Power control flexibilities for grid‐connected multi‐functional photovoltaic inverters
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
This study explores the integration issues of next‐generation high‐penetration photovoltaic (PV) systems, where the grid is becoming more decentralised and vulnerable. In that case, the PV systems are expected to be more controllable with higher efficiency and reliability. Provision of ancillary and intelligent services, such as fault ride‐through and reactive power compensation, is the key to attain higher utilisation of solar PV energy. Such functionalities for the future PV inverters can contribute to reduced cost of energy, and thus enable more cost‐effective PV installations. To implement the advanced features, a flexible power controller is developed in this study, which can be configured in the PV inverter and flexibly change from one to another mode during operation. Based on the single‐phase PQ theory, the control strategy offers the possibilities to generate appropriate references for the inner current control loop. The references depend on system conditions and also specific demands from both system operators and prosumers. Besides, this power control strategy can be implemented in commercial PV inverters as a standardised function, and also the operation modes can be achieved online in predesigned PV inverters. Case studies have verified the effectiveness and flexibilities of the proposal to realise the advanced features.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Transitioning to Physics-of-Failure as a Reliability Driver in Power Electronics
Wang, H., Liserre, M., Blaabjerg, F., de Place Rimmen, P., Jacobsen, J. B., Kvisgaard, T., & Landkildehus, J. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2290282 · Cited by 693
Self-citationAnurag, A., Yang, Y., & Blaabjerg, F. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2015.2428432 · Cited by 153 · cited 7×
“B. VAR Operation at Nights Although double-stage PV inverters can extend the operating hours during a day, there is still a gap at nights where the solar irradiance level is almost 0 kW/m2.”
InfluentialSelf-citation
Cited by
Gui, Y., Nainar, K., Ciontea, C.-I., Bendtsen, J. D., Iov, F., Shahid, K., & Stoustrup, J. (2023) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2023.109022 · Cited by 39
Metadata
- Authors
- Yang, Y., Blaabjerg, F., Wang, H., & Simões, M. G.
- Venue
- IET Renewable Power Generation
- Published
- 2016-04
- Volume
- 10
- Issue
- 4
- Pages
- 504-513
- ISSN
- 1752-1416 (ISSN-L)
- 1752-1424
- OpenAlex
- W2211836669
- Cited by
- 182
- References
- 2
- FWCI
- 18.25
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.