Review of dc–dc converters for multi‐terminal HVDC transmission networks
Open accessThe DOI matches its Crossref record; 67 of the 67 references it cites were found in a registry or an index.
Abstract
This study presents a comprehensive review of high‐power dc–dc converters for high‐voltage direct current (HVDC) transmission systems, with emphasis on the most promising topologies from established and emerging dc–dc converters. In addition, it highlights the key challenges of dc–dc converter scalability to HVDC applications, and narrows down the desired features for high‐voltage dc–dc converters, considering both device and system perspectives. Attributes and limitations of each dc–dc converter considered in this study are explained in detail and supported by time‐domain simulations. It is found that the front‐to‐front quasi‐two‐level operated modular multilevel converter, transition arm modular converter and controlled transition bridge converter offer the best solutions for high‐voltage dc–dc converters that do not compromise galvanic isolation and prevention of dc fault propagation within the dc network. Apart from dc fault response, the MMC dc auto transformer and the transformerless hybrid cascaded two‐level converter offer the most efficient solutions for tapping and dc voltage matching of multi‐terminal HVDC networks.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A three-phase soft-switched high-power-density DC/DC converter for high-power applications
De Doncker, R. W. A. A., Divan, D. M., & Kheraluwala, M. H. (1991) · IEEE Transactions on Industry Applications · doi:10.1109/28.67533 · Cited by 2,535
Operation, Control, and Applications of the Modular Multilevel Converter: A Review
Debnath, S., Qin, J., Bahrani, B., Saeedifard, M., & Barbosa, P. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2309937 · Cited by 2,210 · cited 1×
“These efforts include all technology chains which are necessary for practical realisation of multi-terminal HVDC networks, such as dc switchgear (dc circuit breakers and fast disconnectors) and high-voltage dc-dc converters [44, 47, 60-76].”
BackgroundInoue, S., & Akagi, H. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.889939 · Cited by 669
Proactive Hybrid HVDC Breakers - A key Innovation for Reliable HVDC Grids
Häfner, J., & Jacobson, B. (2011) · Medical Entomology and Zoology · Cited by 556
Engel, S. P., Stieneker, M., Soltau, N., Rabiee, S., Stagge, H., & De Doncker, R. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2310656 · Cited by 443 · cited 4×
“Again both converter versions require significant filtering at the output dc port, with the tuned filter version reported to require more filtering than the push-pull version[89] .”
BackgroundMethodInfluentialFan, H., & Li, H. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2160652 · Cited by 401 · cited 2×
“In multi-module dc-dc converters, where each sub-module operates at relatively low dc voltage and contributes a small fraction of the total output power, higher fundamental frequency can be achieved at the ac link [79, 80].”
BackgroundIsolated DC/DC Structure Based on Modular Multilevel Converter
Kenzelmann, S., Rufer, A., Dujic, D., Canales, F., & de Novaes, Y. R. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2305976 · Cited by 371 · cited 2×
“These efforts include all technology chains which are necessary for practical realisation of multi-terminal HVDC networks, such as dc switchgear (dc circuit breakers and fast disconnectors) and high-voltage dc-dc converters [44, 47, 60-76].”
BackgroundThe Multilevel Modular DC Converter
Ferreira, J. A. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2237413 · Cited by 371 · cited 1×
“Two versions of the non-isolated dc-dc converter, known as the tuned filter and the push-pull modular multilevel dc converter are presented in [89, 117].”
Gowaid, I. A., Adam, G. P., Massoud, A. M., Ahmed, S., Holliday, D., & Williams, B. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2306453 · Cited by 356 · cited 3×
“4 shows illustrative simulation results from a Q2L operated MMC with the scheme suggested in [95].”
BackgroundMethodSelf-citationHigh-Frequency Operation of a DC/AC/DC System for HVDC Applications
Luth, T., Merlin, M. M. C., Green, T. C., Hassan, F., & Barker, C. D. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2292614 · Cited by 328
VSC-HVDC Transmission with Cascaded Two-Level Converters
Jacobson, B., Karlsson, P., Asplund, G., Harnefors, L., & Jönsson, T. (2010) · Cited by 326
A Modular Multilevel DC/DC Converter With Fault Blocking Capability for HVDC Interconnects
Kish, G. J., Ranjram, M., & Lehn, P. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2295967 · Cited by 263
Reliability Improvement of a T-Type Three-Level Inverter With Fault-Tolerant Control Strategy
Choi, U.-M., Blaabjerg, F., & Lee, K.-B. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2325891 · Cited by 258 · cited 1×
“5, the circuit structure of CTB is similar to that of the T-type inverter discussed in[98, 99], except the series connected switches of the T-inverter between each output pole (a1, b1 and c1) and the neutral-point (O1) are replaced by full-bridge (FB) chain links.”
BackgroundModular multilevel inverter: pulse width modulation and capacitor balancing technique
Adam, G. P., Anaya-Lara, O., Burt, G. M., Telford, D., Williams, B. W., & McDonald, J. R. (2010) · IET Power Electronics · doi:10.1049/iet-pel.2009.0184 · Cited by 248 · cited 1×
“Recent consideration of offshore wind farms by many European countries with real possibilities of building offshore multi-terminal HVDC networks and inter-regional dc grids, has encouraged serious research and development effort from major HVDC manufacturers and academia [1, 8, 12, 43-45, 47-59].”
BackgroundSelf-citationNew Breed of Network Fault-Tolerant Voltage-Source-Converter HVDC Transmission System
Adam, G. P., Ahmed, K. H., Finney, S. J., Bell, K., & Williams, B. W. (2013) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2012.2199337 · Cited by 241
Self-citationA comparison of high-power DC-DC soft-switched converter topologies
Steigerwald, R. L., De Doncker, R. W., & Kheraluwala, H. (1996) · IEEE Transactions on Industry Applications · doi:10.1109/28.536876 · Cited by 231
Merlin, M. M. C., & Green, T. C. (2015) · IET Power Electronics · doi:10.1049/iet-pel.2014.0328 · Cited by 216 · cited 1×
“can offer when compared to well-established high-voltage ac (HVAC) systems[1-15].”
BackgroundA new hybrid multi-level voltage-source converter with DC fault blocking capability
Merlin, M. M. C., Green, T. C., Mitcheson, P. D., Trainer, D. R., Critchley, D. R., & Crookes, R. W. (2010) · 9th IET International Conference on AC and DC Power Transmission (ACDC 2010) · doi:10.1049/cp.2010.0987 · Cited by 210 · cited 1×
“8 shows the A2M2C-DAB dc-dc converter proposed in [101] and [63] that reduces the number of full-bridge cells required per arm when compared with the FB-MMC.”
MethodSelective harmonic elimination pulse‐width modulation of modular multilevel converters
Konstantinou, G., Ciobotaru, M., & Agelidis, V. (2013) · IET Power Electronics · doi:10.1049/iet-pel.2012.0228 · Cited by 197 · cited 2×
“Recent consideration of offshore wind farms by many European countries with real possibilities of building offshore multi-terminal HVDC networks and inter-regional dc grids, has encouraged serious research and development effort from major HVDC manufacturers and academia [1, 8, 12, 43-45, 47-59].”
BackgroundBidirectional, High-Power DC Transformer
Jovcic, D. (2009) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2009.2028600 · Cited by 193 · cited 2×
“11 shows a non-isolated resonant based dc-dc converter with bi-directional power flow capability [113, 114].”
BackgroundAdam, G. P., & Davidson, I. E. A. (2015) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2015.2394387 · Cited by 169
Self-citationVoltage angle lock loop control of the boost type PWM converter for HVDC application
Ooi, B. T., & Wang, X. (1990) · IEEE Transactions on Power Electronics · doi:10.1109/63.53160 · Cited by 169 · cited 1×
“The emergence of voltage source converter high-voltage dc (VSC-HVDC) in the early 1990s [10, 12, 27-46] that can reverse dc power without any difficulty (power reversal is achieved without the need to reverse the dc voltage) has reinvigorated research into generic multi-terminal HVDC networks.”
BackgroundMultiple-Module High-Gain High-Voltage DC–DC Transformers for Offshore Wind Energy Systems
Denniston, N., Massoud, A. M., Ahmed, S., & Enjeti, P. N. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2053340 · Cited by 160 · cited 1×
“These efforts include all technology chains which are necessary for practical realisation of multi-terminal HVDC networks, such as dc switchgear (dc circuit breakers and fast disconnectors) and high-voltage dc-dc converters [44, 47, 60-76].”
BackgroundThe Hybrid-Cascaded DC–DC Converters Suitable for HVdc Applications
Yang, J., He, Z., Pang, H., & Tang, G. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2420666 · Cited by 154 · cited 3×
“Type 2 of non-isolated hybrid cascaded series two-level auto-dc transformer proposed in [120] provides an interesting method for voltage matching and tapping in multi-terminal HVDC networks without the use of coupling transformer.”
BackgroundMethodInfluentialSoft-Switching Operation of Isolated Modular DC/DC Converters for Application in HVDC Grids
Xing, Z., Ruan, X., You, H., Yang, X., Yao, D., & Yuan, C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2448125 · Cited by 138 · cited 1×
“A further soft switching method has been recently proposed in [96].”
MethodModular Multilevel Converter Design for VSC HVDC Applications
Oates, C. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2348611 · Cited by 135 · cited 1×
“These efforts include all technology chains which are necessary for practical realisation of multi-terminal HVDC networks, such as dc switchgear (dc circuit breakers and fast disconnectors) and high-voltage dc-dc converters [44, 47, 60-76].”
BackgroundAdam, G. P., & Williams, B. W. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2315833 · Cited by 133 · cited 1×
“The aforesaid operation makes MMC is the only VSC, where the upper and lower arms of the same phase leg conduct simultaneously, and with co-existence of continuous ac and dc currents in all its arms; with the ac currents are being used to transfer active power from ac side to converter, and dc currents for power trans…”
BackgroundSelf-citationLCL DC/DC Converter for DC Grids
Jovcic, D., & Zhang, L. (2013) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2013.2272834 · Cited by 133 · cited 1×
“These efforts include all technology chains which are necessary for practical realisation of multi-terminal HVDC networks, such as dc switchgear (dc circuit breakers and fast disconnectors) and high-voltage dc-dc converters [44, 47, 60-76].”
BackgroundDC-Link Capacitance Minimization in T-Type Three-Level AC/DC/AC PWM Converters
Alemi, P., Jeung, Y.-C., & Lee, D. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2345354 · Cited by 133 · cited 1×
“5, the circuit structure of CTB is similar to that of the T-type inverter discussed in[98, 99], except the series connected switches of the T-inverter between each output pole (a1, b1 and c1) and the neutral-point (O1) are replaced by full-bridge (FB) chain links.”
BackgroundSoltau, N., Stagge, H., Doncker, R. W. D., & Apeldoorn, O. (2014) · IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG) · doi:10.1109/pedg.2014.6878696 · Cited by 118 · cited 26×
“In this illustration, the fundamental frequency is 500 Hz, both VSC1 and VSC2 are operated using fundamental frequency switching with 180 o conduction, input and output dc link voltages of VSC1 and VSC2 are ±400 kV and ±350 kV respectively, and the power flow direction is from VSC1 to VSC2.”
BackgroundMethodInfluentialForce commutated HVDC and SVC based on phase-shifted multi-converter modules
Zhang, Z., Kuang, J., Wang, X., & Ooi, B. T. (1993) · IEEE Transactions on Power Delivery · doi:10.1109/61.216879 · Cited by 113 · cited 1×
“The emergence of voltage source converter high-voltage dc (VSC-HVDC) in the early 1990s [10, 12, 27-46] that can reverse dc power without any difficulty (power reversal is achieved without the need to reverse the dc voltage) has reinvigorated research into generic multi-terminal HVDC networks.”
BackgroundEcheverria, J., Kouro, S., Pérez, M. A., & Abu‐Rub, H. (2013) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2013.6700293 · Cited by 102 · cited 3×
“Recent consideration of offshore wind farms by many European countries with real possibilities of building offshore multi-terminal HVDC networks and inter-regional dc grids, has encouraged serious research and development effort from major HVDC manufacturers and academia [1, 8, 12, 43-45, 47-59].”
BackgroundEvaluation of Semiconductor Based Methods for Fault Isolation on High Voltage DC Grids
Hajian, M., Jovcic, D., & Wu, B. (2013) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2013.2238260 · Cited by 96 · cited 1×
“These efforts include all technology chains which are necessary for practical realisation of multi-terminal HVDC networks, such as dc switchgear (dc circuit breakers and fast disconnectors) and high-voltage dc-dc converters [44, 47, 60-76].”
BackgroundSingle phase unity power factor control for dual active bridge converter
Kheraluwala, M. H., & De Doncker, R. W. (2002) · Conference Record of the 1993 IEEE Industry Applications Conference Twenty-Eighth IAS Annual Meeting · doi:10.1109/ias.1993.299007 · Cited by 94 · cited 1×
“In high-power applications, the rectifier diodes suffer from high reverse recovery currents, a limited zero voltage switching range of the front end converter FB, and duty cycle loss [65, 77, 83, 108-111].”
BackgroundZhu, J., Guerrero, J. M., Hung, W. W., Booth, C. D., & Adam, G. P. (2014) · IET Renewable Power Generation · doi:10.1049/iet-rpg.2014.0109 · Cited by 91
Self-citationHybrid Multilevel Converter: Capacitor Voltage Balancing Limits and its Extension
Zhang, Y., Adam, G. P., Lim, T. C., Finney, S. J., & Williams, B. W. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2235846 · Cited by 89
Self-citationA new HVDC-DC converter with inherent fault clearing capability
Schön, A., & Bakran, M. (2013) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2013.6631739 · Cited by 88 · cited 3×
“12: (a) and (b) are possible configurations of symmetrical and asymmetrical auto dc transformer (dc-dc converter) [112, 118]”
BackgroundZhang, Y., Adam, G. P., Lim, T. C., Finney, S. J., & Williams, B. W. (2012) · IET Power Electronics · doi:10.1049/iet-pel.2010.0305 · Cited by 86 · cited 1×
“Recent consideration of offshore wind farms by many European countries with real possibilities of building offshore multi-terminal HVDC networks and inter-regional dc grids, has encouraged serious research and development effort from major HVDC manufacturers and academia [1, 8, 12, 43-45, 47-59].”
BackgroundSelf-citationA Family of Soft-Switching DC–DC Converters Based on a Phase-Shift-Controlled Active Boost Rectifier
Wu, H., Lu, Y., Mu, T., & Xing, Y. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2308278 · Cited by 85 · cited 3×
“Several solutions to the reverse recovery current problem of the rectifier diodes, high-voltage ringing and circulating reactive power have been suggested [65, 77, 79, 108].”
BackgroundSeries connected voltage-source converter modules for force-commutated SVC and DC-transmission
Kuang, J., & Ooi, B. T. (1994) · IEEE Transactions on Power Delivery · doi:10.1109/61.296281 · Cited by 75 · cited 1×
“The emergence of voltage source converter high-voltage dc (VSC-HVDC) in the early 1990s [10, 12, 27-46] that can reverse dc power without any difficulty (power reversal is achieved without the need to reverse the dc voltage) has reinvigorated research into generic multi-terminal HVDC networks.”
BackgroundNetwork fault tolerant voltage-source-converters for high-voltage applications
Adam, G. P., Finney, S. J., Williams, B., Trainer, D. R., Oates, C., & Critchley, D. (2010) · IET International Conference on AC and DC Power Transmission (ACDC) · doi:10.1049/cp.2010.0985 · Cited by 73 · cited 1×
“This modification allows the A2M2C to achieve dc fault blocking capability with reduced semiconductor losses when compared to the FB-MMC and hybrid cascaded two-level converter [53, 102-104], and a modest reduction in footprint.”
MethodSelf-citationMultiport DC–DC Autotransformer for Interconnecting Multiple High-Voltage DC Systems at Low Cost
Lin, W., Wen, J., & Cheng, S. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2397172 · Cited by 72
Mixed cells modular multilevel converter
Adam, G. P., Ahmed, K. H., & Williams, B. W. (2014) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2014.6864817 · Cited by 71 · cited 1×
“This modification allows the A2M2C to achieve dc fault blocking capability with reduced semiconductor losses when compared to the FB-MMC and hybrid cascaded two-level converter [53, 102-104], and a modest reduction in footprint.”
MethodSelf-citationAdam, G. P., Finney, S. J., & Williams, B. W. (2013) · IET Generation Transmission & Distribution · doi:10.1049/iet-gtd.2012.0400 · Cited by 64 · cited 1×
“This modification allows the A2M2C to achieve dc fault blocking capability with reduced semiconductor losses when compared to the FB-MMC and hybrid cascaded two-level converter [53, 102-104], and a modest reduction in footprint.”
MethodSelf-citationZhang, Y., Adam, G. P., Finney, S. J., & Williams, B. W. (2013) · IET Power Electronics · doi:10.1049/iet-pel.2012.0403 · Cited by 63 · cited 6×
“Recent consideration of offshore wind farms by many European countries with real possibilities of building offshore multi-terminal HVDC networks and inter-regional dc grids, has encouraged serious research and development effort from major HVDC manufacturers and academia [1, 8, 12, 43-45, 47-59].”
BackgroundMethodResultSelf-citationA modular bidirectional DC power flow controller with fault blocking capability for DC networks
Kish, G. J., & Lehn, P. W. (2013) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel.2013.6626408 · Cited by 60 · cited 1×
“6 kV, 40 MW system in [115]); otherwise, pole-to-ground dc voltage of the low-voltage side will be modulated at the fundamental frequency used to exchange power between converter arms.”
MethodKhan, F., & Tolbert, L. M. (2009) · IET Power Electronics · doi:10.1049/iet-pel.2008.0165 · Cited by 59 · cited 1×
“Recent consideration of offshore wind farms by many European countries with real possibilities of building offshore multi-terminal HVDC networks and inter-regional dc grids, has encouraged serious research and development effort from major HVDC manufacturers and academia [1, 8, 12, 43-45, 47-59].”
BackgroundChen, C., Adam, G. P., Finney, S. J., Fletcher, J., & Williams, B. W. (2015) · IET Power Electronics · doi:10.1049/iet-pel.2014.0513 · Cited by 52 · cited 3×
“ 1 2 2 2 ( ) s in ( ) a a ce ll cre f d v n t V V m t [1, 87].”
BackgroundSelf-citationTransmission network loading in Europe with high shares of renewables
Brown, T. (2014) · IET Renewable Power Generation · doi:10.1049/iet-rpg.2014.0114 · Cited by 46 · cited 1×
“Recent consideration of offshore wind farms by many European countries with real possibilities of building offshore multi-terminal HVDC networks and inter-regional dc grids, has encouraged serious research and development effort from major HVDC manufacturers and academia [1, 8, 12, 43-45, 47-59].”
BackgroundWan, Y., Liu, S., & Jiang, J. (2013) · IET Power Electronics · doi:10.1049/iet-pel.2012.0494 · Cited by 45 · cited 1×
“The emergence of voltage source converter high-voltage dc (VSC-HVDC) in the early 1990s [10, 12, 27-46] that can reverse dc power without any difficulty (power reversal is achieved without the need to reverse the dc voltage) has reinvigorated research into generic multi-terminal HVDC networks.”
BackgroundKandasamy, K., Vilathgamuwa, D. M., & Tseng, K. J. (2015) · IET Power Electronics · doi:10.1049/iet-pel.2014.0943 · Cited by 44 · cited 1×
“Also, the increased dependency of the LCC terminal on the ac network strength has caused significant concerns regarding ac voltage stability of relatively weak ac networks, especially when large power is being exchanged [8, 16-26].”
BackgroundThe transition arm multilevel converter — A concept for medium and high voltage DC-DC transformers
Gowaid, I. A., Adam, G. P., Williams, B. W., Massoud, A. M., & Ahmed, S. (2015) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit.2015.7125556 · Cited by 44 · cited 1×
“d) Dual active bridge based on Transition arm multilevel converter (TAC) Transition arm multilevel converter (TAC) proposed in [100] offers possibilities for further reduction of footprint and semiconductor area in dc-dc converters for multi-terminal HVDC networks, see Fig.”
BackgroundSelf-citationThe use of trapezoid waveforms within converters for HVDC
Oates, C., Dyke, K. J., & Trainer, D. R. (2014) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2014.6910872 · Cited by 40 · cited 2×
“When a CTB multilevel converter is operated as suggested in [97], the switching devices of its main two-level bridge operate at the fundamental frequency; thus, negligible switching loss is incurred in this stage.”
BackgroundSano, K., & Takasaki, M. (2013) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2013.6647038 · Cited by 37 · cited 1×
“These efforts include all technology chains which are necessary for practical realisation of multi-terminal HVDC networks, such as dc switchgear (dc circuit breakers and fast disconnectors) and high-voltage dc-dc converters [44, 47, 60-76].”
BackgroundRecovering the modular multilevel converter from a cleared or isolated fault
Tan, L., & Zhao, C. (2015) · IET Generation Transmission & Distribution · doi:10.1049/iet-gtd.2014.0240 · Cited by 33 · cited 3×
“Recent consideration of offshore wind farms by many European countries with real possibilities of building offshore multi-terminal HVDC networks and inter-regional dc grids, has encouraged serious research and development effort from major HVDC manufacturers and academia [1, 8, 12, 43-45, 47-59].”
BackgroundDC fault ride‐through capability and STATCOM operation of a HVDC hybrid voltage source converter
Feldman, R., Farr, E., Watson, A. J., Clare, J., Wheeler, P. W., Trainer, D. R., & Crookes, R. W. (2014) · IET Generation Transmission & Distribution · doi:10.1049/iet-gtd.2012.0713 · Cited by 31 · cited 1×
“The emergence of voltage source converter high-voltage dc (VSC-HVDC) in the early 1990s [10, 12, 27-46] that can reverse dc power without any difficulty (power reversal is achieved without the need to reverse the dc voltage) has reinvigorated research into generic multi-terminal HVDC networks.”
BackgroundAdam, G. P., Finney, S. J., Ojo, O., & Williams, B. W. (2012) · IET Power Electronics · doi:10.1049/iet-pel.2011.0229 · Cited by 29 · cited 1×
“b) Quasi-two-level (Q2L) operation of MMC-DAB Quasi two-level operation of multilevel converters was initially proposed for diode clamped multilevel inverters [90-93] and later adopted for modular multilevel converters [75].”
MethodSelf-citationExtended configuration of dual active bridge DC–DC converter with reduced number of switches
Sedaghati, F., Hosseini, S. H., Sabahi, M., & Gharehpetian, G. B. (2014) · IET Power Electronics · doi:10.1049/iet-pel.2014.0375 · Cited by 29 · cited 1×
“Also, the increased dependency of the LCC terminal on the ac network strength has caused significant concerns regarding ac voltage stability of relatively weak ac networks, especially when large power is being exchanged [8, 16-26].”
BackgroundA comparison of modular multilevel energy conversion processes: DC/AC versus DC/DC
Kish, G. J., & Lehn, P. W. (2014) · International Power Electronics Conference (IPEC) · doi:10.1109/ipec.2014.6869702 · Cited by 27
New harmonic mitigation scheme for modular multilevel converter – an experimental approach
Madichetty, S., Dasgupta, A., & Mishra, S. (2014) · IET Power Electronics · doi:10.1049/iet-pel.2014.0028 · Cited by 27 · cited 1×
“The emergence of voltage source converter high-voltage dc (VSC-HVDC) in the early 1990s [10, 12, 27-46] that can reverse dc power without any difficulty (power reversal is achieved without the need to reverse the dc voltage) has reinvigorated research into generic multi-terminal HVDC networks.”
BackgroundSubashini, N., Velayutham, D., & Govindarajan, U. (2015) · IET Power Electronics · doi:10.1049/iet-pel.2014.0633 · Cited by 21 · cited 1×
“Also, the increased dependency of the LCC terminal on the ac network strength has caused significant concerns regarding ac voltage stability of relatively weak ac networks, especially when large power is being exchanged [8, 16-26].”
BackgroundPicas, R., Ceballos, S., Pou, J., Zaragoza, J., Konstantinou, G. S., & Agelidis, V. G. (2013) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2013.6700160 · Cited by 16 · cited 2×
“Recent consideration of offshore wind farms by many European countries with real possibilities of building offshore multi-terminal HVDC networks and inter-regional dc grids, has encouraged serious research and development effort from major HVDC manufacturers and academia [1, 8, 12, 43-45, 47-59].”
BackgroundInteroperability of voltage source converters in dc grids
Adam, G. P., Finney, S. J., & Williams, B. W. (2013) · IET Generation Transmission & Distribution · doi:10.1049/iet-gtd.2012.0768 · Cited by 13 · cited 1×
“Recent consideration of offshore wind farms by many European countries with real possibilities of building offshore multi-terminal HVDC networks and inter-regional dc grids, has encouraged serious research and development effort from major HVDC manufacturers and academia [1, 8, 12, 43-45, 47-59].”
BackgroundSelf-citationAnalytical circuit oriented modelling and performance assessment of modular multilevel converter
Nademi, H., & Norum, L. E. (2015) · IET Power Electronics · doi:10.1049/iet-pel.2014.0559 · Cited by 12 · cited 1×
“can offer when compared to well-established high-voltage ac (HVAC) systems[1-15].”
BackgroundModular double‐cascade converter for high‐power medium‐voltage drives
Sankala, A., Korhonen, J., Ström, J., Luukko, J., Silventoinen, P., Komulainen, R., Sarén, H., Södö, N., & Isaksson, D. (2015) · IET Power Electronics · doi:10.1049/iet-pel.2014.0341 · Cited by 12
Interleaved multi-phase ZCS isolated DC-DC converter for sub-sea power distribution
Mohammadpour, A., Parsa, L., Todorovic, M. H., Lai, R., & Datta, R. (2013) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2013.6699257 · Cited by 8 · cited 1×
“These efforts include all technology chains which are necessary for practical realisation of multi-terminal HVDC networks, such as dc switchgear (dc circuit breakers and fast disconnectors) and high-voltage dc-dc converters [44, 47, 60-76].”
BackgroundModular Multilevel Converter Machine Drive using current source H-bridges
Ricardo Lizana, F., Pérez, M. A., Rodríguez, J., & Wu, B. (2013) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2013.6700162 · Cited by 3 · cited 1×
“Recent consideration of offshore wind farms by many European countries with real possibilities of building offshore multi-terminal HVDC networks and inter-regional dc grids, has encouraged serious research and development effort from major HVDC manufacturers and academia [1, 8, 12, 43-45, 47-59].”
Background
Cited by
HVDC Transmission: Technology Review, Market Trends and Future Outlook
Alassi, A., Bañales, S., Ellabban, O., Adam, G., & MacIver, C. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.04.062 · Cited by 476
Self-citationSliding Mode Control of the Modular Multilevel Converter
Yang, Q., Saeedifard, M., & Perez, M. A. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2818657 · Cited by 89
Metadata
- Authors
- Adam, G. P., Gowaid, I. A., Finney, S. J., Holliday, D., & Williams, B. W.
- Venue
- IET Power Electronics
- Published
- 2016-02
- Volume
- 9
- Issue
- 2
- Pages
- 281-296
- ISSN
- 1755-4535 (ISSN-L)
- 1755-4543
- OpenAlex
- W2323152203
- Cited by
- 186
- References
- 67
- FWCI
- 12.35
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.