The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
A Cascaded High Step-Up DC–DC Converter With Single Switch for Microsource Applications
Abstract
This paper proposes a new high step-up dc-dc converter designed especially for regulating the dc interface between various microsources and a dc-ac inverter to electricity grid. The figuration of the proposed converter is a quadratic boost converter with the coupled inductor in the second boost converter. The converter achieves high step-up voltage gain with appropriate duty ratio and low voltage stress on the power switch. Additionally, the energy stored in the leakage inductor of the coupled inductor can be recycled to the output capacitor. The operating principles and steady-state analyses of continuous-conduction mode and boundary-conduction mode are discussed in detail. To verify the performance of the proposed converter, a 280-W prototype sample is implemented with an input voltage range of 20-40 V and an output voltage of up to 400 V. The upmost efficiency of 93.3% is reached with high-line input; on the other hand, the full-load efficiency remains at 89.3% during low-line input.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Novel forward–flyback hybrid bidirectional DC–DC converter
Zhang, F., & Yan, Y. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2009561 · Cited by 184 · cited 1×
“To employs active clamp technique not only to recycle the leakage inductor energy of the transformer but to constrained the voltage stress is crossed the active switch [12-14], however the tradeoff is higher cost and complex control circuit.”
Method
Cited by
Forouzesh, M., Siwakoti, Y. P., Gorji, S. A., Blaabjerg, F., & Lehman, B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2652318 · Cited by 2,123
Overview of High-Step-Up Coupled-Inductor Boost Converters
Liu, H., Hu, H., Wu, H., Xing, Y., & Batarseh, I. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2532930 · Cited by 432
Nonisolated High Gain DC–DC Converter for DC Microgrids
Lakshmi, M., & Hemamalini, S. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2733463 · Cited by 341
Metadata
- Authors
- Chen, S.-M., Liang, T.-J., Yang, L.-S., & Chen, J.-F.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2011-04
- Volume
- 26
- Issue
- 4
- Pages
- 1146-1153
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2165024739
- Cited by
- 412
- References
- 1
- FWCI
- 11.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Cascaded High Step-Up DC–DC Converter With Single Switch for Microsource Applications. https://app.cochat.ai/papers/10.1109/tpel.2010.2090362
- The paper
- Chen, S.-M., Liang, T.-J., Yang, L.-S., & Chen, J.-F. (2011). A Cascaded High Step-Up DC–DC Converter With Single Switch for Microsource Applications. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2010.2090362
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
