The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Analysis of integrated boost-flyback step-up converter
Abstract
The operating principles, theoretical analysis, and design methodology of a high-efficiency step-up converter are presented. The integrated boost-flyback converter (IBFC) uses coupled-inductor techniques to achieve high step-up voltage with low duty ratio, and thus the slope compensation circuit is disregarded. The voltage gain and efficiency at steady state are derived using the principles of inductor volt–second balance, capacitor charge balance and the small-ripple approximation for continuous-conduction mode. Finally, a 35 W, 12 V DC input, 48 V DC output, fsw=40 kHz IBFC has been implemented in the laboratory to validate the theoretical analysis. A design procedure is expounded, and design guidelines for selecting critical components are also presented. It is shown that high voltage gain with high efficiency can be achieved by the IBFC system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fundamentals of Power Electronics
Erickson, R. W., & Maksimović, D. (2020) · Springer eBooks · doi:10.1007/978-3-030-43881-4 · Cited by 5,420
Rashid, R. (1988) · Cited by 2,641
Steady-state analysis of an interleaved boost converter with coupled inductors
Lee, P.-W., Lee, Y.-S., Cheng, D. K. W., & Liu, X.-C. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.857959 · Cited by 498
Novel high-efficiency step-up converter
Tseng, K. C., & Liang, T. J. (2004) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20040022 · Cited by 435
Self-citationApplication of the principle of energy conservation to modeling the PWM converters
Kazimierczuk, M. K., & Czarkowski, D. (2002) · IEEE International Conference on Control and Applications (CCA) · doi:10.1109/cca.1993.348274 · Cited by 57
A new flyback-current-fed push-pull DC-DC converter
Ruiz-Caballero, D., & Barbi, I. (1999) · IEEE Transactions on Power Electronics · doi:10.1109/63.803399 · Cited by 50
Cited by
Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected Applications
Li, W., & He, X. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049715 · Cited by 1,423
Novel High Step-Up DC–DC Converter With Coupled-Inductor and Switched-Capacitor Techniques
Hsieh, Y.-P., Chen, J.-F., Liang, T.-J., & Yang, L.-S. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2151828 · Cited by 326
Self-citationNovel High Step-Up DC–DC Converter for Distributed Generation System
Hsieh, Y.-P., Chen, J.-F., Liang, T.-J., & Yang, L.-S. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2107721 · Cited by 295
Self-citationA Modified SEPIC Converter With High Static Gain for Renewable Applications
Gules, R., dos Santos, W. M., dos Reis, F. A., Romaneli, E. F. R., & Badin, A. A. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2296053 · Cited by 280
A High Step-Up Converter With a Voltage Multiplier Module for a Photovoltaic System
Tseng, K.-C., Huang, C.-C., & Shih, W.-Y. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2217157 · Cited by 272
Self-citation
Metadata
- Authors
- Liang, T. J., & Tseng, K. C.
- Venue
- IEE Proceedings - Electric Power Applications
- Published
- 2005-03
- Volume
- 152
- Issue
- 2
- Pages
- 217-225
- ISSN
- 1350-2352 (ISSN-L)
- 1359-7043
- OpenAlex
- W2006131518
- Cited by
- 263
- References
- 6
- FWCI
- 5.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.