The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Atomistic simulation of dislocations, surfaces and interfaces in MgO
Abstract
A new simulation code for modelling extended defects e.g. linear (dislocations) and planar (surfaces and grain boundaries) at the atomistic level is introduced. One of the key components is the ability to calculate the Coulombic potential of a solid with one-dimensional periodicity. This approach has been applied to screw dislocations in MgO and we have evaluated the structure (including core size) and stability of the 〈100〉 and 1/2〈110〉 screw dislocations. The 1/2〈110〉 dislocation, which has the shortest Burgers vector, was found to be more stable, as predicted by elasticity theory, although the simulations show that elasticity theory underestimates the energy difference.In addition, it has been shown that by using this new computer simulation code METADISE, following the approach of Tasker, the structure and energetics of surfaces and interfaces can be calculated. This method has been applied to modelling micro-faceting and it was found that micro-facetted {110} and {111} surfaces of MgO are the most stable forms of these surfaces. The formation energy of tilt grain boundaries in MgO ({h10} and {h20}) as a function of misorientation angle was also investigated and it was found that for the {h10} series the formation energy is proportional to the interfacial bond density while no such pattern can be found for the {h20} series.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The stability of ionic crystal surfaces
Tasker, P. W. (1979) · Journal of Physics C: Solid State Physics · doi:10.1088/0022-3719/12/22/036 · Cited by 1,822
The electrostatic potential in the surface region of an ionic crystal
Parry, D. E. (1975) · Surface Science · doi:10.1016/0039-6028(75)90362-3 · Cited by 410
The surface energies, surface tensions and surface structure of the alkali halide crystals
Tasker, P. W. (1979) · Philosophical Magazine A · doi:10.1080/01418617908236887 · Cited by 307
Adsorption of Na atoms and oxygen-containing molecules on MgO(100) and (111) surfaces
Onishi, H., Egawa, C., Aruga, T., & Iwasawa, Y. (1987) · Surface Science · doi:10.1016/s0039-6028(87)81192-5 · Cited by 260
Thermal faceting of (110) and (111) surfaces of MgO
Henrich, V. E. (1976) · Surface Science · doi:10.1016/0039-6028(76)90190-4 · Cited by 192
The lattice dynamics and thermodynamics of the Mg2SiO4 polymorphs
Price, G. D., Parker, S. C., & Leslie, M. (1987) · Physics and Chemistry of Minerals · doi:10.1007/bf00308782 · Cited by 131
Self-citationComputer modelling of inorganic solids and surfaces
Parker, S. C., Kelsey, E. T., Oliver, P. M., et al. (1993) · Faraday Discussions · doi:10.1039/fd9939500075 · Cited by 59
Self-citationSelf-diffusion along dislocations in single-crystals MgO
Sakaguchi, I., Yurimoto, H., & Sueno, S. (1992) · Solid State Communications · doi:10.1016/0038-1098(92)90453-g · Cited by 37
Cited by
The General Utility Lattice Program ( GULP )
Gale, J. D., & Rohl, A. L. (2003) · Molecular Simulation · doi:10.1080/0892702031000104887 · Cited by 2,265
Noguera, C. (2000) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/12/31/201 · Cited by 770
Metal oxide resistive memory switching mechanism based on conductive filament properties
Bersuker, G., Gilmer, D. C., Veksler, D., Kirsch, P., Vandelli, L., Padovani, A., Larcher, L., McKenna, K., Shluger, A., Iglesias, V., et al. (2011) · Journal of Applied Physics · doi:10.1063/1.3671565 · Cited by 486
Sayle, D. C., Maicaneanu, S. A., & Watson, G. W. (2002) · Journal of the American Chemical Society · doi:10.1021/ja020657f · Cited by 273
Self-citationEfficient creation and convergence of surface slabs
Sun, W., & Ceder, G. (2013) · Surface Science · doi:10.1016/j.susc.2013.05.016 · Cited by 269
Metadata
- Authors
- Watson, G. W., Kelsey, E. T., de Leeuw, N. H., Harris, D. J., & Parker, S. C.
- Venue
- Journal of the Chemical Society, Faraday Transactions
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 1996
- Volume
- 92
- Issue
- 3
- Pages
- 433
- ISSN
- 0956-5000 (ISSN-L)
- 1364-5455
- OpenAlex
- W2013202432
- Cited by
- 510
- References
- 8
- FWCI
- 8.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.