Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.

PtRu/C catalyst slurry preparation for large-scale decal transfer with high performance of proton exchange membrane fuel cells

Open access

Abstract

A large-area membrane-electrode assembly (MEA) has been fabricated using the decal transfer method with a methanol-based PtRu/C catalyst slurry and its excellent performance was realized by using reformed hydrogen gas.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1039/c8ra07754a

Cites

44 of 44 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Schematic diagram of the ionomer–PtRu/C agglomerate dispersion in catalyst slurry solution and the MEA fabrication process using decal transfer method.
Fig. 1 Schematic diagram of the ionomer–PtRu/C agglomerate dispersion in catalyst slurry solution and the MEA fabrication process using decal transfer method.CC BY-NC · PubMed Central
Fig. 2 Stability of PtRu/C catalyst slurry depending on each solvent and spreading condition by doctor blade on polyimide (Kapton®) film. (a) D.I. water, (b) methanol, (c) ethanol, (d) 2-propanol, (e) 1-propanol, (f) isopropyl alcohol, (g) n-butyl alcohol, and (h) n-butyl acetate.
Fig. 2 Stability of PtRu/C catalyst slurry depending on each solvent and spreading condition by doctor blade on polyimide (Kapton®) film. (a) D.I. water, (b) methanol, (c) ethanol, (d) 2-propanol, (e) 1-propanol, (f) isopropyl alcohol, (g) n-butyl alcohol, and (h) n-butyl acetate.CC BY-NC · PubMed Central
Fig. 3 Particle size distribution of catalyst and ionomer agglomerates for the catalyst slurry with different solvents from DLS results. (a) Pt/C catalyst slurry dispersion and (b) PtRu/C catalyst slurry dispersion.
Fig. 3 Particle size distribution of catalyst and ionomer agglomerates for the catalyst slurry with different solvents from DLS results. (a) Pt/C catalyst slurry dispersion and (b) PtRu/C catalyst slurry dispersion.CC BY-NC · PubMed Central
Fig. 4 Polarization and power density curves of PtRu/C-based MEA with varying MEA fabrication methods under (a) H2/O2 and (b) H2/air. The anode was commercial PtRu/C (53.5 wt% TKK catalyst, 0.20 mgPtRu cm−2) and the cathode catalyst was a commercial Pt/C (46.4 wt% TKK catalyst, 0.30 mgPt cm−2).
Fig. 4 Polarization and power density curves of PtRu/C-based MEA with varying MEA fabrication methods under (a) H2/O2 and (b) H2/air. The anode was commercial PtRu/C (53.5 wt% TKK catalyst, 0.20 mgPtRu cm−2) and the cathode catalyst was a commercial Pt/C (46.4 wt% TKK catalyst, 0.30 mgPt cm−2).CC BY-NC · PubMed Central
Fig. 5 Cyclic voltammetry of PtRu/C based-MEAs with spray and decal fabrication methods.
Fig. 5 Cyclic voltammetry of PtRu/C based-MEAs with spray and decal fabrication methods.CC BY-NC · PubMed Central
Fig. 6 FE-SEM images of the anode surface (a and b) and cross-section (c) of spray fabrication method MEA; and corresponding images of decal MEA (d, e, and f).
Fig. 6 FE-SEM images of the anode surface (a and b) and cross-section (c) of spray fabrication method MEA; and corresponding images of decal MEA (d, e, and f).CC BY-NC · PubMed Central
Fig. 7 In situ EISs of (a) spray MEA and (b) decal MEA; (c) the ohmic and charge transfer resistances of the cell using a spray and decal MEA from EIS results.
Fig. 7 In situ EISs of (a) spray MEA and (b) decal MEA; (c) the ohmic and charge transfer resistances of the cell using a spray and decal MEA from EIS results.CC BY-NC · PubMed Central
Fig. 8 Polarization and power density curves of large-area PtRu/C-based MEA. The active cell area was 51.84 cm2 and test was performed at 65 °C and fully humidified H2 and reforming gas/air was used in the MEA under atmospheric pressure. The anode was commercial PtRu/C (53.5 wt% TKK catalyst, 0.20 mgPtRu cm−2) and the cathode catalyst was a commercial Pt/C (46.4 wt% TKK catalyst, 0.30 mgPt cm−2).
Fig. 8 Polarization and power density curves of large-area PtRu/C-based MEA. The active cell area was 51.84 cm2 and test was performed at 65 °C and fully humidified H2 and reforming gas/air was used in the MEA under atmospheric pressure. The anode was commercial PtRu/C (53.5 wt% TKK catalyst, 0.20 mgPtRu cm−2) and the cathode catalyst was a commercial Pt/C (46.4 wt% TKK catalyst, 0.30 mgPt cm−2).CC BY-NC · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 43 references

Cited by

See all 22

Metadata

Authors
Choi, M., Kim, J. K., Kim, J., Yang, S., Park, J.-E., Kim, O.-H., & Cho, Y.-H.
Affiliations
  • Sogang University (KR)
  • Kangwon National University (KR)
  • Korea Electric Power Corporation (South Korea) (KR)
  • Seoul National University (KR)
  • Korea Naval Academy (KR)
Corresponding author
  • Kim, Ok-Hee
  • Cho, Yong-Hun
Venue
RSC Advances
Published
2018
Volume
8
Issue
63
Pages
36313-36322
ISSN
2046-2069 (ISSN-L)
OpenAlex
W2898592884
Cited by
21
References
43
Citations by year
2026: 6 · 2025: 3 · 2024: 2 · 2023: 3 · 2022: 1 · 2021: 4 · 2020: 2
FWCI
0.57
Type
journal article
Language
en
Open access
Locations
  • RSC Advances (publishedVersion, cc-by-nc)
  • PubMed Central (publishedVersion, cc-by-nc)
  • PubMed (publishedVersion)
Funders
  • Korea Electric Power Corporation (R18XA06-33, R16EA01)
  • National Research Foundation of Korea
  • Ministry of Education
  • Daewoo Shipbuilding & Marine Engineering
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Chemical Engineering › Catalysis › Catalysts for Methane Reforming
Keywords
PtRu/C catalyst, membrane electrode assembly, proton exchange membrane fuel cells

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.