Cited by 10Catalysts for Methane ReformingCatalytic Processes in Materials ScienceCatalysis and Oxidation Reactions

Interaction of Carbon Dioxide with Oxidised La/Cu(111)

de Asha, A. M., Nix, R. M.·1995·Journal of the Chemical Society, Faraday Transactions

Abstract

The interaction of carbon dioxide at 300 K with various types of pre-oxidised lanthanum films on Cu(111) has been examined in detail by X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), ΔΦ(work function) measurements and temperature-programmed desorption (TPD). The exact nature and extent of the interactions of CO2 with the LaOx films proved to be strongly dependent on the oxide preparation and the thickness of the film, although spectral evidence points to the predominant formation of various surface carbonate complexes in all cases. On the partially-reduced surfaces there is a greater probability for irreversible adsorption, with thermal dissociation leading to the generation of gas-phase CO, but the extent of the overall adsorption process is not related to the surface oxygen vacancy concentration. The strongest binding and largest uptake of CO2 were found on disordered, unannealed oxide films and this is discussed in the context of the properties of metal/lanthana catalysts for methanol synthesis.

Integrity signals

Registry

Crossref · 10.1039/ft9959103611

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • The La/Ni fluctuations are likely formed due to NiO evaporation and interaction of film surface with environment during heat treatment.

    “These fluctuations are likely formed due to NiO evaporation and an interaction of the film surface with the environment during the heat treatment [50,51,52,53,54,55].”

    From Control of Columnar Grain Microstructure in CSD LaNiO3 Films (2023) · cites this paper as [55]

  • The film surface changes in composition due to NiO evaporation and interaction with atmosphere.

    “As it was pointed earlier (see Figure 2), the film surface changes in composition due to NiO evaporation and interaction with the atmosphere [50,51,52,53,54,55].”

    From Control of Columnar Grain Microstructure in CSD LaNiO3 Films (2023) · cites this paper as [55]

Cited by

Sorted by citations

Authors
de Asha, A. M., & Nix, R. M.
Venue
Journal of the Chemical Society, Faraday Transactions
Published
1995
Volume
91
Issue
20
Pages
3611
ISSN
  • 0956-5000 (ISSN-L)
  • 1364-5455
OpenAlex
W2058564478
Cited by
10
References
0
Citations by year
2023: 1 · 2016: 1
FWCI
0.67
Type
journal article
Language
en
Open access
closed
Locations
Journal of the Chemical Society Faraday Transactions (publishedVersion)
Topics
  • Physical Sciences › Chemical Engineering › Catalysis › Catalysts for Methane Reforming
  • Physical Sciences › Materials Science › Materials Chemistry › Catalytic Processes in Materials Science
  • Physical Sciences › Chemical Engineering › Catalysis › Catalysis and Oxidation Reactions
Keywords
CO2 adsorption, Cu(111) substrate, surface oxidation, carbonate complexes, CO2 dissociation, work function change, film thickness effects, oxygen vacancies, methanol synthesis

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review