The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Fuel cell power conditioning for electric power applications: a summary
Abstract
Fuel cells are considered to be one of the most promising sources of distributed energy because of their high efficiency, low environmental impact and scalability. Unfortunately, multiple complications exist in fuel cell operation. Fuel cells cannot accept current in the reverse direction, do not perform well with ripple current, have a low output voltage that varies with age and current, respond sluggishly to step changes in load and are limited in overload capabilities. For these reasons, power converters are often necessary to boost and regulate the voltage as a means to provide a stiff applicable DC power source. Furthermore, the addition of an inverter allows for the conversion of DC power to AC for an utility interface or for the application of an AC motor. To help motivate the use of power conditioning for the fuel cell, a brief introduction of the different types, applications and typical electrical characteristics of fuel cells is presented. This is followed by an examination of the various topologies of DC–DC boost converters and inverters used for power conditioning of fuel cells. Several architectures to aggregate multiple fuel cells for high-voltage/high-power applications are also reviewed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dicks, A. L., & Rand, D. A. J. (2018) · Wiley eBooks · doi:10.1002/9781118706992 · Cited by 4,224
Larminie, J., & Dicks, A. (2003) · Wiley eBooks · doi:10.1002/9781118878330 · Cited by 3,935
Peng, F. Z. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.808920 · Cited by 3,228
(2003) · Focus on Catalysts · doi:10.1016/s1351-4180(03)00256-3 · Cited by 761
High Step-Up Converter With Coupled-Inductor
Wai, R.-J., & Duan, R.-Y. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.854023 · Cited by 611
Harfman Todorovic, M., Palma, L., & Enjeti, P. N. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.911200 · Cited by 263
Single-phase three-level boost power factor correction converter
Zhang, M. T., Jiang, Y., Lee, F. C., & Jovanovic, M. M. (1995) · Proceedings of 1995 IEEE Applied Power Electronics Conference and Exposition - APEC'95 · doi:10.1109/apec.1995.468984 · Cited by 260
Low Cost Fuel Cell Converter System for Residential Power Generation
Wang, J., Peng, F. Z., Anderson, J., Joseph, A., & Buffenbarger, R. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.833455 · Cited by 240
Phosphoric acid fuel cells: Fundamentals and applications
Sammes, N. M., Bove, R., & Stahl, K. (2004) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2005.01.001 · Cited by 236
Analysis for the Effect of Inverter Ripple Current on Fuel Cell Operating Condition
Gemmen, R. S. (2003) · Journal of Fluids Engineering · doi:10.1115/1.1567307 · Cited by 226
A Novel Three-Phase High-Power Soft-Switched DC/DC Converter for Low-Voltage Fuel Cell Applications
Liu, C., Johnson, A., & Lai, J.-S. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2005.858259 · Cited by 211
A three-port bi-directional converter for hybrid fuel cell systems
Michon, M., Duarte, J. L., Hendrix, M., & Simoes, M. G. (2004) · 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551) · doi:10.1109/pesc.2004.1354836 · Cited by 160
A low cost, triple-voltage bus DC-DC converter for automotive applications
Su, G.-J., & Peng, F. Z. (2005) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2005.1453116 · Cited by 112
High-Frequency Link Inverter for Fuel Cells Based on Multiple-Carrier PWM
Krein, P. T., Balog, R. S., & Geng, X. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.833996 · Cited by 106
Cacciato, M., Caricchi, F., Capponi, F. G., & Santini, E. (2004) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2004.1348554 · Cited by 64
Bi-directional dc-dc converter for fuel cell generation system
Jang, S.-J., Lee, T., Lee, W.-C., & Won, C.-Y. (2004) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2004.1354834 · Cited by 61
Optimum fuel cell utilization with multilevel DC-DC converters
Ozpineci, B., Tolbert, L. M., Su, G.-J., & Du, Z. (2004) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2004.1296074 · Cited by 50
Self-citationMultiple input converters for fuel cells
Ozpineci, B., Tolbert, L. M., & Du, Z. (2004) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2004.1348504 · Cited by 37
Self-citation
Cited by
Defects on carbons for electrocatalytic oxygen reduction
Yan, X., Jia, Y., & Yao, X. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00690j · Cited by 593
Recent advances and challenges of fuel cell based power system architectures and control – A review
Das, V., Padmanaban, S., Venkitusamy, K., Selvamuthukumaran, R., Blaabjerg, F., & Siano, P. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.148 · Cited by 459
Recent applications of big data analytics in railway transportation systems: A survey
Ghofrani, F., He, Q., Goverde, R. M. P., & Liu, X. (2018) · Transportation Research Part C: Emerging Technologies · doi:10.1016/j.trc.2018.03.010 · Cited by 320
Zhou, D., Wang, H., & Blaabjerg, F. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2769161 · Cited by 200
Metadata
- Authors
- Yu, X., Starke, M. R., Tolbert, L. M., & Ozpineci, B.
- Venue
- IET Electric Power Applications
- Published
- 2007-09
- Volume
- 1
- Issue
- 5
- Pages
- 643-656
- ISSN
- 1751-8660 (ISSN-L)
- 1751-8679
- OpenAlex
- W2002729971
- Cited by
- 262
- References
- 18
- FWCI
- 14.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.