Student or educator? Sign up with your school email and get 6 months of Pro free.

The DOI matches its Crossref record; 55 of the 55 references it cites were found in a registry or an index; 2 of the 41 sources its claims cite were checked for support.

Transition metal–phenanthroline intercalated montmorillonite as efficient electrocatalysts for the oxygen evolution reaction

Open access
Lee, In Seon, Jeong, Jae Ryeol, Dang Van, Cu, Lee, Min Hyung·2025·Journal of Materials Chemistry A

Abstract

MMT-based organo-metallic catalysts M(Phen) 2 (M = Ni, Co, Fe) were synthesized via sonication-assisted intercalation. Expanded interlayers improve OER activity. MMT:Co(Phen) 2 shows the best performance with low overpotential and long-term stability.

Overview

CoChat Summary

TL;DR

Transition metal–phenanthroline complexes (Ni, Co, Fe) were intercalated into montmorillonite (MMT) and tested as oxygen evolution reaction (OER) electrocatalysts. MMT:Co(Phen)₂ gave the best activity, with a 313 mV overpotential at 10 mA cm⁻² and stable operation over 50 h.

Key findings

  • MMT:Co(Phen)₂ showed the lowest OER overpotential at 10 mA cm⁻² (η₁₀ = 313 mV), compared with MMT:Ni(Phen)₂ (320 mV) and MMT:Fe(Phen)₂ (361 mV).
  • Tafel slopes were 43 mV dec⁻¹ for MMT:Co(Phen)₂, 47 mV dec⁻¹ for MMT:Ni(Phen)₂, and 54 mV dec⁻¹ for MMT:Fe(Phen)₂.
  • Charge-transfer resistance was much lower for MMT:Ni(Phen)₂ (13.5 Ω cm²) and MMT:Co(Phen)₂ (22.1 Ω cm²) than for MMT:Fe(Phen)₂ (1450.4 Ω cm²); bare carbon paper, Na-MMT, and MMT:Phen had Rct values of 274.1, 1858.6, and 167.3 Ω cm², respectively.
  • At 350 mV overpotential, MMT:Co(Phen)₂ had the highest ECSA-normalized current density (37.04 mA cm⁻²) and TOF (0.966 s⁻¹), versus MMT:Ni(Phen)₂ (32.63 mA cm⁻²; 0.487 s⁻¹) and MMT:Fe(Phen)₂ (3.16 mA cm⁻²; 0.00577 s⁻¹). All three catalysts showed negligible potential drift over a 50 h chronopotentiometry test at 10 mA cm⁻².

Methods

  • Na-MMT was purified and converted to Na-MMT, then modified by cation exchange with 1,10-phenanthroline (Phen) in ethanol; MMT:M(Phen)₂ (M = Ni, Co, Fe) was formed by reacting MMT:Phen with metal nitrate precursors at a 1:2 mass ratio in ethanol at 70 °C for two weeks with daily ultrasonication.
  • Characterization included FT-IR, XRD, SAXS, XPS, SEM, HR-TEM, EDS, ICP-MS, TGA, and BET surface area/pore analysis.
  • OER performance was measured in a three-electrode cell with 1 M KOH, catalyst-coated carbon paper working electrode, Pt mesh counter electrode, and Hg/HgO reference electrode; analysis included LSV, Tafel plots, EIS, CV-derived Cdl/ECSA, ICP-MS-based TOF, and 50 h chronopotentiometry at 10 mA cm⁻².

Limitations

  • The paper does not state limitations.
  • Evident from the text: the study tests only three transition metals (Ni, Co, Fe) and one clay support (MMT); long-term stability is demonstrated only for 50 h at 10 mA cm⁻²; and TOF calculations assume all metal ions estimated by ICP-MS serve as active sites.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1039/d5ta00244c

Cites

55 of 55 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Image 1
CC-BY · From the PDF
Fig. 2 (a) FT-IR spectra and (b) XRD patterns for Na-MMT, MMT:Phen, and MMT:M(Phen)2 composites. High-resolution XPS spectra of (c) Ni 2p, Co 2p, Fe 2p, and (d) O 1s of MMT:M(Phen)2.
Fig. 2 (a) FT-IR spectra and (b) XRD patterns for Na-MMT, MMT:Phen, and MMT:M(Phen)2 composites. High-resolution XPS spectra of (c) Ni 2p, Co 2p, Fe 2p, and (d) O 1s of MMT:M(Phen)2.CC-BY · From the PDF
Fig. 3 SEM images and TEM images of (a and f) Na-MMT, (b and g) MMT:Phen, (c and h) MMT:Ni(Phen)2, (d and i) MMT:Co(Phen)2, and (e and j) MMT:Fe(Phen)2.
Fig. 3 SEM images and TEM images of (a and f) Na-MMT, (b and g) MMT:Phen, (c and h) MMT:Ni(Phen)2, (d and i) MMT:Co(Phen)2, and (e and j) MMT:Fe(Phen)2.CC-BY · From the PDF
Fig. 4 Electrochemical OER performance of catalysts. (a) LSV curves, (b) overpotentials, (c) Tafel plots, (d) Nyquist plots (inset: equivalent circuit model), (e) ECSA-normalized LSV curves, (f) TOF curves, and (g) long-term stability tests of MMT:M(Phen)2 at a current density of 10 mA cm -2 .
Fig. 4 Electrochemical OER performance of catalysts. (a) LSV curves, (b) overpotentials, (c) Tafel plots, (d) Nyquist plots (inset: equivalent circuit model), (e) ECSA-normalized LSV curves, (f) TOF curves, and (g) long-term stability tests of MMT:M(Phen)2 at a current density of 10 mA cm -2 .CC-BY · From the PDF

Verification

Claims the paper makes

2 Valid · 0 Not valid · 23 Not checked · 66 Own results and interpretations

40 more claims

Create a free account to see all 91 claims and to verify the 2 references still open.

See all claims — free account
  • It may state two separate claims as one. 39
  • Probably not a substantial claim. 7
  • The quote only partly states this claim. 1

Create a free account to see these claims.

Citations

Cites

Show all 54 references

Research works printed but not linked: 4

  1. Odom, 1984, Philos. Trans. R. Soc., A, 311, 391
  2. Almadani, 2016, Int. J. Appl. Chem., 12, 62
  3. Swai, 2020, J. Pet. Explor. Prod., 10, 3515
  4. Harun, 2016, Int. J. Sci. Res. Dev., 3, 90

Metadata

Authors
Lee, I. S., Jeong, J. R., Dang Van, C., & Lee, M. H.
Affiliations
  • Kyung Hee University (KR)
  • Department of Applied Chemistry, Kyung Hee University, Yongin, Gyeonggi 17104, Korea
Corresponding author
Lee, Min Hyung
Venue
Journal of Materials Chemistry A
Published
2025
Volume
13
Issue
18
Pages
13195-13204
ISSN
  • 2050-7488 (ISSN-L)
  • 2050-7496
OpenAlex
W4408805675
Cited by
8
References
54
Citations by year
2026: 7 · 2025: 1
FWCI
1.10
Type
journal article
Language
en
Open access
Locations
Journal of Materials Chemistry A (publishedVersion, cc-by)
Funders
National Research Foundation of Korea (NRF-2020M3H7A1096388, NRF-2021R1A2C2010244)
Topics
  • Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
  • Physical Sciences › Materials Science › Materials Chemistry › Catalytic Processes in Materials Science
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Supercapacitor Materials and Fabrication
Keywords
montmorillonite, phenanthroline, transition metal complexes, oxygen evolution reaction, electrocatalysts, intercalation, overpotential, catalyst stability

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.