The DOI matches its Crossref record.
Feature article. Preparation of new polyimide–silica hybrid materials via the sol–gel process
Abstract
After a description of the preparation of polymer-metal oxide hybrid materials via the sol-gel method, recent results on the preparation of new polyimide-silica hybrid materials are reviewed. Tetraethoxysilane (TEOS) can be hydrolysed and polycondensed to form a three-dimensional silica-gel network in a solution of polyamic acids, the precursor polymers of polyimides, and N,N-dimethylacetamide (DMAc). Films of the polyamic acid-silica gel mixtures can be cast onto glass plates, and can then be heated to 300 °C to convert the component matrix polymers to polyimides. Five kinds of polyamic acid have been designed and prepared. One of them was the usual polyamic acid, having no connection site with silica, whereas others had ethoxysilyl groups in the polymer backbone. The polyimide-silica hybrid films containing 70 wt.% of silica were self-standing and tough. The transparent-opaque changing points shifted to higher silica content with increasing ethoxysilyl-group content of the matrix polyimides. The silica particles were dispersed homogeneously in the matrix polyimides, as observed by scanning electron microscopy. The size of the silica particles increased with increasing silica content, and decreased with increasing ethoxysilyl content. Results of the dynamic-mechanical analysis indicate that movement of the polyimide chain in the matrix is restricted, especially when the polyimides contain higher amounts of ethoxysilyl. The tensile strength of the hybrid films showed no decrease with increasing silica content, whereas the tensile modulus increased in all cases except that where the matrix polyimide did not contain any ethoxysilyl groups.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Designed Hybrid Organic−Inorganic Nanocomposites from Functional Nanobuilding Blocks
Sanchez, C., Soler-Illia, G. J. D. A. A., Ribot, F., Lalot, T., Mayer, C. R., & Cabuil, V. (2001) · Chemistry of Materials · doi:10.1021/cm011061e · Cited by 1,240
Hybrid organic–inorganic materials: a land of multidisciplinarity
Judeinstein, P., & Sanchez, C. (1996) · J. Mater. Chem. · doi:10.1039/jm9960600511 · Cited by 1,168
Nanocomposite Materials for Optical Applications
Beecroft, L. L., & Ober, C. K. (1997) · Chemistry of Materials · doi:10.1021/cm960441a · Cited by 1,019
Organic–inorganic nanocomposite polymer electrolyte membranes for fuel cell applications
Tripathi, B. P., & Shahi, V. K. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.12.005 · Cited by 576
Sol–gel coatings for corrosion protection of metals
Zheludkevich, M. L., Salvado, I. M., & Ferreira, M. G. S. (2005) · Journal of Materials Chemistry · doi:10.1039/b419153f · Cited by 527
Metadata
- Authors
- Morikawa, A., Iyoku, Y., Kakimoto, M.-A., & Imai, Y.
- Venue
- J. Mater. Chem.
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 1992
- Volume
- 2
- Issue
- 7
- Pages
- 679-689
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2031181181
- Cited by
- 189
- References
- 0
- FWCI
- 5.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Feature article. Preparation of new polyimide–silica hybrid materials via the sol–gel process. https://app.cochat.ai/papers/10.1039/jm9920200679
- The paper
- Morikawa, A., Iyoku, Y., Kakimoto, M.-A., & Imai, Y. (1992). Feature article. Preparation of new polyimide–silica hybrid materials via the sol–gel process. J. Mater. Chem. https://doi.org/10.1039/jm9920200679
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.