CoChat

Interactive effects of solar UV radiation and climate change on material damage

Andrady, A. L., Pandey, K. K., Heikkilä, A. M. · 2019 · Photochemical & Photobiological Sciences
Cited by 132

The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.

Abstract

Solar UV radiation adversely affects the properties of organic materials used in construction, such as plastics and wood. The outdoor service lifetimes of these materials are influenced by their rates of degradation under solar UV radiation as well as by other climate factors such as temperature, moisture, and atmospheric pollutants. While recovery of the stratospheric ozone layer is expected, local increases in UV radiation are still likely to occur, especially in the tropics, but also elsewhere because of climate change effects. Such increases, when taken together with an increased ambient temperature due to climate change, can significantly shorten the service lifetimes of organic building materials. Several proven technologies, including the use of UV stabilisers, surface treatments or coatings have been developed over the years to mitigate these adverse effects. While these technologies should be able to compensate for any realistic future UV radiation and climate change scenarios, they will also add significantly to the lifetime cost of material in relevant products. Shorter outdoor lifetime of the plastic components in photovoltaic (PV) modules is a serious concern in the solar energy industry. To ensure module durability over the full service-lifetime (of about ~20 years) of the light-harvesting PV components, better stabilisation technologies are being investigated. The present trend towards more environmentally sustainable materials in building, and environmental impact of additives such as stabilisers, need to be considered in addition to their engineering performance. This may require the phasing out of some conventional additives used in plastics as well as substituting wood or other materials in place of plastics in buildings. Depending on the relative costs of mitigation, substituting more UV-stable materials for conventional ones in outdoor products may also be a viable option with some categories of products. Neither the global cost of mitigation of the effects of climate change on materials nor the long-term sustainability of the technologies available for the purpose, have been estimated. Plastic waste and litter exposed outdoors to solar UV radiation over extended periods undergo cracking and fragmentation into small pieces (of micro- and nano-scale size). Release of these fragments into the environment, particularly in the aquatic environment, poses a potential threat to marine biota. Already several hundred of species are known to ingest these fragments that can potentially accumulate additives and pollutants from water. This is a potential threat to humans because 25% of fish marketed for human consumption have been reported to contain microplastics in their digestive systems. The focus of this assessment is on recent advances in understanding the mechanisms of UV-radiation-induced degradation in materials and in assessing emerging technologies for their stabilisation against outdoor UV-degradation. A better understanding of the mechanisms of degradation will allow for innovative stabilisation approaches to be developed. Also assessed is information on the sustainability of the available and emerging UV stabilisation technologies

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1039/c8pp90065e

Cites

16 of 16 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 132

Metadata

Authors
Andrady, A. L., Pandey, K. K., & Heikkilä, A. M.
Venue
Photochemical & Photobiological Sciences
Published
2019-03
Volume
18
Issue
3
Pages
804-825
ISSN
  • 1474-905X (ISSN-L)
  • 1474-9092
OpenAlex
W2917810751
Cited by
132
References
16
FWCI
6.40
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.