The DOI matches its Crossref record.
High-efficiency DC/DC converter with high voltage gain
Abstract
A high-efficiency converter with high voltage gain applied to a step-up power conversion is presented. In the proposed strategy, a high magnetising current charges the primary winding of the coupled inductor, and the clamped capacitor is discharged to the auxiliary capacitor when the switch is turned on. In contrast, the magnetising current flows continuously to boost the voltage in the secondary winding of the coupled inductor, and the voltages across the secondary winding of the coupled inductor, the clamped capacitor and the auxiliary capacitor are connected in series to charge the output circuit. Thus, the related voltage gain is higher than in conventional converter circuits. Moreover, this scheme has soft-switching and voltage-clamped properties, i.e. the switch is turned on under zero-current switching and its sustainable voltage is comparatively lower than the output voltage, so that it can select low-voltage low-conduction-loss devices and there are no reverse-recovery currents within the diodes in this circuit. In addition, closed-loop control methodology is utilised in the proposed scheme to overcome the voltage drift problem of the power source under the load variations. As a result, the proposed converter topology can promote the voltage gain for a conventional boost converter with a single inductor, and deal with the problem of the leakage inductor and demagnetisation of the transformer for a coupled-inductor-based converter. Some experimental results via examples of a proton exchange membrane fuel cell power source and a traditional battery are given to demonstrate the effectiveness of the proposed power conversion strategy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Review of Nonisolated High-Step-Up DC/DC Converters in Photovoltaic Grid-Connected Applications
Li, W., & He, X. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049715 · Cited by 1,423
Transformerless DC–DC Converters With High Step-Up Voltage Gain
Yang, L.-S., Liang, T.-J., & Chen, J.-F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2022512 · Cited by 808
High-Efficiency DC-DC Converter With High Voltage Gain and Reduced Switch Stress
Wai, R.-J., Lin, C.-Y., Duan, R.-Y., & Chang, Y.-R. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.888794 · Cited by 450
Self-citationOverview of High-Step-Up Coupled-Inductor Boost Converters
Liu, H., Hu, H., Wu, H., Xing, Y., & Batarseh, I. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2532930 · Cited by 432
A Cascaded High Step-Up DC–DC Converter With Single Switch for Microsource Applications
Chen, S.-M., Liang, T.-J., Yang, L.-S., & Chen, J.-F. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2090362 · Cited by 412
A Family of Single-Switch PWM Converters With High Step-Up Conversion Ratio
Ismail, E. H., Al-Saffar, M. A., Sabzali, A. J., & Fardoun, A. A. (2008) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2008.916427 · Cited by 359
Novel High Step-Up DC–DC Converter With Coupled-Inductor and Switched-Capacitor Techniques
Hsieh, Y.-P., Chen, J.-F., Liang, T.-J., & Yang, L.-S. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2151828 · Cited by 326
Novel High Step-Up DC–DC Converter for Distributed Generation System
Hsieh, Y.-P., Chen, J.-F., Liang, T.-J., & Yang, L.-S. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2107721 · Cited by 295
Metadata
- Authors
- Wai, R. J., & Duan, R. Y.
- Venue
- IEE Proceedings - Electric Power Applications
- Published
- 2005-07-08
- Volume
- 152
- Issue
- 4
- Pages
- 793-802
- ISSN
- 1350-2352 (ISSN-L)
- 1359-7043
- OpenAlex
- W2054314463
- Cited by
- 206
- References
- 0
- FWCI
- 4.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.