The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Lightweight and efficient microwave absorbing materials based on walnut shell-derived nano-porous carbon
Abstract
Lightweight microwave absorbing materials have drawn tremendous attention. Herein, nano-porous biomass carbon materials have been prepared by carbonization with a subsequent potassium hydroxide activation of walnut shells and the microwave absorption properties have also been investigated. The obtained samples have large specific surface areas with numerous micropores and nanopores. The sample activated at 600 °C with a specific surface area of 736.2 m2 g−1 exhibits the most enhanced microwave absorption performance. It has the maximum reflection loss of −42.4 dB at 8.88 GHz and the effective absorption bandwidth (reflection loss below −10 dB) is 1.76 GHz (from 8.08 GHz to 9.84 GHz), corresponding to a thickness of 2 mm. Additionally, the effective absorption bandwidth can reach 2.24 GHz (from 10.48 GHz to 12.72 GHz) when the absorber thickness is 1.5 mm. Three-dimensional porous architecture, interfacial polarization relaxation loss, and the dipolar relaxation loss make a great contribution to the excellent microwave absorption performance. In contrast, the non-activated sample with lower specific surface area (435.3 m2 g−1) has poor microwave absorption performance due to a poor dielectric loss capacity. This comparison highlights the role of micropores and nanopores in improving the dielectric loss property of porous carbon materials. To sum up, porous biomass carbon has great potential to become lightweight microwave absorbers. Moreover, KOH is an efficient activation agent in the fabrication of carbonaceous materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Understanding chemical reactions between carbons and NaOH and KOH
Lillo-Ródenas, M. A., Cazorla-Amorós, D., & Linares-Solano, A. (2003) · Carbon · doi:10.1016/s0008-6223(02)00279-8 · Cited by 1,199
Shell Thickness-Dependent Microwave Absorption of Core–Shell Fe3O4@C Composites
Du, Y., Liu, W., Qiang, R., Wang, Y., Han, X., Ma, J., & Xu, P. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502910d · Cited by 990
Tan, X.-F., Liu, S.-B., Liu, Y.-G., Gu, Y.-L., Zeng, G.-M., Hu, X.-J., Wang, X., Liu, S.-H., & Jiang, L.-H. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2016.12.083 · Cited by 711
Long, C., Chen, X., Jiang, L., Zhi, L., & Fan, Z. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.12.014 · Cited by 596
Porous Three-Dimensional Flower-like Co/CoO and Its Excellent Electromagnetic Absorption Properties
Lv, H., Liang, X., Ji, G., Zhang, H., & Du, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01654 · Cited by 570
Zhang, X., Ji, G., Liu, W., Quan, B., Liang, X., Shang, C., Cheng, Y., & Du, Y. (2015) · Nanoscale · doi:10.1039/c5nr03176a · Cited by 486
Wang, R., Wang, P., Yan, X., Lang, J., Peng, C., & Xue, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am302077c · Cited by 475
Conductive Carbon Nanofiber–Polymer Foam Structures
Yang, Y., Gupta, M. C., Dudley, K. L., & Lawrence, R. (2005) · Advanced Materials · doi:10.1002/adma.200500615 · Cited by 460
Zhang, Y., Huang, Y., Chen, H., Huang, Z., Yang, Y., Xiao, P., Zhou, Y., & Chen, Y. (2016) · Carbon · doi:10.1016/j.carbon.2016.04.070 · Cited by 447
Sudhan, N., Subramani, K., Karnan, M., Ilayaraja, N., & Sathish, M. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b01829 · Cited by 436
Hierarchically porous carbon by activation of shiitake mushroom for capacitive energy storage
Cheng, P., Gao, S., Zang, P., Yang, X., Bai, Y., Xu, H., Liu, Z., & Lei, Z. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.056 · Cited by 429
Microwave Absorption Enhancement of Porous Carbon Fibers Compared with Carbon Nanofibers
Li, G., Xie, T., Yang, S., Jin, J., & Jiang, J. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp300050u · Cited by 377
Maxwell Garnett theory for mixtures of anisotropic inclusions: Application to conducting polymers
Levy, O., & Stroud, D. (1997) · Physical Review B · doi:10.1103/physrevb.56.8035 · Cited by 366
Islam, M. A., Ahmed, M. J., Khanday, W. A., Asif, M., & Hameed, B. H. (2017) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2017.01.010 · Cited by 359
Long, C., Jiang, L., Wu, X., Jiang, Y., Yang, D., Wang, C., Wei, T., & Fan, Z. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.040 · Cited by 319
Zhang, S., Zeng, M., Li, J., Li, J., Xu, J., & Wang, X. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14604a · Cited by 285
Jiang, Q., Zhang, Z., Yin, S., Guo, Z., Wang, S., & Feng, C. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.03.204 · Cited by 281
Porous carbon made from rice husk as electrode material for electrochemical double layer capacitor
Gao, Y., Li, L., Jin, Y., Wang, Y., Yuan, C., Wei, Y., Chen, G., Ge, J., & Lu, H. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.12.070 · Cited by 249
Chang, J., Gao, Z., Wang, X., Wu, D., Xu, F., Wang, X., Guo, Y., & Jiang, K. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2014.12.169 · Cited by 248
Zhu, H., Shen, F., Luo, W., Zhu, S., Zhao, M., Natarajan, B., Dai, J., Zhou, L., Ji, X., Yassar, R. S., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.021 · Cited by 210
Self-citationLiu, X., Cui, X., Chen, Y., Zhang, X.-J., Yu, R., Wang, G.-S., & Ma, H. (2015) · Carbon · doi:10.1016/j.carbon.2015.09.036 · Cited by 207
Zhuo, H., Hu, Y., Tong, X., Zhong, L., Peng, X., & Sun, R. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.04.041 · Cited by 196
3D porous graphene with ultrahigh surface area for microscale capacitive deionization
Li, Z., Song, B., Wu, Z., Lin, Z., Yao, Y., Moon, K.-S., & Wong, C. P. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.11.018 · Cited by 182
Pan, H., Yin, X., Xue, J., Cheng, L., & Zhang, L. (2016) · Carbon · doi:10.1016/j.carbon.2016.05.045 · Cited by 171
Liu, R.-L., Liu, Y., Zhou, X.-Y., Zhang, Z.-Q., Zhang, J., & Dang, F.-Q. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2013.12.034 · Cited by 163
Shim, T., Yoo, J., Ryu, C., Park, Y.-K., & Jung, J. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.08.055 · Cited by 161
Darweesh, T. M., & Ahmed, M. J. (2016) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2016.12.032 · Cited by 155
Song, B., Zhao, J., Wang, M., Mullavey, J., Zhu, Y., Geng, Z., Chen, D., Ding, Y. L., Moon, K., Liu, M., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.10.057 · Cited by 145
Bhattacharya, P., Dhibar, S., Hatui, G., et al. (2014) · RSC Advances · doi:10.1039/c4ra00448e · Cited by 139
Zhu, C., & Akiyama, T. (2015) · Green Chemistry · doi:10.1039/c5gc02397a · Cited by 138
Nori-based N, O, S, Cl co-doped carbon materials by chemical activation of ZnCl2 for supercapacitor
Wang, C., & Liu, T. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.11.206 · Cited by 137
Gao, Y., Zhang, W., Yue, Q., Gao, B., Sun, Y., Kong, J., & Zhao, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.115 · Cited by 135
Popcorn-Derived Porous Carbon for Energy Storage and CO2Capture
Liang, T., Chen, C., Li, X., & Zhang, J. (2016) · Langmuir · doi:10.1021/acs.langmuir.6b01953 · Cited by 129
Hierarchical Porous and High Surface Area Tubular Carbon as Dye Adsorbent and Capacitor Electrode
Chen, L., Ji, T., Brisbin, L., & Zhu, J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02697 · Cited by 125
Liu, R., Zhang, H., Liu, S., Zhang, X., Wu, T., Ge, X., Zang, Y., Zhao, H., & Wang, G. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp06970j · Cited by 117
Su, Q., Li, J., Zhong, G., Du, G., & Xu, B. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp1113015 · Cited by 110
Yan, Z., & Luo, J. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.08.333 · Cited by 105
Ma, G., Guo, D., Sun, K., Peng, H., Yang, Q., Zhou, X., Zhao, X., & Lei, Z. (2015) · RSC Advances · doi:10.1039/c5ra11179j · Cited by 91
Jia, X., Wang, J., Zhu, X., Wang, T., Yang, F., Dong, W., Wang, G., Yang, H., & Wei, F. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.11.421 · Cited by 83
Tian, Z., Qiu, Y., Zhou, J., Zhao, X., & Cai, J. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.05.169 · Cited by 62
Wang, Z., Wu, J., He, T., & Wu, J. (2014) · Bioresource Technology · doi:10.1016/j.biortech.2014.05.123 · Cited by 59
Facile synthesis of biomass-derived hierarchical porous carbon microbeads for supercapacitors
Ma, Y., Yu, B., Guo, Y. H., & Wang, C. (2016) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-016-3233-4 · Cited by 21
Cited by
Gu, W., Sheng, J., Huang, Q., Wang, G., Chen, J., & Ji, G. (2021) · Nano-Micro Letters · doi:10.1007/s40820-021-00635-1 · Cited by 568
Zhao, H., Cheng, Y., Lv, H., Ji, G., & Du, Y. (2019) · Carbon · doi:10.1016/j.carbon.2018.10.027 · Cited by 504
Recent progress of biomass-derived carbon materials for supercapacitors
Wang, J., Zhang, X., Li, Z., Ma, Y., & Ma, L. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.227794 · Cited by 460
Xiang, Z., Song, Y., Xiong, J., Pan, Z., Wang, X., Liu, L., Liu, R., Yang, H., & Lu, W. (2019) · Carbon · doi:10.1016/j.carbon.2018.10.014 · Cited by 456
Liu, P., Gao, S., Wang, Y., Huang, Y., Wang, Y., & Luo, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b08525 · Cited by 436
Metadata
- Authors
- Qiu, X., Wang, L., Zhu, H., Guan, Y., & Zhang, Q.
- Venue
- Nanoscale
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2017
- Volume
- 9
- Issue
- 22
- Pages
- 7408-7418
- ISSN
- 2040-3364 (ISSN-L)
- 2040-3372
- OpenAlex
- W2610495789
- Cited by
- 598
- References
- 42
- FWCI
- 15.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.