallization

Open access
Arnal, M. L., Boissé, S., Müller, A. J., Meyer, F., Raquez, J.-M., Dubois, P., Prud`homme, R. E. · 2016 · CrystEngComm
Cited by 26

The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.

Abstract

The influence of composition and crystallization conditions on the behavior of double crystalline poly (ethylene oxide-b-L-lactide) (PEO-b-PLLA) diblock copolymers is investigated. Poly(L-lactide) contents in the synthesized copolymers vary from 50 to 91%, and the molecular weight of the PLLA block ranges from 2 to 20 kg mol−1, while that of the PEO block is kept constant at 2 kg mol−1. In bulk samples, DSC results show a synergistic interaction between the crystallization processes of the two blocks. The PEO block provides heterogeneities and exerts a plasticizing action which favors the crystallization of the PLLA block with a nucleation efficiency of 30%. In contrast, the subsequent crystallization of the PEO block is subject to two opposing effects: (a) the nucleating action of PLLA crystals and (b) the topological and geometrical constraints imposed by PLLA crystals, especially when the PEO content is 20 wt% or less. In the case of ultra thin films, block copolymers with PEO contents equal or smaller than 20 wt% form distorted PLLA single crystals when crystallized from the melt. However, upon increasing the PEO content in the system to 33 wt% (by blending or copolymerization), the distortions disappear and the angle between the {110} growth faces changes from 140° to 121°, since the PEO block acts as a solvent or plasticizer for the PLLA block during the crystallization process. PEO incorporation can therefore tailor the rate and morphology of PLLA block crystallization. TEM and AFM studies allowed direct observation of the PEO block dendritic crystals on the surface of lozenge-shaped PLLA crystals previously formed during cooling from the melt.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1039/c6ce00330c

Cites

12 of 12 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 46

  1. I. W. Hamley , in Developments in Block Copolymer Science and Technology, ed. I. W. Hamley, Wiley, West Sussex, 2004, ch. 1, pp. 1–30 · DOI · Paper page
  2. N. Hadjichristidis , S.Pispas and G. A.Floudas, Block Copolymers: Synthetic Strategies, Physical Properties, and Applications, Wiley, New Jersey, 2003
  3. Y. L. Loo and R.Register, in Developments in Block Copolymer Science and Technology, ed. I. W. Hamley, Wiley, West Sussex, 2004, ch 6, pp. 213–242
  4. He, 2012, Prog. Polym. Sci., 37, 1350, 10.1016/j.progpolymsci.2012.05.002 · DOI · Paper page
  5. Slomkowski, 2007, Macromol. Symp., 253, 47, 10.1002/masy.200750706 · DOI · Paper page
  6. Rashkov, 1996, Macromolecules, 29, 50, 10.1021/ma950530t · DOI · Paper page
  7. Mothé, 2006, Thermochim. Acta, 445, 61, 10.1016/j.tca.2006.01.001 · DOI
  8. Sun, 2004, Polymer, 45, 5969, 10.1016/j.polymer.2004.06.026 · DOI · Paper page
  9. Huang, 2008, J. Polym. Sci., Part B: Polym. Phys., 46, 1400, 10.1002/polb.21474 · DOI · Paper page
  10. Huang, 2011, Polym. Bull., 67, 885, 10.1007/s00289-011-0518-8 · DOI
  11. Kim, 1999, J. Appl. Polym. Sci., 72, 341, 10.1002/(SICI)1097-4628(19990418)72:3<341::AID-APP4>3.0.CO;2-D · DOI
  12. Yang, 2006, J. Polym. Sci., Part B: Polym. Phys., 44, 3215, 10.1002/polb.20886 · DOI
  13. Cai, 2006, J. Polym. Sci., Part A: Polym. Chem., 44, 2034, 10.1002/pola.21318 · DOI · Paper page
  14. Yang, 2007, Macromolecules, 40, 2791, 10.1021/ma062727z · DOI · Paper page
  15. Yang, 2012, Macromolecules, 45, 4254, 10.1021/ma202505f · DOI · Paper page
  16. Yang, 2013, Polymer, 54, 3974, 10.1016/j.polymer.2013.05.032 · doi:10.1016/j.polymer.2013.05.032
  17. Meyer, 2011, Biomacromolecules, 12, 4086, 10.1021/bm201149g · DOI
  18. J. Brandrup , Polymer Handbook, ed. E. H. Emmergut, 3rd edn, Wiley, New York, 1989, pp. IV-72
  19. Turner, 2004, J. Therm. Anal. Calorim., 75, 257, 10.1023/B:JTAN.0000017347.08469.b1 · DOI
  20. Fillon, 1993, J. Polym. Sci., Part B: Polym. Phys., 31, 1383, 10.1002/polb.1993.090311013 · DOI · Paper page
  21. Xu, 2009, Nat. Mater., 8, 348, 10.1038/nmat2405 · DOI · Paper page
  22. Reiter, 1998, Phys. Rev. Lett., 80, 3771, 10.1103/PhysRevLett.80.3771 · DOI · Paper page
  23. Reiter, 2000, J. Chem. Phys., 112, 4376, 10.1063/1.480984 · DOI · Paper page
  24. Hölzer, 2015, Eur. Polym. J., 68, 10, 10.1016/j.eurpolymj.2015.04.010 · DOI
  25. Adamska, 2006, J. Chromatogr. A, 1132, 260, 10.1016/j.chroma.2006.07.066 · doi:10.1016/j.chroma.2006.07.066
  26. Karst, 2005, J. Appl. Polym. Sci., 96, 416, 10.1002/app.21456 · doi:10.1002/app.21456
  27. Matsen, 1996, Macromolecules, 29, 1091, 10.1021/ma951138i · DOI · Paper page
  28. Zhou, 2015, Polymer, 80, 123, 10.1016/j.polymer.2015.10.066 · DOI
  29. U. W. Gedde , Polymer Physics, Springer Science & Business Media, Berlin, 1995, pp. 143–210
  30. H. Frensch , P.Harnischfeger and B.-J.Jungnickel, in Multiphase Polymers: Blends and Ionomers, ed. L. A. Utracki and R. A. Weiss, ACS Symposium Series, Washington DC, 1989, ch. 5, p. 101 · DOI
  31. Arnal, 1998, Macromol. Chem. Phys., 199, 2275, 10.1002/(SICI)1521-3935(19981001)199:10<2275::AID-MACP2275>3.0.CO;2-# · DOI · Paper page
  32. Müller, 2002, Macromolecules, 35, 3048, 10.1021/ma012026w · DOI · Paper page
  33. Michell, 2009, Macromolecules, 42, 6671, 10.1021/ma901169r · DOI
  34. Fillon, 1993, J. Polym. Sci., Part B: Polym. Phys., 31, 1395, 10.1002/polb.1993.090311014 · DOI · Paper page
  35. Balsamo, 1998, Macromolecules, 31, 7756, 10.1021/ma980305m · DOI · Paper page
  36. Arnal, 2004, Eur. Polym. J., 40, 1461, 10.1016/j.eurpolymj.2004.02.023 · DOI
  37. Iwata, 1998, Macromolecules, 31, 2461, 10.1021/ma980008h · DOI · Paper page
  38. Hoogsten, 1990, Macromolecules, 23, 634, 10.1021/ma00204a041 · DOI · Paper page
  39. Chen, 2004, Macromolecules, 37, 5292, 10.1021/ma0493325 · DOI
  40. Hong, 2016, ACS Macro Lett., 5, 355, 10.1021/acsmacrolett.6b00040 · DOI
  41. Cheng, 1991, J. Polym. Sci., Part B: Polym. Phys., 29, 311, 10.1002/polb.1991.090290306 · DOI
  42. Cheng, 1991, J. Polym. Sci., Part B: Polym. Phys., 29, 299, 10.1002/polb.1991.090290305 · DOI
  43. Gestí, 2007, Polymer, 48, 5088, 10.1016/j.polymer.2007.06.057 · DOI
  44. Gestí, 2004, Polymer, 45, 8845, 10.1016/j.polymer.2004.10.039 · DOI
  45. Hoogsten, 1990, Macromolecules, 23, 634, 10.1021/ma00204a041 · DOI · Paper page
  46. Takahash, 1973, Macromolecules, 6, 672, 10.1021/ma60035a005 · DOI · Paper page

Cited by

See all 26

Metadata

Authors
Arnal, M. L., Boissé, S., Müller, A. J., Meyer, F., Raquez, J.-M., Dubois, P., & Prud`homme, R. E.
Venue
CrystEngComm
Published
2016
Volume
18
Issue
20
Pages
3635-3649
ISSN
1466-8033 (ISSN-L)
OpenAlex
W2342393687
Cited by
26
References
12
FWCI
2.23
Type
journal article
Language
en
Open access
green
Funders
Université de Montréal

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.