Review of dc–dc converters for multi‐terminal HVDC transmission networks
Open accessThe DOI matches its Crossref record; 67 of the 67 references it cites were found in a registry or an index.
Abstract
This study presents a comprehensive review of high‐power dc–dc converters for high‐voltage direct current (HVDC) transmission systems, with emphasis on the most promising topologies from established and emerging dc–dc converters. In addition, it highlights the key challenges of dc–dc converter scalability to HVDC applications, and narrows down the desired features for high‐voltage dc–dc converters, considering both device and system perspectives. Attributes and limitations of each dc–dc converter considered in this study are explained in detail and supported by time‐domain simulations. It is found that the front‐to‐front quasi‐two‐level operated modular multilevel converter, transition arm modular converter and controlled transition bridge converter offer the best solutions for high‐voltage dc–dc converters that do not compromise galvanic isolation and prevention of dc fault propagation within the dc network. Apart from dc fault response, the MMC dc auto transformer and the transformerless hybrid cascaded two‐level converter offer the most efficient solutions for tapping and dc voltage matching of multi‐terminal HVDC networks.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A three-phase soft-switched high-power-density DC/DC converter for high-power applications
De Doncker, R. W. A. A., Divan, D. M., & Kheraluwala, M. H. (1991) · IEEE Transactions on Industry Applications · doi:10.1109/28.67533 · Cited by 2,535
Operation, Control, and Applications of the Modular Multilevel Converter: A Review
Debnath, S., Qin, J., Bahrani, B., Saeedifard, M., & Barbosa, P. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2309937 · Cited by 2,210 · cited 1×
“These efforts include all technology chains which are necessary for practical realisation of multi-terminal HVDC networks, such as dc switchgear (dc circuit breakers and fast disconnectors) and high-voltage dc-dc converters [44, 47, 60-76].”
BackgroundInoue, S., & Akagi, H. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.889939 · Cited by 669
Proactive Hybrid HVDC Breakers - A key Innovation for Reliable HVDC Grids
Häfner, J., & Jacobson, B. (2011) · Medical Entomology and Zoology · Cited by 556
Engel, S. P., Stieneker, M., Soltau, N., Rabiee, S., Stagge, H., & De Doncker, R. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2310656 · Cited by 443 · cited 4×
“Again both converter versions require significant filtering at the output dc port, with the tuned filter version reported to require more filtering than the push-pull version[89] .”
BackgroundMethodInfluentialFan, H., & Li, H. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2160652 · Cited by 401 · cited 2×
“In multi-module dc-dc converters, where each sub-module operates at relatively low dc voltage and contributes a small fraction of the total output power, higher fundamental frequency can be achieved at the ac link [79, 80].”
BackgroundIsolated DC/DC Structure Based on Modular Multilevel Converter
Kenzelmann, S., Rufer, A., Dujic, D., Canales, F., & de Novaes, Y. R. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2305976 · Cited by 371 · cited 2×
“These efforts include all technology chains which are necessary for practical realisation of multi-terminal HVDC networks, such as dc switchgear (dc circuit breakers and fast disconnectors) and high-voltage dc-dc converters [44, 47, 60-76].”
BackgroundThe Multilevel Modular DC Converter
Ferreira, J. A. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2237413 · Cited by 371 · cited 1×
“Two versions of the non-isolated dc-dc converter, known as the tuned filter and the push-pull modular multilevel dc converter are presented in [89, 117].”
Gowaid, I. A., Adam, G. P., Massoud, A. M., Ahmed, S., Holliday, D., & Williams, B. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2306453 · Cited by 356 · cited 3×
“4 shows illustrative simulation results from a Q2L operated MMC with the scheme suggested in [95].”
BackgroundMethodSelf-citationHigh-Frequency Operation of a DC/AC/DC System for HVDC Applications
Luth, T., Merlin, M. M. C., Green, T. C., Hassan, F., & Barker, C. D. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2292614 · Cited by 328
Cited by
HVDC Transmission: Technology Review, Market Trends and Future Outlook
Alassi, A., Bañales, S., Ellabban, O., Adam, G., & MacIver, C. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.04.062 · Cited by 476
Self-citationSliding Mode Control of the Modular Multilevel Converter
Yang, Q., Saeedifard, M., & Perez, M. A. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2818657 · Cited by 89
Metadata
- Authors
- Adam, G. P., Gowaid, I. A., Finney, S. J., Holliday, D., & Williams, B. W.
- Venue
- IET Power Electronics
- Published
- 2016-02
- Volume
- 9
- Issue
- 2
- Pages
- 281-296
- ISSN
- 1755-4535 (ISSN-L)
- 1755-4543
- OpenAlex
- W2323152203
- Cited by
- 186
- References
- 67
- FWCI
- 12.35
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.