The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Winding resistance of litz-wire and multi-strand inductors
Abstract
This study presents an approximate model for multi-strand wire winding, including litz-wire winding. The proposed model is evaluated using Dowell's equation. The model takes into account the existence of proximity effect within the litz-wire bundle between the strands and between the bundles, as well the skin effect. The expressions for optimum strand diameter and number of strands at which minimum winding AC resistance is obtained for the litz-wire windings are derived. The boundary frequency between the low-frequency and the medium-frequency ranges are given for both litz-wire and solid-round wire inductors. Hence, the low-frequency ranges of both wire windings are determined. It is shown that litz-wire is better than the solid wire only in specific frequency range. The model has been verified by the measurements, and the theoretical results were in good agreement with those experimentally measured. Comparison of the theoretical predictions of the proposed approximate litz-wire model with models proposed in other publications and with experimental results is given.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Optimizing the AC resistance of multilayer transformer windings with arbitrary current waveforms
Hurley, W. G., Gath, E., & Breslin, J. G. (2000) · IEEE Transactions on Power Electronics · doi:10.1109/63.838110 · Cited by 368
Cited by
Lucia, O., Maussion, P., Dede, E. J., & Burdio, J. M. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2281162 · Cited by 877
Zhang, W., Wong, S.-C., Tse, C. K., & Chen, Q. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2249112 · Cited by 505
Zhang, W., Wong, S.-C., Tse, C. K., & Chen, Q. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2273364 · Cited by 406
100 kW, 10 kHz Medium-Frequency Transformer Design Optimization and Experimental Verification
Mogorovic, M., & Dujic, D. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2835564 · Cited by 274
Control design for optimizing efficiency in inductive power transfer systems
Huang, Z., Wong, S.-C., & Tse, C. K. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2724039 · Cited by 242
Metadata
- Authors
- Wojda, R. P., & Kazimierczuk, M. K.
- Venue
- IET Power Electronics
- Published
- 2012-02
- Volume
- 5
- Issue
- 2
- Pages
- 257-268
- ISSN
- 1755-4535 (ISSN-L)
- 1755-4543
- OpenAlex
- W2018827628
- Cited by
- 217
- References
- 1
- FWCI
- 12.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Winding resistance of litz-wire and multi-strand inductors. https://app.cochat.ai/papers/10.1049/iet-pel.2010.0359
- The paper
- Wojda, R. P., & Kazimierczuk, M. K. (2012). Winding resistance of litz-wire and multi-strand inductors. IET Power Electronics. https://doi.org/10.1049/iet-pel.2010.0359
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.